Chinese Pulses Suppliers and Manufacturers

Product operation scope : The fingertip oximeter can be used to measure human hemoglobin saturation and heart beat through finger. The product is suitable for use in family, hospital (including clinical use internist/surgery, anesthesia, pediatrics, intensivecare and etc), oxygen bar, social medical organizations, physical care in sports (it can be used before or after sports. Continually monitoring is not commended). Technical parameters: Display format: led spo2:35-99% in two-digit 7-segment digital;pulse ratio:30-240bpm in 3-digit 7-segment digital;pulse wave: 6-segment bargraph;battery voltage low indication: led signals.-fff Power requirements: two aaa size 1.5v alkali battery;ffff Power consumption: less than 40ma.-f Resolution: f+1% for spo2 and f+1 bpm for pulse ratio. Measurement accuracy: f+2% in stage of 70%-99% spo2 and meaningless when stage being smaller than 70%. -+2 bpm for pulse ratio. Measurement performance in weak filling condition: oxyhemoglobin and pulse value can be shown correctly when pulse-filling ratio is 0.5%. Interference resistance capacity against ambient light: deviation is smaller than f+1% between value of oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room. Product properties : Operation of the product is simple and convenient.-fff The product is small in volume, light in weight (total weight is about 50g including batteries) and convenient in carrying.-fff Power consumption of the product is low and the two originally equipped two aaa batteries can be operated continuously for 30 hours.-fff Low voltage warning will be indicated in visual window when battery voltage is so low that normal operation of the oximeter might be influenced.-fff The product will automatically be powered off when no signal is in the product for more than 8 seconds. Suitable for adult and pediatric patient 0.15kg/pc

Product Introduction JMS2-110 impulse relay is suitable for AC counting track circuit as a track relay. Applicable environment (1) Temperature: -40~+60 (2) Relative humidity: not more than 90% (+25) (3) Air pressure: not less than 74.8kPa (equivalent to an altitude below 2500m) (4) Working position: horizontal (5) Vibration: when the frame frequency is 5Hz~55Hz, there should be no resonance; when the frame frequency is 5Hz~30Hz, the amplitude is not more than 0.35mm; when the frame frequency is more than 30Hz~55Hz, the amplitude is not more than 0.12mm; (6) Impact 40~80/time, acceleration is not more than 5g; (7) There should be no harmful gas causing explosion hazard around, and dust-proof measures should be taken. Model meaning

Product Introduction JMS2-110 impulse relay is suitable for AC counting track circuit as a track relay. Applicable environment (1) Temperature: -40~+60 (2) Relative humidity: not more than 90% (+25) (3) Air pressure: not less than 74.8kPa (equivalent to an altitude below 2500m) (4) Working position: horizontal (5) Vibration: when the frame frequency is 5Hz~55Hz, there should be no resonance; when the frame frequency is 5Hz~30Hz, the amplitude is not more than 0.35mm; when the frame frequency is more than 30Hz~55Hz, the amplitude is not more than 0.12mm; (6) Impact 40~80/time, acceleration is not more than 5g; (7) There should be no harmful gas causing explosion hazard around, and dust-proof measures should be taken. Model meaning

UN230 Fingertip Pulse Oximeter â?¢ Major Features Anti-movement, good low-perfusion performance. Pop-up menu to setup alarm limits Small in volumeã??light in weight and convenient in carrying Operation of the product is simple , low power consumption SpO2 value display Pulse rate value display, bar graph display Pulse waveform display The display mode can be changed A pulse rate sound indication With measured data overruns limits and low-voltage alarm function Battery voltage indication Automatically power off function Display format and alarm limits can be saved after power off.

Application:Veterinary Screen:3.5 inch Parameters:SPO2+TEMP OEM/ODM:Acceptable Product:Handheld Pulse Oximeter Model:PC100SV 1. Oxygen saturation, Pulse rate, Pulse intensity,Temperature 2. Easy operation by 3.5" color high lightness LCD display, lightness is adjustable 3. Anti-motion artifacts, anti-perfusion 4. Unique Large Font and Waveform display 5. Dynamic data and Graphic trends to view 6. Audio and Visual alarm More information,please contact us!

Anti-movement, good low-perfusion performance. Pop-up menu to setup alarm limits Small in volumeã??light in weight and convenient in carrying Operation of the product is simple , low power consumption SpO2 value display Pulse rate value display, bar graph display Pulse waveform display The display mode can be changed A pulse rate sound indication With measured data overruns limits and low-voltage alarm function Battery voltage indication Automatically power off function Display format and alarm limits can be saved after power off.

The thick strips of meat are green and tender cowpea seeds The variety is the earliest medium-early-mature breed,exclusivelyselectedby our company.It is characterized by abundant branches,strong growthpotential, sprouting in vines.The plant is 3.5m highwith short knobs andunlimited pod bearing trait.The pod is about33-37 cm long, and1.3cmthick.The pod is of light green,thickflesh,less fiber,ageing resistance andhigh yield.The cultivation period is long enough,the productivity can beabove 8000kg per mu.

1. 5XFS-series Air-screen Cleaner consists of Bucket Elevator, Dust Catcher, Vertical Screen, Vibration grader and Grain Exits. 2. It can clean the light impurity through vertical air screen according to grainâ??s aerodynamic feature, then the material will enter vibration sieve, which can clean big and small impurities by different types of highly precise punching sieve in accordance with different sizes of grains. 3. The material can be classified into big and small particles with three-layer sieves, and with four-layer screening machine, the product can be divided into big, middle and small grains.

Rapid detection kit, ribonucleic acid detection reagent, medical syringes, medical mask, medical ventilator, medical glove, medical isolation gown, surgical gown level 3+4, protective gown (overall ), oximeter, other medical products.

Specifications This Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology integrated with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for use in family, hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising) Function Display of Sp02 value Display of pulse rate value and bar graph Display of Pl value (optional) Display of pulse waveform Battery power indication (optional) Low-voltage indication: the low power indication symbol appears when the voltage is too low to work Auto Power On Auto standby The display mode can be changed (optional) Adjustable screen brightness (optional) PR sound prompt (optional) Sound prompt (optional) Automatic direction-changing function (optional) Product Name - Portable Smart Finger Pulse Oximeter Model - CMS50-PRO Shell Color - Green Material - Plastic

Pulses.

Its Zoe from Lijiang Technology, we are professional medical product development company located in Shenzhen. our product includes oximeter, blood pressue momitor, clinical infrared thermometer. for more detials. Oximeter Pulse Oximeter is a non-invasive device intended for the spot-check of oxygen saturation of arterial hemoglobin (SpO2) and the pulse rate of adult and paediatric patients in home and hospital environments (including clinical use in internist/surgery, anaesthesia, intensive care ect.) Function SpO2 value display Pulse rate value display, bar graph display

Features: It is small, light and easy to carry Accurately measures spo2 value and pulse rate Lcd display of spo2, pulse rate and pulse intensity by bar-graph Automatic power-off if finger off longer than 8 seconds More than 50 hours continuous working time with 2aaa alkaline batteries Low battery voltage indication Features: It is small, light and easy to carry Accurately measures spo2 value and pulse rate Lcd display of spo2, pulse rate and pulse intensity by bar-graph Automatic power-off if finger off longer than 8 seconds More than 50 hours continuous working time with 2aaa alkaline batteries Low battery voltage indication

Screen Display:1.1" full color OLED Multi-directional display:4 directions Pulse Rate (PR) Perfusion Index (PI) Pulse Bar Display Plethysmogram Display Automatic Start Automatic Power-off Alarm Power Supply:2*AAA alkaline battery Continuous Working Time:Approx. 30 hours (depending on battery quality).

1).Compact and beautifully designed,easy to carry. 2).Can dispay the waveform of SPO2 and the datas of SPO2 & PR. 3).With the functions of alarm upper and lower limit setup, brightness and volume adjustment. 4).Have the trend map and trend palyback funtions.

1. Our pulse oximeter is mono-color lcd display, one display mode 2. Spo2, pr 3. Three color select for our fingertip pulse oximeter 4. Low power consumption, continuously work for 50 hours with two aaa batteries 5. Low perfusion&le 0.4% four medical oximeter 6. Our fingertip pulse oximeter can be used at home or in the hospital. Package size:8.3*6.0*3.8cm, weight:52g..

Integrated with SPO2 probe and processing display module Can be used in: hospital, home, community medical treatment, sports healthcare, etc. Can measure SPO2 and PR accurately SPO2 and PR display, bargraph display Battery voltage low indication Low power consumption; shut off automatically when no signal Small volume(57(L) ¡Á 33(W) ¡Á32(H) mm)light,convenient to carry.