Tufflex Screen The aperture shapes of Tufflex Screen are similar to woven wire, square or rectangular, and the construction varies with either fully or partially welded. The aperture range is 1.5mm to 45mm, with a wire rope diameter range from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide. The poly sheets can be welded on for hot spot impact protection or enhanced abrasion protection along the hooks. The installation of Tufflex is the same as any cross-tension screen. The hooked edges of the Tufflex allow for fitment into existing tension set-ups without any structural modifications. Centre hold-down holes are easily accommodated. Tufflex as light, easy to handle and depending on the application possesses a longer wear life than higher tensile woven wire. The brightly coloured material is lightweight and smooth, which makes it much easier to handle when delivering, storing, installing or removing.
Flexible Polyurethane Mesh Screen Flexible Polyurethane Mesh Screen offer an extended wear life, given their flexible nature and polyurethane coating.�Customers have reported between four and 10 times the life expectancy, dependent on product, regional conditions and finished product size.�Not only does this extend the initial screen cost over a longer period, it also offers a substantial increase in production time available.�Reducing the requirement to stop multiple times a year for change-overs has provided Tufflex customers with increased capacity equating to $10,000 to $20,000 of increased finished product.�This is without accounting for the labour and machine hire savings. When next assessing your choice of screen, consider the wider picture.�Comparing the price of the screens is important, as are the potential savings and increased production time available if you dont have to stop. due to the smooth surface of the polyurethane wire screen. The unique design and construction of the Polyurethane screen also results in lower operating noise. The request for a longer service life is addressed by the Polyurethane screens wear resistant wire ropes that are fusion-welded together. In several applications, the service life was increased up to six times compared with traditional high tensile wire screens. Polyurethane Mesh Screen is the original and still the best poly coated, welded screening media.
Polyurethane Screen Mesh Polyurethane coated stainless steel wire rope screen also named Tufflex Screen with the same open area as woven wire and huge advantages over traditional screens. Tufflex as a problem solving screen media, designed to reduce screen wear, pegging, blinding, dust, noise and screen installation issues. However, for high volume production facilities, hi-tensile screens can restrict output, are short-lived and can be costly and cumbersome to change. Tufflex addresses all of these important issues. Tufflex can be rolled up and thrown on a shoulder without the fear of sharp edges or having to take two operators. Tufflex is also quieter when in operation, which can be very important if the quarry is in a built-up area. Polyurethane Coated Steel Wire Rope Screen can last over twice as long as traditional woven wire mesh. The performance is different from traditional wire, rubber and poly screens due to a combination of the poly/wire construction and the fully/partially weld features. Along with a longer lifespan, Tufflex also makes less noise than its wire counterpart, with less sound emanating from clashing objects on the screen. Polyurethane Coated Steel Wire Rope Screen produces less pegging and blinding, particularly amongst its range of partially welded screens, as the secondary vibration effects, along with the smooth finish of the poly, and the movement between wires can stop material from staying on the surface. Polyurethane Coated Steel Wire Rope Screens main feature is its wear resistant polyurethane wire ropes, fusion welded together. The mesh has sheet metal formed hooks on opposite sides, like traditional tension screen cloths. The material in the hooks can be either mild steel or stainless steel.
Tufflex Screen Mesh The Polyurethane Screen cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer periods between changeover and less downtime during busy screening periods. Polyurethane Tufflex Screens have been documented to last up to 10 times longer than traditional woven wire screens, because the flexible and smooth nature of the materials allow it to move with the passing material. The impact effect is reduced, allowing longer wear life. The flexibility of the screen prevents sticking and blinding. Thus, the screens continue to perform at maximum efficiency without having to stop for cleaning. The increased run time adds up to considerable volume upside across the year for the same overhead cost structure.
Tufflex Screen Mesh Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens. The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering. This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required. The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top, running in a cross-flow orientation, or positioned underneath the rope with the wire. Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck. Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths. The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflexs cloth construction. The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer periods between changeover and less downtime during busy screening periods. The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes, similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide. The construction varies with either fully or partially welded wires. Sheets of poly can also be welded on for hot spot impact protection or enhanced abrasion protection along the hooks.
Rectangular Welded Tufflex Tufflex polyurethane screens come in fully welded, partially welded and rectangular welded variations. The brightly coloured material is lightweight and smooth, which makes it much easier to handle when delivering, storing, installing or removing. Screening innovation in the past has been limited to tweaks and modifications, slightly different apertures or better hooking. The introduction of Tufflex screens a few years ago was akin to the introduction of smartphones versus traditional mobile phones. We never really knew we needed a phone with a camera, a GPS and in-built games, but now its hard to imagine life without one. Just as smartphones cover off the traditional functionality of making phone calls, Tufflex is used for screening product in the quarry market. It offers improved screening efficiency, substantially increased wear life, increased production uptime and occupational health and safety (OHS) benefits due to its light weight and flexibility. While there are a set range of apertures (1.5mm to 45mm square) to choose from, the Tufflex process has great flexibility in manufacturing unique aperture combinations to rope diameters and aperture slot lengths. For example, in some quarry plants in Japan, a 14 aperture screen is used as the bottom deck for their No. 5 spec (20mm to 13mm) or the top deck for the No. 6 spec. The Tufflex specification is an 8mm rope on top and a 6mm rope from hook to hook, a combination not available in traditional woven wire. Long-slotted apertures, ie 8 x 340mm, are used in some side-tensioned equipment where flexibility of the screening surface is needed. This type of aperture, while possible to weave in wire, would not have the mechanical stability for a vibrating application, whereas Tufflex screens were developed with this in mind. These larger configurations can also be used as an alternative to harp/piano screens.
Polyurethane Vibrating Screen Mesh Polyurethane Vibrating screen Mesh come in fully welded, partially welded and rectangular welded variations. The brightly coloured material is lightweight and smooth, which makes it much easier to handle when delivering, storing, installing or removing and possesses a longer wear life than higher tensile woven wire. The polyurethane screens last over twice as long as traditional woven wire mesh. The performance is different from traditional wire, rubber and poly screens due to a combination of the poly/wire construction and the fully/partially weld features. Along with a longer lifespan, Tufflex also makes less noise than its wire counterpart, with less sound emanating from clashing objects on the screen. Tufflex produces less pegging and blinding, particularly amongst its range of partially welded screens, as the secondary vibration effects, along with the smooth finish of the poly, and the movement between wires can stop material from staying on the surface. The aperture shapes are similar to woven wire, square or rectangular, and the construction varies with either fully or partially welded. The aperture range is 1.5mm to 45mm, with a wire rope diameter range from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide. Get quotation:
Cone Strainer Mesh Material: ASTM A 240,ASTM A 666,SUS304.SUS304L.SUS316.SUS316L wire .Brass wire.copper wire,bronze wire. Mesh. 20mesh-325mesh Diameter size :6.00mm-600mm woven mesh types: plain weave,twill weave ,dutch plain weave mesh and fine wire mesh.etc . Manufacture and characteristic: Becomes on the rammingmachinery through the mold ramming. The shape has the circle, theside, rectangle, the ellipse, the bowl, cap model and so on. The product has the outlook size standard, filters the precision to be good,characteristic and so on easy to operate. Cone wire mesh strainer Use: Widely uses in the Refrigeration of air conditioning systems ,Auto fuel strainer systems ,chemical fiber profession spinning jet, the rubber, the drugs manufacture,brews alcohol, the drink and filtersthe mechanical profession filtering .
Filter Cylinder Mesh Material:ASTM A 240,ASTM A 666,SUS304.SUS316.SUS316L Woven types :plain woven.dutch woven. Mesh of microns size :4 microns to 450 microns! Layer:single layer,double layer,multilayer.annealed layer Mesh counts:10mesh-400mesh;12/64 mesh-100/600mesh Tube diameter:10-300mm Wire diameter:0.05-1.0mm Tube height:10-1500mm Engineer Craft: The argon arc welding The spot-welded together The bind with aluminum ,copper plate or Stainless steel plate edge Application: Petrochemical Pharmaceutical Rubber Plastic Mining Chemical Food Scientific Research Aviation water treatment agriculture industry Oil paint spraying equipment liquid steam and aggressive environment
Filter Disc Mesh Material:ASTM A 240,ASTM A 666,SS304,SS316.SS316L,SUS304.SUS316.SUS316L.Brass wire .Copper wire.Aulum. Woven types :Plain woven.Dutch woven. Bound edge width :1.5mm.1.8mm,2.0mm,3.0mm.in normal working . Bound edge plate thickness :0.4mm,0.5mm.0.8mm. Layer:single,double,Three,multilayer. Disc Diameter:4.2mm, 5mm,6mm.8mm.9.5mm,10.8mm.12.7mm.15mm.21mm,37mm,55mm,60mm,65mm,90mm. 101mm,150mm.250mm.300mm and so on . Mesh of size : 400 microns = 40 mesh screen 250 microns = 60 mesh screen 200 microns = 80 mesh screen 130 microns = 120 mesh screen 115 microns = 140 mesh screen 75 microns = 200 mesh screen Others size we can process and made of your offer and request. Application: Chemical fiber Coffee filtration. Oil & Fuel Filters Suction line strainers Filters for Polyester fiber production Microfiber,leather. Water Purification and filtration woven fabrics,color masterbatch, plastic and rubber ,PVC granulation, sheet extrusion, carbon fiber. Pressure line filters.
Copper Woven screen Material: Copper wire Weaving methods: Plain weave. Specifications: Wire diameter: 1.0mm-6.5mm Hole size:2",1 1/2",1 1/4" ,1",7/8",3/4",1/2",3/8",1/4",3/16" ande so on.or as your requested Width:0.914M, 1M, 1.5M.3mm. Length/roll:30M or your request offer. Application: Brass and phosphor bronze are frequently used in sieving diversified pellet, powder, porcelain clay and glass, chinaware printing, filtering liquid and gas. Brass mesh is woven by Brass wire, phosphor bronze wire, or copper wire. It is used for separation and sifting kinds pellet, grain, porcelain earth and glass, chinaware printing and filter liquid
Phosphor Bronze Wire Mesh Material: Phosphor Bronze wire Weaving methods: Plain weave, twill weave. Specifications: phosphor bronze wire cloth 2mesh-200mesh/inch Width:0.914M, 1M, 1.5M.1.8m Length/roll:30.5M Bronze is more abrasion resistant than brass and copper for a longer service life. This wire cloth is often used in marine environments because it is more resistant to corrosion from salt water than stainless steel. Application: Brass and phosphor bronze are frequently used in sieving diversified pellet, powder, porcelain clay and glass, chinaware printing, filtering liquid and gas.separation and filtration, infill panels, room dividers, jewelry, ceiling panels, etc Phosphor bronze wire mesh is used within various niche markets such as the security paper industry (for dandy roll clothing to emboss watermarks), for cloth filters and belts, for electromagnetic interference shielding, for electrical parts of products, wind tunnels (to test airplane aerodynamics) and for house architecture.
Copper wire Mesh Material: Copper wire Weaving methods: Plain weave, twill weave. Mesh :2mesh -200mesh . Width of Copper wire cloth: 0.5-2 m (can be customized). Length of Copper wire cloth: 10-50 m (can be customized). Hole shape: square EdgeTypes: cut edge. Copper is nonsparking and nonmagnetic. It is often used in marine environments because it is more resistant to corrosion from salt water than stainless steel. For used as the shielding screen in the cable circuits, laboratories, computer rooms. The red copper woven wire cloth can be used as the RFI and EMI shielding net in the electronic devices, power sector, aerospace, information industry, military installations. The red copper woven wire cloth can be used in the building walls to insulation noise. The red copper woven wire cloth can be used in the electronic display to filtering the electron beam.
Brass Wire Mesh For premium grade base material bought by the Famous factory or Great Reputaion of the industry.Comprised of zinc and copper, brass woven wire mesh is commonly often used in filtration and separation applications. It is abrasion resistant and harder than copper mesh. Material: 65 brass (65% copper and 35% zinc). 70 brass (70% copper and 30% zinc). 80 brass (80% copper and 20% zinc). Weaving methods: Plain weave, twill weave. Mesh :4mesh -200mesh . Width of brass mesh/cloth: 0.5-2 m (can be customized). Length of brass mesh/cloth: 10-50 m (can be customized). Hole shape: square,rectangle. Color: Golden. EdgeTypes: Closed edge and cut edge. Application: Brass mesh is woven by Brass wire, It is used for separation and sifting kinds pellet, grain, porcelain earth and glass, chinaware printing and filter liquid.
Stainless Steel Crimped Wire Screen The Stainless Steel Crimped wire mesh,Let the mold tools Processing the crimped wire processing crimped wire . Then to woven for mesh or Screen Weaving patterns: double crimp screen,single intermediate crimp screen,double intermediate crimp screen,Lock Crimp screen. Applications - Vibrating tray screens - High pressure filters - Cooling circuit filters - Grids and trays for thermal treatments - Decoration
Stainless Steel Fabric Screen. Generally, For used the crimped with flat wire to woven processing .it can be weaved into a variety of unique patterns. And some woven type make the woven wire mesh like architectural floor or plate.With beautiful colors, fashionable atterns, concise style, good function, our architectural woven mesh has been adopted by more and more designers and architects used as interior and exterior decoration. Specification Material: stainless steel, copper, bronze, brass. etc.. Surface treatment: titanizing, Brass coated, nickeling.etc. Color: original metallic color or spray into other colors. Wire Diameter: 0.2mm-4.00mm Width: 1m-3m Length: 1m-6m with standards ,Others size ,According to custom's requirment. Application outer and inside decoration,For service to the balcony, corridor, elevator, hotel, restaurant, office, building, grand ballroom, museum, concert halls, dining hall, exhibition halls, shopping mall, airport access, theater, etc.
Stainless Steel Rectangular Woven Screen The Stainless steel wire mesh is made of the SS wire to woven , also called Stainless steel woven mesh Screen , To made the square hole with plain weave. The Stainless steel wire mesh and screen mesh is nice mold tools for cirmped wire then processing and weave .To make sure the hole or mesh have uniform size ,smooth and beautiful mesh screen for suitable to filter industrial. The Material Have SS 304, 304l, 316, 316l . The Weaving Type: Plain Weave. The Woven Mesh Width : 1m-1.5m rectangular crimped mesh
Stainless Steel Architectural Screen Generally, For used the mold tools to crimped wire to woven processing .it can be weaved into a variety of unique patterns. And some woven type make the woven wire mesh like architectural floor or plate.With beautiful colors, fashionable atterns, concise style, good function, our architectural woven mesh has been adopted by more and more designers and architects used as interior and exterior decoration Specification Material: stainless steel, copper, bronze, brass. etc.. Surface treatment: titanizing, Brass coated, nickeling.etc. Color: original metallic color or spray into other colors. Wire Diameter: 1.0mm-4.00mm Width: 1m-3m Length: 1m-6m with standards ,Others size ,According to custom's requirment. Application outer and inside decoration,For service to the balcony, corridor, elevator, hotel, restaurant, office, building, grand ballroom, museum, concert halls, dining hall, exhibition halls, shopping mall, airport access, theater, etc.
Stainless Steel Cable Mesh Architectural cable mesh made of cable wire woven across the metal rods ,which structure is strong and very easy to folding. The rods provide stability, while the ropes maintain the stiffness and high strength. And the material of architectural cable mesh has unlimited durability, can bear the stress and deformation without damage. Specification Material: stainless steel (AISI 304L, AISI 316L), brass, copper,etc. Cable diameter: 0.30 mm - 4.00 mm. Cable pitch: 3mm - 110 mm. Rod diameter: 0.2 mm - 4 mm. Rod pitch: 3mm -14.5 mm. Open area: 20% - 66%. Color (standard): primary color, other colors also available. Feature With versatility and durability, architectural cable mesh provides a new decoration style for constructions. It offers a variety of color changes with light and gives people unlimited imagination.Stable structure and not deformation.Light diffusion and good ventilation.Unique texture and uniform mesh hole.Beautiful appearance and various color.Protecting and decorative effects.Gorgeous and high-end.Durability and flexibilit Applicationï¼?outer and inside decoration,For service to the balcony, corridor, elevator, hotel, restaurant, office, building, grand ballroom, museum, concert halls, dining hall, exhibition halls, shopping mall, airport access, theater, Conveyor Belt for the Barnyard millets food .etc.
Stainless Steel Welded Rolls Mesh The Stainless steel welded wire mesh is producting of Stainless Steel wire to Welded for The mesh , The hole or mesh smooth,nice surface and strong structural .Never no rust .better than galvanized welded wire mesh. The Small wire diameter can done the roll mesh ,Called Stainless Steel welded Roll mesh . Material : stainless steel wire SS201.SS202.SS302.SS304. SS 304L .SS 316 SS 316L Mesh Wire Diam Inch mm BWG mm 1/4" 1/4" 6.4mm 6.4mm 22# - 24# 0.7mm - 0.6mm 3/8" 3/8" 10.6mm 10.6mm 19# - 22# 1.0mm - 0.7mm 1/2" 1/2" 12.7mm 12.7mm 16# - 23# 1.6mm - 0.6mm 5/8" 5/8" 16mm 16mm 18# - 21# 1.2mm - 0.8mm 3/4" 3/4" 19.1mm 19.1mm 16# - 21# 1.6mm - 0.8mm 1" 1/2" 25.4mm 12.7mm 16# - 20# 1.6mm - 0.9mm 1" 1" 25.4mm 25.4mm 14# - 21# 2.0mm - 0.8mm 11/2" 11/2" 38mm 38mm 14# - 19# 2.0mm - 1.0mm 1" 2" 25.4mm 50.8mm 14# - 16# 2.0mm - 1.6mm 2" 2" 50.8mm 50.8mm 12# - 16# 2.6mm - 1.6mm Technical Note: 1,Standard roll length: 30m;width: 0.5m to 2.5m 2,Special sizes available at request 3,Packing: in waterproof paper in rolls. Custom packing available at request Special specifications can be customized. Characteristics: It has the good property of corrosion-resisting and oxidation-resisting. Usage: It is widely used on the industry, agriculture, building, transportation, mine, field, lawn, cultivation, Professions guard,decorate, machine protection etc.