3D geomat for erosion control and slope protection Specification: 1)Erosion control mats 2)Polyethylene (PE) 3)Tensile strength:0.8 ~ 3.5kn/m. 4)220-480g/m2 5)thickness:10~20mm Features: It is a kind of high polymer synthetic material made of 3D mesh structure, 3D geomat, quality of a material is loose, flexible, with 90% of the space can fill soil,sand,the roots of the plants are grown through them balanced, the growth of grass make gauze pad, turf, soil surface firmly together, because the plant roots can be extended into the surface of the 30-50 cm, so the formation of a solid layer of green composite coating. Application: 1. Before the greensward grows, 3D GEOMAT prevents the surface of the land from the erosion of the wind and rain. 2. Form compound protection layer with the vegetable, standing the wash-out of the high water level and large speed current. 3. Replace the concrete, asphalt, and block, using in the slope surface protection of roadway, railway, river-way, dyke, and the hillside, etc. 4. For erosion control and slope protection of dams, river banks, channels, landfill and pond edge protection.
Multilayer composite paper DMD,Flexible Insulation DMD,Insulating paper DMD,Flexible composite DMD. Details: Multilayer composite paper are comprised of two or more materials that make up a composite. Multilayer composite paper are most commonly used in applications where a thin layer of insulation is required. These applications typically require the material to be bent, formed, or simply punched into a shape that fits into a confined space. Typically applications include layer insulation in transformer coils, slot insulation in motors, turn-to-turn insulation in power generators, and phase-to-phase insulation in low voltage circuit breakers. These products have good dielectric property and good mechanical property DM Dacron/Mylar DMD Dacron/Mylar/Dacron DMD-F Dacron/Mylar/Dacron class F adhesive DMDM Dacron/Mylar/Dacron/Mylar DM is a two-layer flexible composite material.It is composited with Polyester non-woven fabric and Polyester film. DMD consists of two layers of high density polyester non-woven fabric and a single layer of polyester film in the center. DMDM is four layers flexible laminates. Froduct Features: Thermal class: DM DMD DMDM B class insulation(130�°C) DMD-F class insulation(155�°C) D-Dacron :Polyester non-woven fibric M-Mylar:Mylar,Polyester(PET)film IEC 60674 Standard. Avaiable Available thickness and width DM 0.15/0.17/0.19/0.25/0.32/0.37mm DMD 0.088/0.15/0.17/0.20/0.23/0.25/0.27/0.30/0.35/0.37/0.45mm DMD-F 0.088/0.15/0.17/0.20/0.23/0.25/0.27/0.30/0.32/0.37/0.45mm DMDM 0.25/0.30/0.35mm Normal width:1000mm Strips available on request,the minimum width is 5mm Inner diameter:76mm plastic core. About 55kg/roll. Color:DM DMD DMDM White color DMD-F:Normal color is light pink.Special color can be provided on request. Characteristics and Application :Temperature classification is B,F,H.These products has excellent mechanical strength and excellent electrical property.use in electric motor,transformer etc. through ISO 9001.UL,SGS, RoHS certification. .
19*19*38 Cross-Recess Fiberglass Grating Mould 38# FRP Grating Machine. 38# FRP Grating Machine: Basic info. FRP grating machine adopts hydraulic lifting system,mainly used to make different designs FRP Grating.It has its own mould shape and size, however, the general structure is same.This grating machine mainly includes three parts:Grating mould,Heating system and Accessory equipments. 1.Ejector rod lifting device is two cylinder to parallel advance ,smooth ,no waving. 2.Stripping plate and stripping beam adopt elasticity connection,go up and down is parallel and steady. 3.The module using delicate 45# steel,grinding,polishing and the surface is plating.It has antiseptic function,smooth and easy to demould. 4.Ejector rod can go up and down along with lifting device,easy to change and easy maintenance. 5.Micro mesh Fiberglass FRP moulding grating machine,frp grating automatic machine,frp moulding machine 7.Mould temperature rise and drop are achieved by rectangular copper pipe, which have large contact area with template, temperature rise and drop fastly,and it can heat the mould top surface. In terms of the four borders of the mould,it is anti-corrosion and durable. Reinforced Steel Factory GRP Molded Cutting FRP Grating Machine FRP Grating Machine 1.The FRP grating is integrally constructed for a high strength. The specific gravity is 1.8g/cm3.Its specific gravity is only 1/4 of steel, 2/3 of aluminium. FRP grating distributed evenly loading to all parts on it. The strength is 10 times as much as hard PVC, the absolute strength is more than aluminium, reach the normal steel's level. 2.FRP grating offers lower cost than steel, long life(more than 20 years), no maintenance, although the first investment is higher than common carbon steel. So it is more economic in terms of the total benefit. 3.FRP grating resilience, it can make the workers standing on comfortable. Reinforced Steel Factory GRP Molded Cutting FRP Grating Machine
Sintered stainless steel mesh filter is a new type of filter material made of multi-layer metal woven wire mesh through special lamination pressing and vacuum sintering. The meshes of each layer of wire mesh are interlaced to form a uniform and ideal The filtration structure has excellent filtration accuracy, filtration resistance, mechanical strength, wear resistance, heat resistance, cold resistance and processability, especially ideal for filtration that requires high compressive strength and uniform filtration precision. Parameters: Material: 316L stainless steel Filtration accuracy: 0.22-100um Size: standard or customized Application: (1) Used as dispersion cooling material in extremely high temperature environment; (2) Orifice plate material for gas release liquid fluidized bed; (3) Used for high-precision, high-reliability high-temperature filter materials; (4) Used for high pressure backwash oil filter. Examples: (1) Precision filtration of various hydraulic oils and lubricating oils in the machinery industry; (2) Filtration and purification of various polymer melts in the chemical fiber film industry, filtration of various high-temperature corrosive liquids in the petrochemical industry, filtration, washing and drying of materials in the pharmaceutical industry; (3) Application of gas homogenization in powder industry, fluidized plate in steel industry; (4) Buzzer, etc. in explosion-proof electrical appliances; (5) Gas-solid, liquid-solid, gas-liquid separation. Performance advantages: 1. High strength and rigidity: high mechanical strength and compressive strength; 2. High precision, uniform and stable: uniform filtering performance can be achieved for the filtering particle size with a precision of 1~300 m, and the mesh does not change during use; 3. Wide range of use environments: It can be used for filtration in temperature environments ranging from -200 C to 650 C and acid-base corrosive environments; 4. Excellent cleaning performance: good countercurrent cleaning effect, can be used repeatedly, and long life (can be cleaned by countercurrent water, filtrate, ultrasonic waves, dissolution, baking, etc.).
Material: Galvanized iron wire or stainless steel wire. Hexagonal Wire Netting is widely used in industrial and agricultural constructions as well as in building works and all those made for the purpose of reinforcing and fencing as protective cage, boiler cover in resisting to heat or cold, floor concrete reinforcement. It is also used as fence for poultry cage, fishing pool, children playground and family decorations.
Paper Mill Outflow Pressure Screen/Coarse Screen/Fine Pressure Screen Used for fine screening waste pulp and all kinds of coarse and fine pulp. 1. The rotor is rotated outside of the sieve drum, and the heavy impurities flow away from the sieve drum to avoid clogging the screen cut and prolong greatly the service life of sieve drum. 2. It has low pulse, high screening efficiency and reliable operation. Features: This equipment can be fitted with energy-saving rotors: coarse screening. Rotor, fine screening rotor and headbox screening rotor. Corresponding shell body and screen cylinder can match each Different rotor, thereby achieving screening different pulp kinds with High screening efficiency and low power consumption.
Specification HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Description: HTM Series is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. Supplied in a variety of finishes, the substantial layers of HTM Series meet the requirements for A2 classification (insulation, MgO and plasterboard, and anything you wanted). The product is used to optimize the thermal performance and fire properties of systems in a number of ways. These include enhancing the thermal performance of the ventilated and addressing thermal bridging in the . HTM Series is also useful in minimizing thermal bridges around windows in areas such as window reveals and roller shutter cases.
Oxy-gasoline handgrip cutting machine Packing list: A gasoline handgrip cutting torch ff qz30optional+ A gasoline handgrip cutting torch ff qz100optional+ A gasoline handgrip cutting torch ff qz300+ An explosion suppression gasoline tank; 10 meters oil-resistant rubber hoselonger hose optional; 4 cutting nozzles: Qz30-1- can cut steel sheet 3~10mm thicknessoptional Qz30-2- can cut steel sheet 10~20mm thicknessoptional Qz30-3- can cut steel sheet 20~30mm thicknessoptional Qz100-1- can cut steel sheet 20~40mm thicknessoptional Qz100-2- can cut steel sheet 40~60mm thicknessoptional Qz100-3- can cut steel sheet 60~100mm thicknessoptional Qz300-1- can cut steel sheet 100~150mm thickness Qz300-2- can cut steel sheet 150~200mm thickness Qz300-3- can cut steel sheet 200~250mm thickness Qz300-4- can cut steel sheet 250~300mm thickness. A set tip drills. Weight: 10 kg/package Dimensions:longth 610mm, width 380mm, high 350mm.
Packing list: A gasoline duplicating cutting torch·+ An explosion suppression gasoline tank(no duplicating machine, the userf+s original acetylene duplicating machine can still be used); 10 meters oil-resistant rubber hose·+longer hose optional·¼; 4 cutting nozzles: QZ30-1#- can cut steel sheet 3~10mm thickness·+optional·¼ QZ30-2#- can cut steel sheet 10~20mm thickness·+optional·¼ QZ30-3#- can cut steel sheet 20~30mm thickness·+optional·¼ QZ100-1#- can cut steel sheet 20~40mm thickness·+optional·¼ QZ100-2#- can cut steel sheet 40~60mm thickness·+optional·¼ QZ100-3#- can cut steel sheet 60~100mm thickness·+optional·¼ QZ300-1#- can cut steel sheet 100~150mm thickness QZ300-2#- can cut steel sheet 150~200mm thickness QZ300-3#- can cut steel sheet 200~250mm thickness QZ300-4#- can cut steel sheet 250~300mm thickness A set tip drills; A set o-ring·+spare parts·¼; Instruction; A set certification. Mark: CNC flame cutting machine combustion system reform Existing acetylene or propane CNC cutting machine can be to carry out technological transformation; combustion material feeding system will be changed to gasoline supply system, become gasoline CNC Cutting Machine. Performance Overview Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting: =+ Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using. =ª Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside. =ª Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures. =+ It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting. =+ As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.). =- The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness. =- The combustion tube is not backfire. =ª Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished. =- Itf+s normal working temperature range is -40 f¦ to 50 f¦. =+ A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate. Weight: 10kg/package Dimensions: length 610mm, width 380mm, high 350mm.
Packing list: A gasoline semi automatic cutting torch· An 10liters explosion suppression gasoline tank(No semi automatic car and track, the userf+s original acetylene semi-automatic roadster can still be used); 10 meters oil-resistant rubber hose·+longer hose 4 cutting nozzles: * can cut steel sheet 3~10mm thickness· * can cut steel sheet 10~20mm thickness· * can cut steel sheet 20~30mm thickness· * can cut steel sheet 20~40mm thickness· * can cut steel sheet 40~60mm thickness· * can cut steel sheet 60~100mm thickness· * 0-1#- can cut steel sheet 100~150mm thickness * 0can cut steel sheet 150~200mm thickness * 0can cut steel sheet 200~250mm thickness * 0-4#- can cut steel sheet 250~300mm thickness A set tip drills; A set o-ring·+spare parts· Instruction; A set certification. Performance Overview Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting: * Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using. * Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside. * Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures. * It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting. * As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.). * The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness. * The combustion tube is not backfire. * Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished. * Itf+s normal working temperature range is -40 f¦ to 50 f¦. * A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate. Metal welding & cutting revolution Dear customer: If you are using the expensive acetylene gas to cut or weld the metal, here I recommend my company's energy-saving products to you. Patent (Patent No.: 992098149) Through the National Machinery
Application Hongcong gasoline welding-cutting machine features an energy-saving rating over 80%, namely, 3 liter gas consumed in the machine equals to that of 1 bottle£¨40liter£©of acetylene, while the operation is the same to the acetylene torch with a higher performance, the fire may reach 2800-3000¡æ (adjustable) via mixture of aero explosion-proof material, atomized quadratic nanometer gasoline molecule and oxygen molecule, and available to cut steel, cast iron, stainless steel, cast aluminum, wrought aluminum and copper material. Hongcong gas welding-cutting machine also characterizes an easy operation, high speed, smooth welding, tiny cutting seam, flat slot, no slag, no flashback with an extensive cutting thickness between 0.5-400mm to eliminate the danger in operation, high cost, low efficiency, heavy waste and severe pollution of the acetylene torch. Hongcong gasoline welding-cutting machine has been ever more extensively used in iron & steel, shipbuilding, railway, petroleum, metallurgy, mining, machinery and other manufacturing industries to rate a longevity up to 15 years, it also features easy operation, explosive-proof installation, fine cutting, speed welding and cutting, convenient and extensively-adopted. Packing list HCQZ30 type Handgrip gasoline cutting torch¡¡¡¡¡1pcs HCQZ30 type cutting nozzle 1#~3#..................................... 3pcs 3 cutting nozzles: 1#- can cut steel sheet 3~10mm thickness 2#- can cut steel sheet 10~20mm thickness 3#- can cut steel sheet 20~40mm thickness HC20-1 type handgrip welding torch¡¡¡¡¡¡¡¡¡1pcs HC20 welding nozzle(1#~3#)¡¡¡¡.¡¡¡¡¡¡¡..1set 11Liter gasoline tank explosion-proof¡¡¡¡¡¡¡¡..1pcs 10m oil-resistant and fire proof rubber hose (optional longer add $2.00 per meter) A tool box with relational tools and spare parts Instruction and certification and Warranty sheet Optional configuration 1- HCQZ100 type Handgrip gasoline cutting torch 1pcs with 3 cutting nozzles (cut range 30~100mm) 2- HCQZ300 type Handgrip gasoline cutting torch 1pcs with 4 cutting nozzles (cut range 100~300mm) 3- HC-50 type semi-automatic cutting torch 1pcs without nozzle (Which can be refitted to the acetylene semi-automatic cutting machine of Chinese standard instead the acetylene cutting torch.) 4- HC-80 type profile cutting torch 1pcs without nozzle (Which can be refitted to the acetylene CNC cutting machine of Chinese standard instead the acetylene cutting torch.) 5- HC-60 type Handgrip gasoline heating torch 1pcs with 2 cutting nozzles (hard flame and soft flame) 6- Nozzle
Soft soldering tin lead solder wire sn63pb37, with rosin cored flux 1.5--2.2%, diameter 0.35--6.0mm available, packed in spool 1kg, 500g, 1lb..... Or tube 20g, 15g....
Tin lead solder wire sn60pb40 With rosin cored flux 1.8-2.2% Diameter 0.35-6.0mm available Packed in spool 1kg, 500g, 1lb, 250g, 200g.... Or tube 20g, 10g... Melting temperature 183-190â?? Density 8.5 Use pure materials, not recycle, good quality
Tin lead solder wire with rosin cored flux 1.8-2.2% Diameter 0.35-6.0 mm Packed in spool 1kg, 500g, 1lb, 250g, 200g... Or tube 20g, 10g... Melting temperature 183-215 Use pure materials, not recycle, good quality for soldering results.
Wedge Wire Screen For Solid Liquid Separators Filter Description: Wedge Wire Screen For Solid Liquid Separators Filter is a kind of strainers that flow from inside to outside filtration,with smooth working surface inside. This type wedge wire screen is manufactured by wrapping and welding stainless steel V-shaped profile wire cylindrically around support rods under automatic specialized wedge wire screen machine, then be made to screen pipe through cutting, reverse rolled, welded processing. Wedge Wire Screen For Solid Liquid Separators Filter Application: For special areas of application (among others, the starch industry) screen cylinders can of course also be manufactured in looped finish. Adjoining is an example of two end flanges. In this case, as well, almost all requirements by our customers can be realized after corresponding technical clarification.
Specification Material: steel frame and polyurethane surface. Thickness: 30mm, 45mm, 50mm. Opening size: Width: 0.1mm - 2.5mm , Length: 4mm - 16mm. Screen width: 305mm, 500mm and 515mm, others can be designed. Screen length: 305mm, 610mm, 650mm, 915mm, 1200mm and 1220mm, others can be designed. Connection type: Bolts, Rose nail, Trim strip , Rail support. Description Polyurethane dewatering screen panel is a type of screens made of steel frame and polyurethane surface. This structure ensure the high tensile strength and much better wear resistance than the woven vibrating screen mesh and perforated vibrating screen nesh.Polyurethane dewatering screen panel is mainly used for dewatering of sand and gravel.Polyurethane dewatering screen panel is also called polyurethane slot screen because of the narrow slot openings. The narrow slot opening is as fine as 0.1mm, which makes the screen have high efficiency and accurate dewatering performance. The polyurethane dewatering screen panel is widely used to assist in dewatering of materials. Additional, it can also provide a ramp which helps to maximize screen washing capabilities. Features Wear and abrasion resistance. High efficiency. High tensile strength. Steel frame added to strengthen the tensile strength. Lightweight and easy to install. Various connection types to fit different machines. Non-blinding. Low noise. Long service life. Application: Polyurethane dewatering screen panel can provide a ramp which helps to maximize screen washing capabilities and mainly used for dewatering and dehydration for various materials. Such as below: Tailing. Coal. Gravel. Sand.
Material: low carbon steel Coating: zinc-coating or pvc-coated. Gabions are wire mesh boxes, containers or baskets filled with rock to prevent soil erosion and to retain/contain soil particles. They reduce water velocities and re-capture river bed sediment in streams. Flat Gabions, called River or Reno Mattresses are widely used in river courses where soil erosion is a problem over a wide flat area and a large area needs to be protected against soil loss/scour. They are used mostly in the civil engineering industry especially in the construction of roads.
Fiberglass mesh. 1m x 50m rolls, 5*5mm mesh, 125gr/m2, color orange Product detailed description: Material: yarn, fiberglass wire Mesh size: 3 mm x 3 mm, 4 mm x 4 mm, 5 mm x 5 mm, 8 mm x 8 mm, 10 mm x 10 mm Weight/square meter: 45g ~195g and 300g. Width: 1 m-2 m. Mostly 1m width. Up to requirement, can be cut to small rolls. Length: 50m , 100m, 300m , 400m, 500m, ect, up to requirement. Application: For building internal and external wall insulation, waterproofing, anti -crack, etc. Colors: White (standard) or other blue green color. Or as your request. Coating glue: our coating glue is produced by germany basf which can keep more than 70% after 28 days naoh test. Usage: It is widely used in reinforcing light wallboard, internal and external wall, building component, and plaster products; besides, they can also be sticked on the back of mosaic, marble and other stone materials of superior-quality. They are the most ideal building materials for reinforcement and are widely used during the innovation process of building materials for external wall. Characteristics: - coated with acrylic-acid copolymer liquid, these products have a flat and clean surface, rich sense of touching and excellent position-fixation - these products are acid-resistant, alkali-resistant and anti-aging. Softness and color can be made according to customers requirement. - the quality of products is stable through the seasons. The products are shrink-wrapped, and their color and quality will not change after the products being stored for 6 months. 1.The plastic bag with straight tube 2.Shrink-wrap film 3.Carton(usually 4pcs/carton, 12pcs/carton, 48pcs/carton) 4.Wooden pallet(usually 36pcs/pallet, 72pcs/ pallet)
The stainless steel mesh tubes are made of various good quality raw materials including stainless steel wire, stainless steel woven wire cloth and carbon steel wire mesh, etc. In order to meet the customers' growing demand, single layer and multilayer filters are available in every diameter and size. To enhance the filtration efficiency, multilayer filters may be consist of several different kinds of mesh. Stainless steel mesh tubes are made from several layers of woven or perforated stainless steel wire mesh overlapped together and then sintered in a vacuum sintering furnace. We can roll the sintered tube filter into a tube shape, and then weld the seam-formed sintered tube filter together. Due to the use of stainless steel material, the sintered metal mesh tube filter has excellent corrosion and high temperature resistance. It is a common industrial filter tube for liquid and gas filtration and is used in petroleum, polyester, pharmaceutical, chemical fiber, food and beverage, water treatment and other industries. With accurate filtration precision, cylindrical filters are generally used to separate undesired rubble and can filter various fluids. With high mechanical strength, it is mainly used in petroleum, chemical industry, pharmacy, foodstuff and sewage water treatment, etc.
Our products have passed through FCC, CE certification, support ODM & OEM, all in the excellent quality with competitive price. Product Description: - Made of aluminum metal, the shell of the machine is of great durability. - Support PD2.0/3.0, QC2.0/3.0, DC12V-25V, 3S-6S battery, AC100-240V power supply. - 1.14 inch LCD color screen display, brightness, and color can be adjusted. - Suitable for T12 soldering iron tip, support ºC/ºF switching, the maximum temp is 450ºC/842ºF. - Built-in buzzer to remind, automatically heat up when power on. - Intelligent temp control algorithm, supports temp compensation and temp self-calibration. - The sensitivity can be set to reject the interference of environmental factors. - Low-pressure protection, high temp and high-pressure alarm, safe and reliable. - Support LOGO customization(Notice:new version removes Custom LOGO function, currently on sale do not have Custom LOGO function.), and firmware upgrade.
