Tube Expander 1.DN100-1200mm 2.Tube expandercan expand the pipe of 6mm thickness. 3.The step height of the tube expander is designed by special requirement. ·4.It's installed with Siemens system to control the expanding stroke of the steps.
Android System RK3288 , RAM:4G DDR3 ,ROM:16G IR 10 POINTS TOUCH Interfaces: HDMI *1 VGA*1 USB *2 MIC *1 SD*1 LAN*1 Android 5.0
Multi-Function Myopia Prevention and Control, Eye Axle Light Meter for Strabismus Amblyopia Adjustment Training Four Functions: 1.Supplementary Light Meter, 650NM red light precisely enhances eye muscle activity, promotes secretion, and thickens the choroid 2.Bates Training 3. Binocular Fusion 4. Light Sensing Training
Dewaxing Autoclave Dewaxing autoclave uses the high temperature and high pressure steam to remove wax from ceramic shell mold. FUGE dewaxing autoclave adopts the Siemens control system to automate the dewaxing process. In the whole process of lost wax, our dewaxing autoclave needs no labor to operate the machine. We also installed double safety protection devices on our dewaxing autoclave. Dewaxing autoclave key features Efficiency: Designed as an integration of the steam boiler and dewaxing chamber to save space and promote efficiency. Easy operation Easy to operate in automatic and manual mode. Fast: Double layers pressure vessel takes short time for pressure balance, and the time can be adjusted on certain conditions. Stability: Siemens PLC programmable controller with strong anti-interference ability and stable performance. Traceability: Paperless recorder to monitor the whole working status, and allow user downloads the technical process data for analysis. Green Optional Heat Recovery Unit to save cost. Parameter list 1 MODEL FG-TLF1000 FG-TLF1200 FG-TLF1400 2 Design pressure 1.0MPa 1.0MPa 1.0MPa 3 Design temperature 183.2 183.2 183.2 4 Working pressure 0.9 MPa 0.9 MPa 0.9 MPa 5 Working temperature 179 179 179 6 Pressure Balance Time 5s(at the pressure of 0.6 Mpa) 5s(at the pressure of 0.6 Mpa) 5s(at the pressure of 0.6 Mpa) 7 Inner Dimension 1000 1200 1200 1500 1400 1600 8 Dewaxing Time 0 60min (Adjustable 0 60min (Adjustable 0 60min (Adjustable 9 Heat Recovery Unit Optional Optional Optional 10 Overall Size 3600(L) 2200(W) 2400mm(H) 3930(L) 2300(W) 2910mm(H) 4350(L)*2460(W)*3100mm(H)
Cup Grain Moisture Meter LDS-1G The Cup Grain Moisture Meter LDS-1G is used for fast and accurate measurement of moisture content in grains,including wheat,rice,soy bean,rapeseed and other grains and seeds. Features: * Able to measure grains up to 20 species. * The cup type measurement causes small error. * Wide measuring range. * Temperature and volume of grains can Display Specifications: Measuring object: nonmetallic granulated materials such as cereal, wheat, rapeseed, soybean, vegetable seeds, corn, feed and so on Measuring error: 0.5 %( main moisture range) Repeat error: 0.2% Measuring range: 3-35% Working environment: 0-40 C Temperature compensation: automatic Attached function: volume-weight conversion display, sample weight display, temperature display, average moisture content calculation Calibration: 4 points calibration, unlimited sample (20 common varieties have been calibrated in advance, can be tested directly) Power supply: AC/DC, 4x1.5 AA size battery/special external power adapter Weight: 3.8KG Dimensions: 36*43*24CM grain moisture meter Name No Name No Terrier Valley P1 Peanuts P11 Soybean P2 Chinese sorghum P12 Wheat P3 Black sesame seeds P13 Rapeseed P4 Sunflower seeds P14 Corn P5 Watermelon seeds P15 Barley P6 Cottonseed P16 Indica Valley P7 Soybean meal P17 Rice P8 Cottonseed meal P18 Large grain corn P9 Rapeseed P19 White wheat P10 Feed pellets P20
DM200C Concrete Moisture Meter DM200 Concrete moisture meter is a high-performance and digital moisture testing equipment by our company based on international advanced technology.The instrument adopts high frequency principle, digital display, sensors and main body together as one, equipped with ten gears are used to measure concrete,glass,cement and brick. Features: * Its integrative design convenient to carry outside for testing. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * It is small in size, light in weight ,easy to carry out for fieldwork if needed. * Manual off at any time. Specification Display:4 digital LCD Measuring range : 0.00-2.00% (d) 0.0-50.0% (s) Measuring condition Temperature:0-60 C Humidity:5%-90%RH Resolusion:0.1 or 0.01 Accuracy: ± 0.5(main moisture range) Power supply: 9V battery (6F22) Dimensions: 160mm 60mm 25mm Weight:203g (not including batteries)
DM200T Textile Moisture Meter DM200T Textile moisture meter is a high-performance and digital moisture testing equipment by our company based on introduction of foreign advanced technology. The instrument adopts high frequency principle, digital display, sensors and main body together as one, equipped with ten gears are used to measure different kinds of Cotton Clothes, Yarn, wool and other textile materials. Features: * Its integrative design convenient to carry outside for testing. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * It is small in size, light in weight ,easy to carry out for fieldwork if needed. * Manual off at any time. Specifications: Display:4 digital LCD Measuring range : 0.00%-2% 0.0%-90% Measuring condition Temperature:0-60 C Humidity:5%-90%RH Resolusion:0.1 or 0.01 Accuracy: ± 0.5(main moisture range) Power supply: 9V battery (6F22) Dimensions: 160mm 60mm 25mm Weight:203g (not including batteries)
Dew Point Meter HD600 Widely used in workshops, offices, factories, libraries, computer stations, laboratories and warehouses. Applicable to pharmaceutical, packaging, textile, cigarette, electronic manufacturing and other industries. Features Adopt digital signal sensing technology, good measurement repeatability, fast response and high sensitivity . Digital display with back light gives exact and clearly reading although you stay at the somber conditions. Able to measure Humidity, Temperature, Wet Bulb Temperature, Optional USB or Blue Teeth Data hold function. Low battery alert. SPECIFICATION Display:10mm Dispaly Parameters Measured: Humidity and Temp, Wet Bulb Temp, Dew Point Temperature Dew Point Temp. range: -40 C~40 C (-40 F~104 F) Dew Point Temp. resolution: 0.1 C Dew Point Temp. accuracy: ±1 C R.H range: 5-98% R.H resolution: 0.1RH% R.H accuracy: 2.5RH% Temp range: -20 ~60 (-4~140 ) Temp resolution: 0.1 /0.1 Temp accuracy: 0.5 Wet Bulb Temp range:-20 ~60 (-4~140 ) Wet Bulb Temp resolution: 0.1 /0.1 Wet Bulb Temp accuracy: 0.5 Sampling Time: less than 0.5s Power supply: 4x1.5 AAA size (UM-4) battery Dimensions: 185mm 70mm 30mm Weight: 125g (not including batteries)
ZHENYOU Engine oil detector Model: THY-T1616 Product description ZHENYOU engine oil detector can determine whether the oil is qualified or not, by detecting the comprehensive pollution degree of the lubricating oil. The product fundamentally solves two difficult problems: 1.Should the oil be changed? 2.When should the oil be changed? Scientifically advice customers to "change oil by quality" instead of the traditional "change the oil on schedule". Functions & Advantages Quickly determine the oil using status in 1 minutes. Small size, easy operate and on-site used. Accurately test, conducive for scientific management. Visually show the deterioration process of engine oil. Technical Parameters Battery 1200mAh Working Temperature-15~+55 Power consumption
ZJB-101 online monitoring system consists with battery cell acquisition module and monitoring host device. It provide real-time string voltage, charge / discharge status detect, export current, cell current & voltage, internal resistance etc. It also provide automatic balance function of battery cell, to keep the voltage at a reasonable float charging range, prolong the service life of the battery. Comm port allow build remote monitor system, provide reliable and effective management method for the battery bank management, reduce risk of power interruption caused by power failure.
ZJB-DT is highly intelligent battery charge and discharge tester. It can be used as the discharge load in the battery off-line state, and realize the constant discharge of the set value by continuously regulating the discharge current. the tester records all valuable and continuous real-time data during the process. Friendly HMI provide a variety of configuration and data review, user can download record data to USB. PC host operation software can generate the curves and reports needed. Intelligent SCM ARM control, 7-inch 1024*600 LCD display. �· Discharge load use PTC ceramic resistor, avoid red heat for a safer discharge process. �· Remote battery data collector use wireless, multiple band design for 4 device working in one site. �· Each device support max 25 cell collection boxes, each box connect 12 batteries, total 300 battery cell detecting. User free to configuration charge/discharge termination threshold. Provide software export record & curve report for further analysis. Various alarm function, provide automatic protection in over-temperature/voltage/current status. With RS485 port for remote control
DCG series DC insulation monitor is based onRS485 Modbus protocol, suitable for EV DCcharging system, photovoltaic system, energystorage system, DC power grid and other DCsystems under 1000V. This device has the function of insulationmonitoring start and stop, insulationmonitoring can be real-time monitoring ofpositive and negative poles to the groundinsulation resistance, the monitoring result isnota affected by DC voltage changing, is notaffected by the positive and negative polesinsulation resistance symmetry. Model DCG-UBC1 DCG-UBCH2 Detect channels Single channel Dual channels DC voltage range 0~1000V Power supply 9~30VDC Insulation resistance range 1K ~10M Insulation monitoring accuracy 3K +10%(100-300V) 3K +5% (300-1000V) Measurement accuracy 2V+0.3% Storage temperature -40 C ~ 125 C Operating temperature & humidity -40 C ~ 70 C, 85% Off-line pressure test
ZJS-102 Insulation monitoring system is a highaccurate and secure online monitoringequipment for DC system insulation. It isdesigned for the measurement of differenttypes of ground fault, insulation decreasing,AC signal interruption, DC signal interruptionand so on. Monitor detect DC leakage current, mixed withbalanced & unbalanced bridge detectionmode, can display leakage current of each subexport loops. It integrates voltage transientcapture and current synchronous detection,records voltage and current fault curves toachieve instantaneous grounding monitoringand line selection alarm functions.
High humidity environment is a big impact factor of power transmission and transformation equipment, it will bring discharge, flashover will eventually cause the switch to trip, even burning down equipment caused a large-scale blackout. Switchgear, electrical cabinet, exchange control cabinets, outdoor terminal boxes, Due to the compact internal equipment installation, wet and condensation will be more serious consequences. At present, most user choose heating, ventilation and other method to prevent condensation. but in some well sealed cabinet and high temperature environment, traditional heating and exhaust air method is hard to work well. Blue Jay company developed DH series using semiconductor technology, in a certain place to lead controlled condensation, make the cabinet interior humidity fall to safe value. It designed ultra-small install size, high efficiency energy-saving, do not need extra heater and fan wiring. And comes with the data acquisition module for remote monitoring, It's an efficient and reliable device to replace the old thermostat and heater / fan combination.
HVD high voltage indicator is adapted for indoor electrical panel, used in MV / HV switchgear. It is connected via internal wiring to capacitive sensors inside the switchgear. Rated voltage 3~40.5kv, operation frequency 50Hz network to display the electrifying situation of the high voltage loop where the device is mounted. This integrated voltage detecting system is used for continuous operation. The condition "voltage present" is displayed by three LED indicator.
STM wireless temperature monitor can help medium-low voltage switchgear operators and maintenance engineers, to reduce safety risks from sudden temperature increases in switchgear components. It provide 7*24 hours switchgear monitor for critical busbar joints. Multiple styles of remote sensors node can deal with different electrical contacts, W3000 support max 32 monitoring node for single switchgear. Panel mount HMI unit have acousto-optic alarm and DO port, user can free to build various automatic alarm / control system. Equipped RM485 port can connect existing SCADA system for remote sensering control. It can protects your electrical assets from costly outages; while increasing safety via remotely monitoring equipment. This also increases asset integrity, and minimizes downtime.
PR200 motor protection relay is an all-in-one solution designed to continuously monitor 3-phase power lines for abnormal conditions. It can use with motors less than 690V/820A. Packed inside a small and economic package you will find a solution designed to save you time and money.
PR 240 is an excellent choice for telemetry applications for Motor monitoring, metering, and control. Its small size, low cost and remote HMI options make the relay a perfect option for power distribution systems for such uses as end-of-line monitoring and power metering. It offers low-voltage motor protection in virtually all applications, including pumping, air-based, chiller, and bulk-material applications. It can be configured as full range of medium-voltage, three-phase induction and synchronous motors protect relay.
PR 260 is modular design motor managerment device, accommodate more I/O modules. Flexible arrangement of motor control modes and state sensing. monitors voltage, current, and temperature to provide a comprehensive package of 22 protective functions. with integrated protection, motor control, metering, and data-logging functions. This system is typically used to provide protection for three-phase low- and mediumvoltage, mediumto high-horsepower induction motors.
PDG-1000 provide continuously monitors of partial discharge (PD) in equipment such as transformers, cables in switchgear and rotating machines etc. It analyzes RF emissions in the HF, VHF and lower UHF ranges by sensors outside the cabinet. HMI unit provides site display of TEV amplitude, ultrasonic amplitude, DO port can drive local alarms, Multi-level alarm notice site engineer. PDG-1000 also can communicate data and notifications across standard RS485 modbus interface to networked supervisory systems. Rugged, compact design sensor detect TEV and audible ultrasonic. Non-intrusive and wall-mounted unit design, magnetic adsorption easy installation. Panel mount HMI unit provide automatic PD data acquisition and analysis. HMI support max 96pcs sensor, optional wireless and wired(RS485) connection. Multiple configurable alarms, provide 2*DO NC & NO contact for external alarm trig. RS 485 MODBUS-RTU easy integration into existing SCADA systems.
