High Hardness Grinding Ball, Forged Steel Foundry Tungsten Carbide Ball Grinding Diameter: 100mm-150mm Hardness: HRC55-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special steel materials to produce the SAG balls to ensure the good performance of high hardness, high impact and wear resistance applicable in SAG mills.
HM3 Forged Alloy Steel Balls(90-150mm) Hardness: HRC55-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special steel materials to produce the SAG and Ball mill balls to ensure the good performance of high hardness, high impact and wear resistance applicable in SAG mills and ball mill. For any interest or new enquiry, please don't hesitate to contact us.
Our factory manufacture and export Forged Steel Grinding Ball for ball mill as follows: 1.Feature: The forged steel grinding ball is excellent in surface quality, toughness, and resistance to impact and abrasion. It won't crack and lose circularity easily. 1) In general, forged grinding steel ball has high hardness: Surface hardness to 55-67 HRC, volume hardness of 56-64 HRC 2) impact toughness high: Impact toughness more than 12 J per CM2 3) broken rate is low: Peel fragmentation resistance property of over 20000 times. The actual breakage rate not greater than 1% and close to 0. 2. Specifications: 1) Diameters: Dia. 20 - 150mm 2) Hardness: HRC 55-65 3
Diameter: 20mm, 25mm, 30mm, 40mm 50mm 60mm 70mm 80mm Hardness: HRC60-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special high carbon steel materials to produce the mill balls to ensure the good performance of high hardness and wear resistance applicable in ball mills. For any interest or new enquiry, please don't hesitate to contact us.
Forged grinding steel balls: Diameter: 100mm Hardness: HRC58-65 Application: Various ball mills for metal mines The rolling forged steel balls are produced by alloy steel materials through automatic production lines. We have one complete strict quality control systems from the materials, production process and finished products to ensure the steady quality of the grinding balls.
High manganese Forged Grinding Media Diameter: 20mm-150mm Hardness: HRC55-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special steel materials to produce the mill balls to ensure the good performance of high hardness, high impact and wear resistance applicable in SAG mills and ball mills. For any interest or new enquiry, please don't hesitate to contact us. Thanks for your reading.
Forged grinding steel balls used in ball mill for mining industries: Diameter: 20mm, 25mm, 30mm, 40mm 50mm 60mm 70mm 80mm 90mm Hardness: HRC60-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special high carbon steel materials to produce the mill balls to ensure the good performance of high hardness and wear resistance applicable in ball mills. For any interest or new enquiry, please don't hesitate to contact us.
Forged Steel cylpebs for Ball Mill Sizes::20mm*30mm--50mm*60mm Chemicals:medium ,high carbon alloy steel material Hardness:HRC50-65 It is widely used in various mines, cement plants, power plants and other industries.
30-100mm Steel Grinding Balls for Ball Mill Type Forged or rolled steel grinding balls with proper heat treatment Application fields:gold mines,iron ore,copper ore ,etc for mineral grinding Hardness: HRC60-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special high carbon steel materials to produce the mill balls to ensure the good performance of high hardness and wear resistance applicable in ball mills. For any interest or new enquiry, please don't hesitate to contact us.
20mm 25mm Forged Steel Balls for Ball Mill Forged grinding steel balls used in ball mill for mining industries: Diameter: 20mm, 25mm, 30mm, 40mm Hardness: HRC60-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special high carbon steel materials to produce the mill balls to ensure the good performance of high hardness and wear resistance applicable in ball mills.
125mm Forged Grinding Media Balls(HM4) for SAG Mill Hardness: HRC55-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special steel materials to produce the SAG balls to ensure the good performance of high hardness, high impact and wear resistance applicable in SAG mills. For any interest or new enquiry, please don't hesitate to contact us.
High,medium,low casting grinding media ball,grinding steel balls for cement Diameter: 17mm-120mm Hardness: HRC50-65(Surface and Volumetric) Cr:1-20% and customized Characteristics: High hardness, good wear resistance, no breakage.
Forged SAG Balls for mining industries: Diameter: 120mm-150mm Hardness: HRC55-65(Surface and Volumetric) Characteristics: High hardness, good wear resistance, no breakage. We use the special steel materials to produce the SAG balls to ensure the good performance of high hardness, high impact and wear resistance applicable in SAG mills. For any interest or new enquiry, please don't hesitate to contact us.
Are you looking for the new manufacturer of grinding balls? Which one will you choose? Please take some time to get to know our products and our company. If you choose us, I think you will not be disappointed. Our factory manufacture and export Forged Steel Grinding Ball for ball mill as follows: 1.Feature: The forged steel grinding ball is excellent in surface quality, toughness, and resistance to impact and abrasion. It won't crack and lose circularity easily. 1) In general, forged grinding steel ball has high hardness: Surface hardness to 55-67 HRC, volume hardness of 56-64 HRC 2) impact toughness high: Impact toughness more than 12 J / cm2. 3) broken rate is low: Peel fragmentation resistance property of over 20000 times. The actual breakage rate not greater than 1% and close to 0. 2. Specifications: 1) Diameters: Dia. 20 - 150mm 2) Hardness: HRC 55-65 3) Chemical elements(%): 3.Picture show 4. Packing Instruction: Barrel with wooden pallet: Steel Drum or Steel Barrel Barrel size(cm): 89 58 (Volume: 800kgs N. G. Avaliable) Pallet size(cm): 168 X 59 X 13 Two Barrel tie on the wooden pallet, steel tape for bundle Strong Nylon Bag: Avalible Bag: 50kgs; 100kgs; 1000kgs
Shandong Huamin Steel Ball Joint-stock Co.,Ltd(Shandong Huamin Casting and Forging Joint-stock Co.,Ltd) is one of the largest manufacturers and exporters for grinding steel ball and rod mill in China, the annual production output is 200,000 metric tons. Our products are mainly exported to USA, Canada, Chile, South Africa, Italy, Greece, Korea and Japan more than 30 countries and regions in the world. Product Description Our cast iron grinding balls can be divided into three categories including the high chromium type, medium chromium type and the low chromium type. The Quality Index of the High Chromium Type The chromium content of the high chromium type product is greater than or equal to 10.0%. And the carbon content is between 1.8% and 3.20%. It is required by the national standard that the hardness of the high chromium type product must be no less than 58HRC, and that the impact value should be greater than or equal to 3.0 J/cm2. This type of product must go through the hot quenching and the tempering treatment to come up to the hardness. Currently, in China, there are two quenching methods for this type of product including oil quenching and wind quenching. If the tested hardness of this type of product is below 54HRC, then it shows that the quenching treatment is omitted. Testing Our lab is equipped with an advanced testing machine to strictly control the quality of the product. Packaging Barrel with wooden pallet: Steel Drum or Steel Barrel Barrel size(cm): 89 - 58 (Volume: 800kgs N. G. Available) Pallet size(cm): 168 - 59 13 Two Barrel tie on the wooden pallet, steel tape for bundle Strong Nylon Bag: Avalible Bag: 50kgs; 100kgs; 1000kgs Certifications Our company has obtained ISO 9001 International Quality System Authentication, ISO14001 Environmental System Management Authentication and ISO18001 occupational health and safety certification, safety standardization identification, clean production enterprise certification. We welcome customers both at home and abroad to come to negotiate business with us, we sincerely promise you. We are trying our best to supply you with high quality products, reasonable price, timely delivery with satisfactory service as the basis of our long-term cooperation. Insisting on the theory of "Credit Goal, Quality Life, Market First, Customer God", our company is establishing the largest professional producing and exporting base in China, which include grinding steel balls and rod mill products. "Winning on quality, making up to the world" is our eternal promise
Price Negotiated According to Different Model
Shot Peening : Steel shots are used in shot peening, which is used to make stronger and reduce stress in machinery like turbines, steel automobile crankshafts, springs, gears, torsion bars, shafts and connecting rods. Surface Preparation: Steel shots are used in support of coatings, such as powder coating, enameling, painting, metallization, rubber bonding and moreâ?¦ Sand Removal: Steel shots can be used in cleaning of castings. Scale Removal: Steel shots can also be used to clean ferrous or non-ferrous alloys or products (pipes, plates etc.) that are made from forging, die-forging, stamping, drawing and rolling or after heat treatment. Shot Blasting of Cast Steel: Steel shots can be used on the blasting of profile steel,shipboard,steel board and other steel material Roughening and de-burring: Steel shots are used in the aesthetic treatment of some material. It is also used to remove the burrs that might arise during injection moulding of metallic products.
AISI 1010/1015 CARBON STEEL CEMENTED BALLS Material: Carbon Steel Size: 0.5mm-50.8mm Grade: G100-G1000 Hardness: HRC â?¥ 60 Certificate: ISO9001, TS16949, ISO14001 Feature: High hardness, and excellent wear resistance Application: Anti-friction bearings, steering columns, casters, conveyors and trolleys, roller skates, toys, drawer slides Low cost carbon steel balls, they are hardened only on the surface (case-hardening heat treatment). The thickness of the case hardened layer is about 0, 8 mm. Applications Furniture rails and rollers, drawers and rolling bearings, locks, oilers and greasers, skates, caddies, toys, belt and roller conveyors, tumble finishing
Miniature stainless steel ball 2.0mm (SUS440C) is a kind of steel ball wildly used in bearings. Size range 2.0mm--25.4mm, Grade G10--G500, Certificate ISO9001-2008, TS-16949, ISO14001. It contain anti-rust function with higher precision which could be applied into precision bearings. 1. Material: AISI 440/440C; SUS440/440C. AISI52100 2. Size: 2.0mm-.50.8mm. 3. Grade: G10, G25, G100, G500. 4. Hardness: HRC58-65. 5. Grade Standard Comply with AFMBA. 10 or DIN 5401. 6. Certificate: ISO-9001, ISO-14001, TS-16949. 7. Application: It's suitable for special environment and machine as like hydraulic parts, grinding machine and so on, it has better rust resistence and hardness than AISI420. Sizes are available in millimeters, inches and fractions. AISI 440C balls are a martenistic-type stainless steel, which is used extensively in bearing applications that require corrosion-resisting properties. 440C balls are resistant to corrosion from fresh water, steam, crude oil, gasoline, perspiration, alcohol, blood and foodstuffs. Maximum resistance to corrosion and tarnishing is only achieved when 440C is fully hardened and surfaces are polished to a high luster. HRT provides 440C balls in vacuum melt condition upon request.
0.5mm 440C Stainless Steel Ball AISI 440C balls are a martenistic-type stainless steel, which is used extensively in bearing applications that require corrosion-resisting properties. 440C balls are resistant to corrosion from fresh water, steam, crude oil, gasoline, perspiration, alcohol, blood and foodstuffs. Maximum resistance to corrosion and tarnishing is only achieved when 440C is fully hardened and surfaces are polished to a high luster. HRT provides 440C balls in vacuum melt condition upon request. Features: 1. Made of material in AISI 440C 2. Size: 0.5. Mm~25.4mm 3. Grade: G10, G25, G100, G500. 4. Hardness: HRC58~65. 5. Grade Standard Comply with AFMBA. 10 or DIN 5401. 6. Certificate: ISO-9001, TS-16949 7. Application: It's suitable for special environment and machine as like hydraulic parts, grinding machine and so on, it has better rust resistence and hardness than AISI420. 0.5mm 440c Stainless Steel Ball
