Model: IRA-HP58/1.8-OEM12 Color: Custom made Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: P0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: µh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.0mm thickness of galvanized steel material Structure of tank: 4 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 1.124m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 12 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 150L Other Tank capacity: 80/100/120/150/180/200/240/300/360L Heat pipe pressurized solar water heater features: 1.Adopts the best conduction performance metal- heat pipe (copper). 2.Can be used all year round in the cold climate. 3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly. 4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa. 5.No water in the tube, one tube broken don't influence the system working. 6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage. 7.Dual-purpose brackets for both flat and inclined roof. 8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out. Pressurized solar water heater working principle: 1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure. 2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot. 3.No water in the heat pipe makes the whole system could bear pressure.
Model: IRA-HP58/1.8-20 Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: P0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: µh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.2mm thickness of galvanized steel material Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 1.874m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 20 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 200L Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-24 Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank:Food grade 1.2 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: Pâ?¤0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: εh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.5mm thickness of galvanized steel material,45degree. Structure of tank: 6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor. Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 2.249m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 24 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 240L Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Dear Managerï¼? This is MOTU Industry Co., Ltd from China. We specialized in gas water heater for 10 years, with customers of Walmart (Mexico) ect, and hope to find a way to cooperated with you. Our gas water heater have CE and Australian Standards AS2658 certification. Our new design Portable Gas Hot Water System is HOT SALE in Australia and New Zealands camping gear stores last yearï¼?This model have been hot sole in Target (USA ) too. As it is a promising product, we would like to introduce this opportunity to you. Samples available, can be sent on request.
Model: IRA-HP58/1.8-12 Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: Pâ?¤0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: εh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.2mm thickness of galvanized steel material Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 1.874m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 20 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 200L Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Description: Flat panel solar water heater(IRA-FP-1) Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.2 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m³ high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.6Mpa Flat panel solar collector Dimension: 2000x1000x80mm Absorber material: Selective balck chorme/Blue coating Head pipe: Copper/Φ22x0.6 Branch pipe: Copper/Φ10x0.5 Quantity of Branch pipe: 7PCS Welding: Laser welding Cover: Low iron tempered textured glass Frame: Anodised aluminium alloy Insulation material: Rock wall Bracket: 1.5mm thickness of galvanized steel material,25degree. Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 2m² Temperature tolerance: from -5C to 250C Tank capacity: 150L Quality features, certificates: High level of efficiency due to Sunselect coating on the absorber. Low energy loss thanks to excellent thermal insulation. Suitable for onâ??roof and flatâ??roof assembly Installation: vertical, side by side. Robust aluminium frame for maximum durability. Highly reliable with long useful life due to the use of high quality, corrosionâ??resistant materials. Glass covering made from low iron solar glass. Easy to erect and install.
Heat pipe pressurized solar water heater features 1.Adopts the best conduction performance metal- heat pipe (copper). 2.Can be used all year round in the cold climate. 3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly. 4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa. 5.No water in the tube, one tube broken don't influence the system working. 6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage. 7.Dual-purpose brackets for both flat and inclined roof. 8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out. Pressurized solar water heater working principle 1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure. 2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot. 3.No water in the heat pipe makes the whole system could bear pressure.
Our solar vacuum tubes has prosperity of high absorption and low emission. The vacuum tube consists of outer tube, inner tube, (al-n-ss-cu) coating and holder.Al-nn-ss-cu is coating for three target tube. Three target assimilate the advanced 12 layers of spattering deposition of trivalent element technology, high borosilicate glass, and gradual change of al-n-ss-cu selective complex absorptive coating. These make three target vacuum tube have high performance of absorption and low reflection ratio. Because of the coating, three target vacuum tube’s absorption rate increase 30%-50% than normal tube.
Inner tank: stainless steel SUS304/316L, thickness:1.0mm-1.2mm Outer tank: painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS201/stainless steel SUS 304 Vacuum tube: QB-AL-N/AL-47-1500/58-1800 Insulation: 50mm-60 polyurethane Frame: coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm/2.0mm aluminum alloy Accessories: intelligent controller, electric heater, magnesium bar, PT valve, negative valve etc. Characters: 1) Easy Maintenance No glycol, simple structure. No annual and periodical check-ups or maintenance is necessary. Blind sleeve design, no pollution, no-leaking heat pipe, easy installation. No water in vacuum tubes, one broken tube will not affect the function of the whole system. 2) High Performance With the cutting-edge vacuum-tube collecting technology, over 92% of sunshine energy is converted to thermal energy for heating and no circulation loss. Thicker insulation layer, functioning well in winter, even in minus-30-degree environment. 3) High Reliability System is simply working with the city net water, without pumps. Inner tank made by stainless steel SUS316-1.2mm. Working with high pressure, directly connected to running water, automatically functioning. With T/P valve and exhaust valve, it protects the tank from shrinking. 4)Year-round Operation With the freezing-proof technology, the system is designed and installed to operate for all seasons. Electric heater is optional to use, to ensure plenty hot water in rainy days. Principle: When vacuum tube absorb solar energy and heat the heat pipe ,the working fluid vaporizes and rise to the top of the heat pipe condenser, when heat pipe condenser meet cold water and cool down, the working fluid will fluidity and return to the bottom of the heat pipe, so once and once again to repeat this process.
A complete set of 10 tube solar water heaters 100L
Product Description 1.Application: Tubular PTC heater for towel drier, electric water heater, ventilator 2.Characteristics 1) self-regulation PTC elements. Heater will not be damaged or get fire even if under the condition without water flow. 2) Less power aging rate. Energy-saving, power will be adjusted automatically by water temperature. 3) Voltage can be designed as client request from 12-265VAC. 4) Housing material can be made as client request like aluminum, stainless steel, cooper, or titanium to suit for different application. 5) Diameter can be ranged from 5-25 mm. Length can be ranged from 10-1200mm. Special requirements can be customized.
Compact heat pipe solar water heater Tech data: 1. Inner water tank:stainless steel, sus304-2b, ss316l, enamel;thickness, 1.2-2.5mm. 2. Outer water tank:color steel or stainless steel;thickness, 0.40mm. 3. Insulation layer: polyurethane foam;thickness, 30-60mm. 4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement. 5. Vacuum tubes: aln/ain-ss/cu layer; 47-1500 or 58-1800 with heat pipe. 6. Heating element, mg rod, reflector and controller can be provided. 7. Working pressure :0.6mpa , testing pressure :1.0mpa. Characteristic: 1. Evacuated tube, aluminum fin and heat pipe arc closely integrated, realizing faster heat transfer and lower loss. 2. There is no water in tube, no filthy, anti-freeze, unlimited time of putting water and pressure operation, even there is tube broken, and the whole system still can work. 3. The system is same as tap water which would make the bathing very comfortable. 4. With the t/p valve, air vent valve makes the system work very stable and safety. 5. Can be used all year round in the cold climate
Separated pressure solar water heater This system is combined with solar collector, pressurized storage tank, work station, pipeline etc. 1. Solar collector can be the heat pipe solar collector, the u pipe solar collector, the balcony solar collector or the flat solar collector. 2. Inner tank for pressurized storage tank can be sus304-2b, ss316l or enamel tank. 3. Solar working station. 4. Working pressure :0.6mpa , testing pressure :1.0mpa Characteristic: 1. No disorder water tank on your roof: split solar water heating systems is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly. 2. Perfect solar collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc. 3. There is an auxiliary heating device--electric heater booster in the tank, so providing hot water in case of cloudy or rainy days, you will no need to worry about it. 4. Completely automatic
Compact non-pressure solar water heater Tech data: 1. Inner water tank:stainless steel, sus304-2b, ss316l; thickness, 0.31-0.51mm. 2. Outer water tank:color steel or stainless steel;thickness, 0.40mm. 3. Insulation layer:polyurethane foam;thickness, 30-60mm. 4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement. 5. Vacuum tubes:aln/ain-ss/cu layer;47-1500 or 58-1800. 6. Tank capacity:70-400l. 7. Assistant tank heating element, mg rod, reflector and controller can be provided. Characteristic: 1. Operated completely automatic if connect with intelligent controller. 2. Installed both on flat and inclined roof, and can be used with a electric booster (heating element) as to provide hot water without sunshine. 4. Suitable for camping area, holiday residences. 5. Stable and reliable performance, well wind resistance
Specifications Type: Flat-Plate Pressure: Pressurized Circulation Type: Indirect / Closed Loop (Active) Heating System: Thermosyphon (Passive) Connection Type: Direct-Plug Installation: Freestanding Housing Material: Stainless Steel Certification: CE, RoHS, UR Capacity: 300 Place of Origin: Shandong, China (Mainland) Brand Name: BTE & OEM & ODM Model Number: PJF-300/0.6 Product name: High efficiency flat-plate solar water heater designed for Argentina Item: flat plate solar water heater Application: shower Inner tank: SUS 304 Stainless Steel Outer tank: Galvanized Steel/0.5mm Use: Energy Saving Product Frame: Galvanised Steel Flt plat Absorption: 0.94±0.02 Max working pressure: 0.6MPA Cover transmission: 92% Packaging & Delivery Packaging Details: Packaging Details:water tank is 1 PC/Carton, solar panel is 1 PC/Carton. Sample put in wooden case, Standard package carton for sea delivery. Delivery Detail:within 5 days after received part of deposit Delivery Detail: 5 days
(1)Capacity: 176 chicken eggs 442 quail eggs 126 duck eggs 64 turkey/goose eggs (2)Sizes(L*H*W):74*60*98cm (3)Weights:43 kgs (4)Voltage:220V (5)Frequency:50HZ-60HZ
(1)Capacity: 3168chicken eggs 7956 quail eggs 2268 duck eggs 1296 turkey/goose eggs (2)Sizes(L*H*W):179*85*168CM (3)Weights:175 kgs (4)Voltage:110V~120V,220V~240V (5)Frequency:50HZ-60HZ
(1)Capacity:4224eggs 10128 quail eggs 3024 duck eggs 1728 turkey/goose eggs (2)Sizes:173*117*150CM (3)Weights:205kgs (4)Voltage:220V~240V (5)Frequency:50HZ-60HZ
SYSTEM DESCRIPTION VISION VPF series solar water heater usually incorporates a number of high efficiency flat panels, a top situated high pressure hot water tank, supporting bracket and accessories. MAIN FEATURES Reliable collector with average daily efficiency over 54.1% High efficiency flat panels for fast direct water heating System works without high temperature problem High pressure hot water supply from storage tank Compatible with electric or gas heating devices Working all year round even in cold climate Designed for 25 years working life SPECIFICATION Tank capacity: 100; 150; 200; 250; 300 Liter Flat panel size: 2000*1060*82 MM ( L*W*H ) Cover glass: Low-iron tempered glass with transmittance =92% Absorber coating: Selective black chrome or blue TiNOX coating Header and riser: High-quality red TU1 copper tubes 22MM inlet outlet Frame material: Anodized aluminum alloy with anti-aging elastic sealing Inner tank material: Food-grade stainless steel SUS304-2B or SUS316L Tank insulation: High-density PU foam with 80 hour heat preservation Outer tank material: High-quality color steel or stainless steel Bracket material: Galvanized steel; stainless steel; aluminum alloy Accessories: Solar controller; electric heater; magnesium anode Bracket angle: 25°; 38°; 45° Working pressure: 6.0 bar Working life: 25 years
SPECIFICATION Tank capacity: 100 ~ 1000 Liter Vacuum tube size: F58*1800MM Solar collector tubes: 10; 12; 15; 18; 20; 24; 30 Pcs Vacuum tube: Three-target coating Cu/SS-ALN(H)/SS-ALN(L)/ALN Heat pipe tube: High-quality TU1 copper 14MM or 24MM condenser Manifold: Copper pipe header, rock wool & PU insulation, aluminum casing Inner tank material: Food-grade stainless steel SUS304-2B or SUS316L Tank insulation: High-density PU foam with 80 hour heat preservation Outer tank material: High-quality color steel or stainless steel SUS304 Bracket material: Shaped strong aluminum alloy or stainless steel Accessories: Solar pump station; electric heater; magnesium anode Solar collector angle: 25°; 38°; 45° Hail Resistance: 25MM Anti-freezing: -40°C Working pressure: 6.0 bar