Melting Point: 56-58 Oil Content:
An additive intermediate prepared from highly active polyisobutylene (molecular weight=1000). The products can be used for producing various types of polyisobutylene succinimide and boronized dispersants. It can also be used for the production of emulsifiers and processing aids for petrochemical plants. The recommended addition is 2 % - 10 %.
SC178 is a modified micronized Fischer-Tropsch wax that is a primary replacement for fluorinated mixed wax powders for general purpose inks, coatings, wood finishes and more. A more economical one, balancing performance and cost, is available:Less matting,Good slipperiness,Excellent abrasion resistance and Anti-adhesion properties. SC178 has an average particle size of 5.5 to 6.5 microns with a maximum particle size of 21 microns. It is recommended to add 0.5-1% of SC178 to the system.SC178 is insoluble in solvents at room temperature as well as UV-based monomers and oligomers.
SC178 is a modified micronized Fischer-Tropsch wax that is a primary replacement for fluorinated mixed wax powders for general purpose inks, coatings, wood finishes and more. A more economical one, balancing performance and cost, is available:Less matting,Good slipperiness,Excellent abrasion resistance and Anti-adhesion properties. SC178 has an average particle size of 5.5 to 6.5 microns with a maximum particle size of 21 microns. It is recommended to add 0.5-1% of SC178 to the system.SC178 is insoluble in solvents at room temperature as well as UV-based monomers and oligomers.
Product features -There is a suitable phase transition temperature, which can meet the specific temperature that needs to be controlled -High linearity and narrow carbon number distribution -High heat storage capacity - High energy storage density - Constant temperature heat storage and release - Chemically stable and inert; Long service life - Non toxic, non corrosive -No supercooling and phase separation -Rapid crystallization rate and crystal growth rate Application fields of phase change materials: Thermal components for temperature regulation Industrial waste heat utilization Power generation and power transmission Clean energy Energy storage power plant Phase change energy storage water heater
Hello dear customers, *Price + procedure + specifications* JetA1 En590 D6
Vaseline is a mixture of mineral oil, paraffin and microcrystalline wax, when they are mixed together; Create something extraordinary - a smooth jelly with a melting point slightly above body temperature. Item Quality standard Result Single conclusion Relative density  60 C 0.815-0.880 0.862 Compliance with regulations Drop point C 38-70 46.4 Compliance with regulations (one) The upper layer shall be purple pink or brown Qualified Compliance with regulations Infrared absorption spectrum(two) Consistent with the map of the control group Qualified Compliance with regulations Cone penetration 25 C ±0.5 C 100-300 174 Compliance with regulations PH light pink Qualified Compliance with regulations Colour Lighter than colorimetric solution Qualified Compliance with regulations Impurity absorbance 290nm 0.75 0.15 Compliance with regulations sulfide 0.00017% Qualified Compliance with regulations Organic acid Should be red Qualified Compliance with regulations Heterogenous organic matter and fabric burning residue No pungent odor:0.5 0.02% Compliance with regulations Fixed oil, fat and turpentine No oil and sediment shall be formed Qualified Compliance with regulations Heavy metal ppm â?¤30 Qualified Compliance with regulations Arsenate 0.0002% Qualified Compliance with regulations Polycyclic aromatic hydrocarbon Comply with the Pharmacopoeia Qualified Compliance with regulations
Casting wax, high and medium temperature precision casting particles, bead shaped, high hardness, small linear shrinkage, good toughness, good stability, can be used repeatedly. Another water-soluble casting wax, repair wax, adhesive wax and other supporting products; Model wax is used as the mold material for art casting and precision machine tool processing. Of course, what is usually used for jewelry casting is "casting wax" in the shape of beads.It can apply in commercial hardware, golf heads, thin-wall parts, and aerospace industries. R&B Softening Point 72.5-85.0 Drop Melting Point 84.5-95.5 Penetration 14.0-20.0DMM Percent Ash
Application:It is used as color concentrate,Dispersion Agents,Adhesives,Inks and Paints,Coating,Cable Filling Compound,Lubricants agent and Mold release agent and so on. Features and Benefits: 1.Good hardness 2.Good lubricity 3.Good chemical stability Properties Unit Test Method Specifications Melting point C ASTM E 28 107 3 Density g/cc 23 C ASTM D 1505 0.93 Hardness d-mm 25 C ASTM D 5 5 Acid value Mg KOH/g ASTM D 1386 10 1 Appearance Yellowish powder
Application:As a lubricant, film remover and phase solvent for rubber and plastic processing, due to its high melting point and low viscosity, it promotes good resin fluidity, relatively reduces the power consumption of resin mixing, reduces the adhesion between resin and mold, is easy to remove film, and plays the role of internal and external lubrication. Features and Benefits: 1.Good thermal stability 2.Good lubricity 3.Good dispersion Properties Unit Test Method Specifications Mettler drop point C ASTM D3954 130 Density g/cc ASTM D1505 0.99 Hardness d-mm ASTM D-5
Application:It is widely used in the production of PE and PVC cables, PVC profiles and pipes. In the plastic processing industry, the internal and external lubrication of PVC is relatively balanced; The lubricity of oxidized polyethylene wax in the hard, transparent and opaque PVC formulation is better than that of other lubricants. Features and Benefits: 1.Good hardness 2.Good thermal stability 3.Good lubricity Properties Unit Test Method Specifications Mettler drop point C ASTM D3954 128 Density g/cc ASTM D1505 0.99 Hardness d-mm ASTM D-5
Features and Benefits: 1.Good lubricity 2.Good dispersion 3.Good chemical stability Properties Unit Test Method Specifications Mettler drop point C ASTM D3954 128 Density g/cc ASTM D1505 0.99 Hardness d-mm ASTM D-5
Application:It is used as color concentrate,Dispersion Agents,Adhesives,Inks and Paints,Coating,Cable Filling Compound,Lubricants agent and Mold release agent and so on. Features and Benefits: 1.Low viscosity 2.Good thermal stability 3.Good dispersion Properties Unit Test Method Specifications Melting point C ASTM E 28 110 3 Density g/cm3 23 C ASTM D 1505 0.93 Hardness d-mm 25C ASTM D 5 5 Acid value Mg KOH/g ASTM D 1386 15 1 Appearance Yellowish powder
Application:It is used as dispersion agents and lubricant for pigments or fillers such as thick color master-batch, polypropylene master-batch, additive master-batch and filling master-batch. Features and Benefits: 1.Low viscosity 2.High melting point 3.Good hardness Properties Unit Test Method Specifications Mettler drop point C ASTM D3954 102 Density g/cc ASTM D1505 0.99 Hardness d-mm ASTM D-5 5 Acid No. Mg KOH/g - 12 Viscosity mm2/s at 150 C Brookfield 5000 Particle size mesh ASTM D6913-2004 20
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 54-56 Oil content GB/T 3554 0.8 Color GB/T 3555 27 Light stability SH/T 0404 4 Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 70-72 Oil content GB/T 3554 0.8 Color - GB/T 3555 25 Light stability - SH/T 0404 5 Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 70-72 Oil content GB/T 3554 0.8 Color - GB/T 3555 25 Light stability - SH/T 0404 5 Penetration
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 58-60 Oil content GB/T 3554 0.8 Color - GB/T 3555 27 Light stability - SH/T 0404 4 Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 64-66 Oil content GB/T 3554 0.8 Color - GB/T 3555 25 Light stability - SH/T 0404 5 Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production. Properties Unit Test Method Results Melting point C GB/T 2539 50-52 Oil content GB/T 3554 0.8 Color - GB/T 3555 27 Light stability - SH/T 0404 4 Penetration 25C,1/10mm GB/T 4985 19
