Appearance Yellow paste Ingredient Mineral oil Thickener Lithium soap NIGL 2# Work penetration,25 C 0.1mm 265~295 Drop point 190 Run off(99C ,22h)% 1.2 Oil separation@100C/30h) 3.9 Copper strip corrosion(200C,30h) Qualified Work temperature -25~140C(-13~110F
Features of robot coating plant: 1. It is computerised and painting process parameter can be recorded in robot; 2. Plc programing and control system is used in this robot coating line; 3. This robot coating system is suitable for various shapes of articles; 4. A multi-axis servo motor is used in this robot coating line so it helps to make full use of paint and to get stable coating effect; 5. It is a high automation coating line, which helps to increase production and to save area; 6. The program in this robot coating line can control paint spray area and flow.
COF-01 Coefficient of Friction Tester Background The coefficient of friction pertains to the friction present between two surfaces. A lower coefficient of friction signifies that less force is needed for sliding to commence, while a higher value indicates a greater force requirement. The coefficient of friction varies based on the specific materials involved. In the context of packaging film, the coefficient of friction refers to the extent of 'slipperiness' exhibited by the packaging material when in contact with different components of the packaging machine or other materials. The management of the coefficient of friction holds significance in enhancing performance and mitigating issues during the creation, transportation, and storage of packages. Numerous factors, such as antiblock additives, corona treatment, antistatic agents, inks, varnishes, and adhesives, can influence the coefficient of friction. Application The COF-01 Coefficient of Friction Tester is designed to measure both static and kinetic coefficients of friction for a wide range of materials. These materials include plastic films, sheets, rubber, paper, paperboard, woven and non-woven fabrics, metal-plastic composite belts used in communication cables and conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials, and tires. The tester can also be adapted or modified to accommodate various other material types and testing standards. Standards: ASTM D1894, ISO 8295, TAPPI T816, GB 10006 Technical Features The COF-01 Coefficient of Friction Tester has been aiding the flexible industry since its inception. 1.It employs PLC control and an HMI touch screen for interaction. The design, of industrial caliber, assures stability and extended service life. 2.The driving mechanism is powered by a stepper motor and a precision ball lead screw. 3.It exhibits real-time test curves, and automatically records maximum, minimum, and average test results. 4.Both static and kinetic coefficients of friction are gauged. 5.Compliance with multiple test standards is incorporated. 6.A dot matrix microprinter is integrated. 7.The test plane is constructed entirely from aluminum. 8.It offers RS232 output and professional software(Optional). 9.Local language display is supported(Customized). Main Parameters Load Cell 5 N(or as required) Accuracy 0.5 F.S. Sled 200�±1g (or as required) Sled Size 63.5mm*63.5mm (or as required) Test Speed 100mm/min (ISO), 150mm/min (ASTM) Dimensions 540mm(L)*380mm(W)*240mm(H) Weight NW 21kg Power 110~220V 50/60Hz
Type:Industrial grease Part number: ISOFLEX TOPAS NB 52 Brand:Kluber Payment:T/T Delivery time:Within 3~5 work days Packaging details:foam and carton MOQ:1piece
Product Name:  BaisTec 9325G Application: BaisTEC 9325G is a versatile, versatile compound additive designed for efficient application For passenger cars, light diesel and four-stroke motorcycle engine oils. This "one" The "bulk" solution is ideal for companies producing different types of engine oil, so Production becomes easier! BaisTEC�® 9325G provides core requirements from API SG/ CD to API SL/CF/ CF-4. add The booster, BaisTEC 9325G can meet four-stroke motorcycle oil JASO MA or JASO MB performance requireme. Benefits: Versatile and versatile compound additive, which is perfectly balanced by a single compound agent Engine oil and diesel oil requirements. The use of appropriate reinforcing agents can meet the requirements of motorcycle oil. Meet a wide range of specifications from API SG/ CD to SL/ CF/ CF-4. Meet 10W-30, 10W-40, 15W-40, 20W-40 and 20W-50, etc Wide range of viscosity grades required. All data obtained from the engine test meets the requirements of the API license *(if applicable) Handling Information: Recommended storage and operating temperatures:40-45 C Maximum storage temperature:50 C Maximum allowable operating temperature:70 C Maximum mixing temperature:70 C Shelf Life: 24 months at ambient temperature Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Appearance Clear yellow liquid Active content, % 25 Water,% 5 Mineral oil,%
N990PANA-028 Panasonic Touch Lube Panasonic nozzle special oil Our company is mainly engaged in the sale of THK, NSK, KLUBER, Panasonic, BIRAL and other brands of grease.
Essential details Place of Origin:Guangdong, China Brand Name:JGH Application:Industrial Lubricant Type:Lubricating oil Specification:700g General Composition:BASE Oil Model Number:NS1-7 Brand:JGH Model:NS1-7 Capacity:700g Color:Green category: Injection molding machine grease Thickener type: Lithium grease Quality:High-Quality MOQ:1 Pcs Applicable brands:Nissei / Mitsubishi / Nippon Steel type:Universal injection molding machin
Physical and chemical properties: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 40 ± 1% Product characteristics 1.Impart surface smooth, inner soft and elasticity 2.Super yellowing-resistant, shearing resistant and warm water washing 3.Processing PH range from 1-12, high temperature 90-100 resistant 4.Improve sewing ability, especially suitable for cotton knitting fabric like terry towel 5.Highly resistant to electrolytes, suitable for resin finishing 6.Suitable for dyeing vat and jet machine processing Usage Method Exhausting: 1%-3% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry
Basic Characteristics Appearance: slight yellow transparent liquid Ionic nature: slight cationic pH value: 4.5-6.5 Solubility:can be dissolved in water at any ratio Hand feeling: fluffy, soft Features and advantages This product is amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber fabrics, such as polyester, nylon, acrylic and blended fabric, feel fluffy soft, smooth better; slightly yellowing, not suitable for bleaching or light-colored fabric; This product is particularly treated polyester velvet fabric can have a very good fluffy and soft feeling, good degree of fine, can significantly improve the softening of thickened fabric; Mixed with 803A series silicone oil suitable for cotton paint printing, to enhance the soft; Mixed with M series silicone oil suitable for cotton and poly-cotton knitted fabric feel finishing, feel soft and delicate; Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,the recommended using proportion can be diluted 1 :2.5 (20% solids) or diluted 1: 5 (10% solids), do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method. exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Basic Characteristics Appearance: slightly yellow transparence liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Hand feeling:instantly hydrophilic Features And Advantages This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; 1.This product is particularly suitable for processing cotton or polyester-cotton fabric, can achieve instantaneous hydrophilic effect, hand feeling general; 2.This product can be used as antistatic agent for chemical fiber fabric; cationic strong, and anion may occur coagulation, application before the need to do the application test, or add the company's specialty products anion and cation anti-coagulation agent; 3.high temperature resistance, suitable for a variety of processing technology, will not bring sticky roller, high suction rate; without APEO. Usage 1.This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,using after diluting at the recommended ratio1: 2.5 (20% solids) or 1 :5 (10% solids) , and adjust the PH value of acetic acid to 6-6.5; The speed should not be too fast, otherwise the bubble more; 2. After thinning, you can use exhausting method and continuous padding mothod: Exhausting method: the dosage (20% solids) 1-4% (owf), temperature 30-40 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 10-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year. -
Physical and chemical property: Appearance: Yellowish or Transparent Liquid Ionic properties: Slight Cation/Nonionic Solid content: 60 1% PH value (1% aqueous solution 20): 6-8 Product characteristics 1.Super smooth and soft 2.Especially suitable for polyester fabric and blends 3.Suitable for continuous process techniques, no stick roller 4.Without APEO Usage Method Diluted with water at ratio 1:5-7, self-emulsifying. Exhausting: recommended usage: 2--4% (O.W.F) Padding: 1540g/l The special process, please appropriate adjustments according to the samples. Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 12 months of storage expiry.
Physical and chemical property: Appearance: Yellowish or Transparent Liquid Ionic properties: Slight Cation/Nonionic Solid content: 60 1% PH value (1% aqueous solution 20): 6-8 Product characteristics 1.Super smooth and soft 2.Especially suitable for polyester fabric and blends 3.Suitable for continuous process techniques, no stick roller 4.Without APEO Usage Method Diluted with water at ratio 1:5-7, self-emulsifying. Exhausting: recommended usage: 2--4% (O.W.F) Padding: 1540g/l The special process, please appropriate adjustments according to the samples. Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 12 months of storage expiry.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Basic Characteristics Appearance: slightly yellow transparent liquid Ionic: slight cationic PH value: 4.5-6.5 Solubility: can be dissolved in water at any ratio Hand feeling: special soft, smooth Features And Advantages This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing; Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect. Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing; Dilution and use the method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 Package And Storage 50kg or 200kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
items names ISO Viscosity Grade Kinetic viscosity Viscosity index Pour point Flash poire Application mm Anti-wear hydraulic oil Eunaquer1 32 30.89 5.5 115 -27 226 Designed for use in most industrial hydaulic systems which require anti-wear protection,intended for severely stressed hydaraulic systems reuiring a high level of anti-wear performance. Anti-wear hydraulic oil Eunaquer2 46 45.38 7 112 -24 232 Anti-wear hydraulic oil Eunaquer3 68 69.05 9.2 109 -24 240 Anti-wear hydraulic oil Eunaquer4 100 101.35 12 108 -24 248
This product is a common rubber accelerator, widely used in natural rubber and synthetic rubber,It has a wide curing range,can be used alone, or used together with dithiocarbamate salts, thiurams, guanidine type and other alkaline accelerator. This product is easy to disperse in rubber, no pollution, not applicable to rubber products in food industry. Mainly used in the manufacture of tires, adhesive tape, rubber overshoes and other industrial rubber products.It is the main ingredient of producing MBS,CBS,NOBS,MZ,AZ or other accelerators. We produce various types of rubber products including fabric core layer conveyor belt,Steel cord conveyor belt,Raised edge conveyor belt,patterned conveyor belt,endless conveyor belt and the rubber plate.Please contact us to find products with reliable quality and competitive price
1.color white,grey 2.thermal conductivity:1 8 w/m.k 3.working temp:-40 220 4.shelf life:12 M
Physical and chemical property: Appearance: Colorless transparent liquid Ionic properties: Cationic Active content:53% Stability: Super Stable Kind: Finishing Hand Feeling: Super smooth Product characteristics l Soluble in cold water, impart surface smooth, inner soft and elasticity l Super yellowing-resistant, shearing resistant and warm water washing l Processing PH range from 1-11, high temperature 90-100 resistant l Improve sewing ability, especially suitable for cotton woven fabric l Highly resistant to electrolytes, suitable for resin finishing l Non-toxic to cellulase Usage Method l Padding recommended usage: 5-20g/l, 1g/l acetic acid as well l Exhausting: 0.5%-2% (O.W.F), 20 minutes l Adjust dosage according to different fabric and requirements Package And Storage l 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Type:UV Gel Brand Name:LADISGEL Model Number:rubber top coat Place of Origin:Guangdong, China Certificate:SGS GMPC ISO MSDS Color:Clear MOQ:12pcs Volume:10 ml/bottle Smell:Odorless Soak off:EasilyLasting time: 3-4 weeksService:Sample+OEM Application:Lady's Nail Beauty Cure time:LED Lamp 30s UVLamp 2mins
