Find Verified Metal Powder Suppliers, Manufacturers and Wholesalers

Particle: 10-400mesh (2mm-0.0035mm)
Magnesium content: above 99.5%
Active magnesium: above 98.5%
Impurities:
Zn: nmt 0.1%
Fe: nmt 0.2%
Ca: nmt0.15%
Mn: nmt1.0%
Cl: nmt0.005%
H2o: nmt 0.1%
Insoluble substances in hcl: nmt0.2%
Other metals: nmt0.5%
Loose density: 0.35-0.75g/cm3.

Magnesium powder is inflammable and explosive. It gives out temperature and dazzling white light when burning. So it's been widely used in military aerospace and other scientific and technological fields. Because of its active chemical characteristic, magnesium is usually used in metallurgy industry: it is used as dioxidizing agent and purifying agent in steelmaking and non-ferrous metal casting, and as dehydrating for organic compounds. Magnesium powder can also be used directly for organic compounds of magnesium. Especially in recent years, magnisium has been used more and more in spray coating and preservation industries. It is also used a lot in monocrystalline silicon directly olycrystalline silicon producing and metallurgy powder die-casting industry.


100kg/drum

Xundake procures a variety of quality machinery parts through an extended network of suppliers. Contact us to know more about the business opportunities in China.

Xundake procures a variety of quality machinery parts through an extended network of suppliers. Contact us to know more about the business opportunities in China.

Size and composition of a variety of high-quality single-uniform hybrid nano-copper-nickel composite powder can be controlled

Application:
1. Metal nano-lubrication additives: add 0.1 to 0.3 percent from oil, grease, in the process of Moldova Moldova Sassafras Sassafras Vice self-lubricating surface, he studied Film, a significant reduction in the Mount Sassafras, deputy anti-wear friction-reducing properties. And a single metal nano-lubrication additives, to reduce the amount of powder by adding three to five times, to repair a short time, Mount Sassafras coefficient of small and long-term stability.

2. Block of metal nanocomposite materials used: inert gas protection of the powder sintering Preparation large copper-nickel metal nanocomposites.


A plastic bag lined anti-static packaging, 100 ~ 1000g sub-bag.

1. Efficacious comburent: Adding nickel nanoparticle into the solid fuel propellant of rocket increases combustion heat, combustion efficiency and combustion stability.
Conductive paste: Electronic size is widely used for wiring, packaging and connection in microelectronic industry, it plays an important role in the minimization of electronic device. The electronic paste made of nickel, copper and aluminum nanoparticle has good performance, and it helps further minimize the circuit.

2. Magnetic fluid: The magnetic fluid made of iron, cobalt, nickel and its alloy particles provide excellent properties, they are widely used in seal shock absorption, medical equipment, acoustic adjustment, optical display, etc.

3. Efficacious catallyzer: Due to its large surface and high activity, nickel nanometer has good catalyzing effect, it is applicable to organic hydrogenation reaction, tail gas processing, etc.

4. High-performance electrode: Through proper processes nickel nanoparticle can be made into electrode with huge surface, which considerably improves discharge efficiency.

5. Actuating sintering additive: As nanoparticle has large surface and superficial atom ratio, it is in high-energy state, it has good sintering ability even under low temperature; it is an efficacious sintering additive, which substantially lowers the sintering temperature of particle metallurgy products and high-temperature ceramic products.

6. The superficial conductive coating processing of metal and non-ferrous metal: Due to their high-activity surface, aluminum, copper and nickel nanoarticle can coat under oxygen-free condition below smelting point of the particles. This technology can be adopted in the manufacture of microelectronic devices.



This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.

Application direction:
1. High-performance magnetic recording materials: With its advantages including high coercivity, high saturation magnetization intensity (up to 1477km2/kg), signal-to-noise ratio and good oxidation resistance, it remarkably improves the performance of tape, large-capacity hard disk and soft disk.
2. Magnetic fluid: The magnetic fluid made of iron, cobalt, nickel and its alloy particles provide excellent properties, they are widely used in seal shock absorption, medical equipment, acoustic adjustment, optical display, etc.
3. Microwave-absorption materials: Metal nanoparticles has special absorbing ability to electromagnetic wave. Iron, cobalt. Zinc oxide particles and its carbon package particles can be used as military high-performance millimeter wave invisible materials, visible light-infrared invisible materials and structural type invisible, and mobile radiation shielding materials.
4. Magnetic-conductive paste: With the advantages of high saturation magnetization and high magnetic inductivity of iron nanoparticle, magnetic conductive size can be made, it is used for the binding structure of fine magnetic head.
5. Agent-driven Nano. Some with magnetic nanoparticles, as the carrier made its agent-oriented, will enable the drug under the outer magnetic field gathered at a local body so as to the location of the pathology of the high concentration of drug treatment, particularly for cancer, tuberculosis, and so on.


This product should be stored in dry, cool and sealing of the environment, can not be exposure to air, in addition should avoid the heavy pressure, according to ordinary goods transportation.

Content: 99.9%
Specification:200-300
Mesh density: 8.9
Melting point: 950

1) quick detail:
M.F.: cupb3sn6zn6
Cas: copper: 7440-50-8
H.S.Code: 7406104000
Un: 3089

2) properties: grey or golden yellow irregularly powder.

3) physicals:
Particle size (mesh) loose density(g/cm3)
-200. -300. -500. 2.5-3.5

4)chemical compositions (%):
Composition cu sn zn pb density hall flow s/50g
Cu85sn6zn6pb3 83-86 5-7 5-7 2-4 2.5-4.5 35-40
Cu80sn10pb10 79-81 9-11 9-11 3.5-5.0 20-30
Cu80zn20 79-81 19-21 2.0-4.5 30-35
Cu90sn10 89-91 9-11 2.5-4.5 20-35
Cu90sn10 84-86 14-16 2.5-4.5 20-35
Cu80sn20 79-81 19-21 3.0-5.0 20-35

5) applications: powder metallurgy, oil-contained bearing, friction materials.
6) storage: keep in closed dry room; avoid spillage, sparks or other source of ignition.





In 25kg, 50kg iron drums with double plastic bags inner, on wooden pallet.

Appearance: grey dark metallic powder
Common uses: as an alloy addition is superalloys; production of sheet foil, strip or wire for various industrial application
Re content: 99.99%min.
Total metallic impurities: 100ppm m.



Vacuumized plastic bag inside, net each 1.0kg; steel drum outside, net each 20-30kg.

Name: Magnesium Chloride Anhydrous
CAS Number: 7786-30-3
Pubchem: 24584
EC No.: 232-094-6
Properties: Molecular Formula: MgCl2
Molar Mass: 95.211 g/mol
Appearance: white or colorless crystalline solid
Boiling Point: 1412 C
Solubility in water: Temp. 20 C 54.36 g/100ml
Temp. 100 C 72.6 g/100ml.


25kg or 50kg in a PP bag or as clients' request.

We offer grinding discs for metal,rail,stainless steel,stone & glass,foundry,brass & aluminum.We also offer cutting discs for metal,rail,stainless steel,stone,foundry and pvc.

We are a manufacturer and exporter specialized in producing copper powder including water atomized pure copper powder, brass powder (CuZn30, CuZn20), bronze powder (CuSn10, CuSn13) and copper alloy powder (CuPb10Sn10, CuPb30, CuPb24Sn1, CuPb3Sn6Zn6, CuPb7Sn7Zn3, CuSn6.5P0.3 etc.)

25kg/barrel.

Name: Magnesium Chloride Anhydrous
CAS Number: 7786-30-3
Pubchem: 24584
EC No.: 232-094-6
Properties: Molecular Formula: MgCl2
Molar Mass: 95.211 g/mol
Appearance: white or colorless crystalline solid
Boiling Point: 1412 C
Solubility in water: Temp. 20 C 54.36 g/100ml
Temp. 100 C 72.6 g/100ml


With plastic bag per 25kg then with Jumbo bags or as clients' request.

Cobalt powder

1kG per package

Sintered metal filters are a type of porous filter made by sintering metal powder particles together. Sintering is a process that involves heating metal powder to a temperature just below its melting point, allowing the particles to fuse together and form a solid structure. The resulting filter material is highly porous with a controlled pore size distribution that can filter out particles of a specific size.
The pore size of sintered metal filters can range from a few microns to several hundred microns, depending on the required filtration level. The pore size is controlled during the manufacturing process to ensure consistent and precise filtration.
Sintered metal filters provide high filtration efficiency due to their precise pore size distribution. They can filter out particles and contaminants of a specific size, making them suitable for a wide range of applications where filtration accuracy is critical. Additionally, sintered metal filters are easy to clean and can be reused multiple times, making them a cost-effective solution in many applications.
Products Features
Highly porous structure: Sintered metal filters have a highly porous structure that allows for efficient filtration of liquids and gases. The porosity is controlled during the manufacturing process to ensure consistent and precise filtration.
Precise pore size distribution: Sintered metal filters offer a precise pore size distribution, which allows for accurate filtration of particles and contaminants of a specific size. This makes them suitable for a wide range of applications where filtration accuracy is critical.
High strength and durability: Sintered metal filters are made from metal powders that are sintered at high temperatures, resulting in a strong and durable filter material. They can withstand high temperatures, corrosive environments, and high-pressure applications.
Chemical resistance: Sintered metal filters are available in various metals, each with different chemical properties. This allows for customization of the filter material to suit specific chemical environments and applications.
Easy to clean and maintain: Sintered metal filters can be easily cleaned and reused multiple times, making them a cost-effective filtration solution. They can be cleaned by backwashing, ultrasonic cleaning, or chemical cleaning, depending on the application requirements.
Products Applications
Sintered metal filters are used in a wide range of industries and applications, including oil and gas, chemical processing, pharmaceuticals, food and beverage, and water treatment. They are often used to filter out impurities, contaminants, and solids from liquids and gases. The filters can be made from various metals, including stainless steel, bronze, nickel, and titanium, depending on the specific application requirements.

Technical Parameters of bismuth oxide powder

bismuth oxide powder color: light yellow

bismuth oxide powder true density: 8.9g/cm3

bismuth oxide powder melting point: 820

bismuth oxide powder molecular weight: 465.96

bismuth oxide powder morphology: spherical

bismuth oxide powder specific weight: 8.9

Note: Above 710 oC, the melting of bismuth oxide can erode or dissolve metal oxides.

Application direction of bismuth oxide powder

Above 710 oC, melting bismuth oxide can erode or dissolve metal oxides. The main purpose: the electronics industry; pressure-sensitive resistors; Capacitance of major doping materials; medicine; artificial bone imaging; glass; Bismuth oxide in ceramics can increase the index of refraction of glass and significantly improve the performance of ceramic material. It is the best substitute of "Lead Glaze". Also, Catalysts; Disinfectants; Fireproofing papers and polymers; High nonlinear susceptibility materials; Magnets; Rubber; Solid electrolytes; Substitute for lead oxide in glass or porcelain; Vulcanization.

CAS No: 12069-32-8 ENINEC No: 235-111-5 MF: B4C
Grade Standard:General Reagent, Electron Grade Purity:99% Appearance: Grey black Powder
Application:nuclear materials, gun nozzles Size:500nm, 1-3um
Quality: High
Note: We can supply different size products of nano boron carbide b4c powder according to client's requirements.

CAS No: 409-21-2
ENINEC No: 206-991-8 MF:SiC
Grade Standard:Industrial, Reagent, Electron
Purity:99% Appearance: Grey green Powder
Application:Cutting Tool area, composite material Size:50nm,80-100nm,0.8um,1-2um,5um,7um,10um,15um
Form:Beta
Note: We can supply different size products of refractory material sic powder according to client's requirements.

CAS No: 12070-08-5 ENINEC No: 235-120-4 MF: TiC
Grade Standard:General Reagent Purity:99.5% Appearance: Black Powder
Application:conductivity Size:40-60nm, 1-3um Quality:High
Note: We can supply different size products of titanium carbide TiC nanopowder sale price according to client's requirements.

Product Description
Square Foot Agricultural Soilless Culture Expanded Perlite In Gardening
Expanded Perlite powder is a super light weight agricultural potting media that is clean and easy to use as well as environmentally friendly, offering many advantages allowing you to get the very best from your plants, nurturing them and helping them grow healthy and strong. The unique properties of perlite provides for excellent aeration and drainage while still ensuring good water retention.

Q: Are you trading company or manufacturer ?
A: We are factory.


Q: How long is your delivery time?
A: Generally it is 2-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Product Description
Henan Daye Metallurgy Casting Material Co., Ltd. is a professional manufacturer engaged in the research, development, production, sale and service of slag remover, carbon additive, riser insulation agent, and perlite series products. As a industry frontrunner specializing in metallurgical slag remover production in China, our product â??Daye Brandâ?�R-2, R-3, R-4 & R-5 can replace similar imported products completely.

Product Name
Perlite casting slag sand for foundry
Material
Mineral
Color
Canary yellow
Standard
GB/T 19001-2008 idt ISO 9001: 2008
Grade
Daye R-2
Brade
Rock
Granularity
8-18 mesh
Used
Metallurgical Casting
Products Show



The product slag remover has occupied almost 60% market in China, which are selling well in all cities and provinces around China, and have ever been exported to the USA, Australia, Indonesia, Vietnam and South Korea.

The good performance of slag removing and metal purification is highly recognized and praised by different customers at home and abroad

Packing & Delivery
Packaging & Delivery

Packaging Details

1) Net weight 25kg per unit (plastic woven bag)

2) As customer's request.



Delivery Time

10-20 days according to the quantity


Our Certifications





FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.