PTFE lubricated ultrafine powder Lubricating powder is treated with irradiation for crushing treatment, which is easy to disperse in rubber, thermoset plastic, thermoplastic, grease, ink and oil, and it is not agglutinate, non - forming, and improves its lubricity and reduces wear, friction.
Appearanceslightly yellow viscous liquid IonicityCationic PH value6--8 Solubilityself-emulsifying, can be can be dissolved in water at any ratio Active content30 1% Hand feelingHydrophilic, comprehensive soft,fluffy and smooth
MP3 Grease Application: 1. Suitable for lubricating rolling bearing, sliding bearing and other friction points of general mechanical equipment. 2. Application temperature range:-20ºC to 120ºC. -
Product overview The ar60h single-line parallel centralized lubrication system contains grease pump, single-line distributor and monitoring unit. The system not only improves the grease suction performance of the grease pump and the grease injection performance of the grease distributor, but also solves the grease deterioration problem caused by long-term accumulation on the bottom of the reservior. Applications Commercial vehicle, machine tool, printing machinery, packaging machinery, and agricultural equipment. Working principles The system controls the grease pump for periodic running by the monitor. When the system works, the monitor drives the grease pump for outputing grease. The grease is divided to each greasing points through single line distributor. The system releases pressure when finish one time circle work.
Product Overview The L83/AL103 Series is single-line lubrication system, consists of plunger pump, single-line distributor, cycling indicator and monitor, using high-viscosity NLGI-3# grease in alpine and frozen regions. Applications Wind turbine, port machinery, mining machinery, agricultural machinery, hoisting machinery,construction machinery, beverage equipment, etc. Working Principles The LCD monitor controls the plunger pump for periodic running. When the system works, the monitor drives the grease pump for out put grease. After entering the grease tube, the high-pressure grease is supplied to each greasing points successively through the grease distributor . If the machinery equipment being lubricated is equipped with the air source, this ALP83/103 grease pump series can leave out its own air pump and air holder.
Introduction: Al50 centralized lubrication system, a new generation vehicle lubrication system, which absorbs ar60 gear pump technology and other 19 patents. Al50 series is designed on the basic of our years of centralized lubrication in commerical vehicles, having unique outlook design. Application: Suitable for commercial vehicles, other small machine, wonderful for bus coach vehicles.
Product Overview Suplub-W system is the new intelligent wind turbine centralized lubrication solution that integrates computer, automation, wireless data communication and centralized lubrication technology. It consists of intelligent monitor unit, grease supply unit and waste oil recovery unit. Wireless remote control center can be installed in wind farm headquarters for monitoring the working condition of all lubrication systems. Applications Automatically lubricate the main bearing, yaw bearing, pitch bearing, generator bearing of the wind turbine generator. Working Principles The working process of the Suplub-W lubrication system contains three steps: Step I: When the pause interval ends, the intelligent controller firstly sends start signal, and then the high-pressure lubrication pump starts and the grease is conveyed to the main grease line. When the grease pressure reaches the setting value, the intelligent controller successively opens the points that need grease, and the grease is injected to the points after accurately measuring according to the needs. Step II: After all the points are lubricated, the intelligent controller sends waste grease recovery signal, and the waste grease suction & draining device starts to recover the waste grease. Step III: After the waste grease recovery finishes, the intelligent controller sends stop signal to each actuator, the high-pressure lubrication pump stops and the lubrication system enters the next pause period. Contact:Frank Niu
We are in strong position to supply : Barium petroleum sulphonate Grades: 45% and 55% of purity. Loading from china by sea. For more details, please contact us. Best regards.
We supply fuel additive : Vanadium inhibitor, Two grades, For gas turbine Packing: 250 kg net in steel drum Quantity: 3000mt per month Please contact us for details if you need. Best regards.
We are in strong position to supply : Tbn booster, Tbn 400, Calcium sulphonate Top quality, Loading from china by sea. For more details, please contact us. Best regards.
Scope Lubricant liquid rust meter according to national standard GB / T11143 prescribed design and manufacture of metal corrosion can be determined when the lubricating oil, hydraulic oil, turbine oil and other fats in water Features 1, the LCD screen English display interface, menu prompts input; 2, the use of computer programs temperature control, high precision, good accuracy; 3, user-friendly design, the instrument automatically timed, when the reminder alarm; 4, instrument software interface displays a variety of parameters such as clocks date and current tips; 5,4 group sample design, the user can choose to open any one set of experiments, without disturbing each other according to their own circumstances; Technical Parameters 1, temperature range: room temperature ~ 100 ? 2, temperature accuracy: ± 0.5 ? 3, when the control range: 0 to 99 hours arbitrarily set 4, stirring speed: 1000r / min 5, the maximum power consumption of 2500W 6, Sheng-like holes: 4, customers can turn to any one set of experiments, interfering 7, ambient temperature: room temperature ~ 35 ? 8, relative humidity: =85% 9, the power supply voltage: AC220V ± 10% 50Hz
Pibsa1000 polyisobutylene succinic anhydride (thermal adduction pibsa) Description Pibsa1000 is a lubricant additive intermediate prepared from high reactive polyisobutylene (mn=1000) by thermal adduction process. The ashless dispersant produced from pibsa1000 possesses fine detergency and favourable low temperature sludge dispersion. Special features Free of chlorine Applications Used for preparation of polyisobutylene diene and polyene succinimide and bononize ashless dispersant. Used for preparation of emulsifying agents for emulsion explosives. Used for preparation of processing aids for petroleum chemical plant Characteristics Item Typical value Density ( Flash point (coc), (gb/t3536),180 Kinematic viscosity (100¡), (gb/t265), mm2/s 800 Tan, (q/jth012, affix a), mgkoh/g 110 The enterprise standard q/jth012-2008 Packing and handling It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related material safety data sheet. 170kgs/metal drum
Rd3161l multifunctional engine oil additive for ci-4/sl 1. Description Rd3161l has been developed to formulate high quality automotive engine oils and multigrade oils. The following performance levels can be achieved with oils formulated with rd3161l. 2. The recommended dosage Performance level Dosage (wt%) Ci-4¡¢ch-4/sl 12.0 Cf-4/sl 7.5 Cf-4/sj 6.2 Cd/sf 4.8 3. Characteristics Item Typical value Test method Flash point (coc) ¡ãc, 180min Gb/t 3536 Kinematic viscosity (100¡ãc), mm2/s Report Gb/t 265 Calcium, wt%, 3.0-4.0 Sh/t 0270 Tbn, mg koh/g, 110-120 Sh/t0251 Zinc, wt%, 1.1-1.5 Sh/t 0226 Phosphorus, wt%, min 0.8-1.1 Sh/t 0296 Nitrogen, wt%, 0.5-0.7 Sh/t0224 Magnesium, wt% 0.15-0.25 Sh/t0027 Boron, wt% 0.1-0.2 Sh/t0227 Molybdenum, wt% 0.02-0.03 Spectrophoto Metry 4. Packing and storage The packing, marking, transportation, storage and delivery acceptance should meet the requirements of sh/t0164. It is packed in 200 litre metal drum. Store in dry, clean and ventilating warehouses. It is packed in 200 litre metal drum. Store in dry, clean and ventilating warehouses.
T202 zinc butyl octyl primary alkyl dithiophosphate Description T202 is a zinc thiophosphate, which is prepared from thiophosphoric acid made from butyl octyl alcohol. When added into oils, it can inhibit oil oxidation. It has antioxidation, antiwear and corrosion proof. The product is a multi-function additive with antioxidation and antiwear and anticorrosion. Special features Better antioxidation Better abrasion resistance Better thermal stability Applications Primarily used for various internal combustion engine oils Used for gear oils, hydraulic oils, bearing oils, rail oils and metalworking oils; but it can not be used with silver parts. The dosage: 0.5-3.0% Characteristics Item Typical value Density (20), (gb/t2540), kg/m3 Report Flash point (coc), (gb/t3536), 180 S, (sh/t0303), m% 16.0 P, (sh/t0296), m% 8.0 Zn, (sh/t0226), m% 8.5 Ph value, (sh/t0394, affix a) 6.0 Executive standard: sh/t0394-1996 Packing and handling It is packed in metal drums of 200 litres. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related material safety data sheet. 200kgs/metal drums
Rd3161l multifunctional engine oil additive for ci-4/sl 1. Description Rd3161l has been developed to formulate high quality automotive engine oils and multigrade oils. The following performance levels can be achieved with oils formulated with rd3161l. 2. The recommended dosage Performance level Dosage (wt%) Ci-4¡¢ch-4/sl 12.0 Cf-4/sl 7.5 Cf-4/sj 6.2 Cd/sf 4.8 3. Characteristics Item Typical value Test method Flash point (coc) c, 180min Gb/t 3536 Kinematic viscosity (100c), mm2/s Report Gb/t 265 Calcium, wt%, 3.0-4.0 Sh/t 0270 Tbn, mg koh/g, 110-120 Sh/t0251 Zinc, wt%, 1.1-1.5 Sh/t 0226 Phosphorus, wt%, min 0.8-1.1 Sh/t 0296 Nitrogen, wt%, 0.5-0.7 Sh/t0224 Magnesium, wt% 0.15-0.25 Sh/t0027 Boron, wt% 0.1-0.2 Sh/t0227 Molybdenum, wt% 0.02-0.03 Spectrophoto Metry 4. Packing and storage The packing, marking, transportation, storage and delivery acceptance should meet the requirements of sh/t0164. It is packed in 200 litre metal drum. Store in dry, clean and ventilating warehouses. 185kgs/metal drums
Rd3133 additive package for engine oil cd/cf, cc/sc, cb/sb, cc/sd £¬cd/sf 1. Description Rd3133 is dark brown viscous liquid prepared form varieties of additives, such as excellent detergent, dispersant, antioxidant and corrosion inhibitor and antiwear agent. The recommended treat meet the following classification and specification requirements. 2. The recommended dosage Api Multi/mono Treating rate(wt%) Cd/cf Multi 6.0 Cd/cf Mono 5.5 Cc/sc Multi 3.0 Cc/sc Mono 2.8 Cb/sb Mono 2 Cd/sf Multi 4.5 Cc/sd Multi 3.8 3. Characteristics Item Typical value Test method Density (20¡ãc), kg/m3 Report Gb/t 1884 Flash point (coc) ¡ãc, 170 Gb/t 3536 Kinematic viscosity (100¡ãc), mm2/s Report Gb/t 265 Calcium, wt%, 6.0 Sh/t 0270 Zinc, wt%, 1.6 Sh/t 0226 Phosphorus, wt%, min 1.2 Sh/t 0296 Tbn, mg koh/g, 180 Sh/t 0251 4. Packing and storage The packing, marking, transportation, storage and delivery acceptance should meet the requirements of sh/t0164. It is packed in 200 litre metal drum. Store in dry, clean and ventilating warehouses.
T107 (tbn400) long-chain linear alkyl benzene high base synthetic magnesium sulfonate Description T107 is prepared from long-chain (c20-24) linear alkylbenzene sulfonic acid. It can provide lubricants with excellent acid neutralizing ability, fine detergency & dispersion effects and antirust performance. Special features Excellent acid neutralizing ability Detergency property Low ash content Antirust performance Applications Primarily used for blending high grade engine oils, especially for blending the oils with low ash content The dosage: 0.5-3.0% Characteristics ItemTypical value Density (20), (gb/t1884), kg/m3Report Flash point (coc), (gb/t3536), 175 Kinematic viscosity (100), (gb/t265), mm2/s95 Tbn, (sh/t0251), mgkoh/g400 Mg, (q/ths 09), m%9.2 Packing and handling It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related material safety data sheet. 200kgs/metal drum
USP Mineral Oil (Food Grade), a product used for lubricating sewing machines for sacks without contaminating grains (cereals, seeds, salt, grains, etc.) WJWAX specializes in producing food-grade and cosmetic white oil. If you have any needs in this area, please contact us to request TDS or COA. Both FCL and LCL quotations are acceptable. USP mineral oil, which is food grade, can be used for lubricating sewing machines. Here's how it is utilized: Lubrication: Mineral oil is applied to the moving parts of sewing machines to reduce friction and ensure smooth operation. It helps to prevent wear and tear and prolong the lifespan of the machine. Protection: The oil forms a protective barrier on the metal surfaces, preventing rust and corrosion. This helps to maintain the integrity of the machine and prevents damage from moisture or humidity. Noise Reduction: Proper lubrication with mineral oil can help reduce the noise produced by the sewing machine, resulting in quieter operation. When using USP mineral oil for lubricating sewing machines, it is important to ensure that the oil meets food-grade standards and is safe for contact with fabrics and threads. Regular maintenance and proper lubrication can help keep the sewing machine in optimal working condition.
Naphthenic mineral oil serves as a valuable rubber plasticizer for shoe soles, enhancing their flexibility, comfort, durability, and resistance to environmental factors. Its addition contributes to the overall quality and performance of the footwear, providing a superior user experience. This white oil is mainly available in two models, N4010 and N4006, with the difference in viscosity and flash point. The specific application effects are as follows: 1. Plasticization: It acts as a plasticizer, enhancing the flexibility and workability of rubber compounds used for soles. It improves the ability of the rubber to deform and recover its shape, allowing for greater comfort and ease of movement. 2. Softness and Comfort: The addition of naphthenic mineral oil as a plasticizer imparts a softer and more cushioned feel to the sole. This improves the overall comfort level, reducing the impact on the feet and providing a more pleasant walking or running experience. 3. Durability and Wear Resistance: It enhances the durability and wear resistance of shoe soles. It helps to increase the tensile strength and tear resistance of the rubber compound, making the soles more resistant to abrasion and extending their lifespan. 4. Processing Aid: It acts as a processing aid during the manufacturing of soles. It improves the flow properties of the rubber compound, facilitating easier mixing, molding, and shaping processes. This results in more efficient production and consistent quality of the shoe soles. 5. Resistance to Environmental Factors: It helps improve the resistance of soles to various environmental factors. It provides a barrier against moisture, preventing water absorption and reducing the risk of sole degradation. Additionally, it enhances the resistance to aging, UV exposure, and chemical agents, ensuring the longevity of the shoe soles. 6. Adhesion and Bonding: Naphthenic mineral oil aids in the adhesion and bonding of the sole to other components, such as the upper material or the outsole. It improves the interfacial properties and promotes strong and reliable bonding, ensuring the structural integrity of the shoe. It is important to note that the selection of the appropriate naphthenic mineral oil grade is crucial to achieve the desired properties in shoe soles. Factors such as viscosity, volatility, and compatibility with other additives and rubber ingredients should be considered during formulation.
I have a Russian client who asked me: We need a base for preservation oil for galvanized rolled steel, and the answer is yes. We are a white oil manufacturer and can provide white oil products with various viscosities and flash points. Generally speaking, 22# and 100# white oil are very suitable for the rust prevention of Galvanized Rolled Steel. If you are interested, please feel free to consult us. White oil is not commonly used specifically for enhancing the corrosion resistance of galvanized rolled steel. Galvanized steel already possesses a protective zinc coating that provides excellent corrosion resistance. However, Mineral oil can be utilized in other ways to protect galvanized steel or other metal surfaces from corrosion. One application of white mineral oil is as a rust preventative or lubricant. When applied to the surface of galvanized steel, it can help inhibit the formation of rust by creating a thin protective barrier. The oil acts as a moisture barrier, preventing water or other corrosive agents from coming into direct contact with the metal surface. Additionally, white mineral oil can be used as a cleaning agent for removing dirt, debris, or contaminants from the surface of galvanized steel. Keeping the surface clean and free from potential corrosive agents can help maintain the integrity of the galvanized coating and prevent corrosion. It's important to note that the use of white mineral oil on galvanized steel should be done with caution, as certain additives or impurities in the oil may have adverse effects on the galvanized coating. It is recommended to use highly refined white mineral oil to minimize the risk of any negative interactions.
