Astm D665 Rust-Preventing Characteristics

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

REBCO (Russian Export Blend Crude Oil) is a sort of Russian Export Crude Oil with a mixture formed in the system of pipeline Transneft by mixing heavy sour crude Ural from the Volga region and low-sulfur oil in Western Siberia, the relevant characteristics to the brand Urals. Urals brand oil is supplied through the Baku-Novorossiysk pipeline system and the Druzhba pipeline. Components of petroleum are separated using a technique called fractional distillation, i.e. separation of a liquid mixture into fractions differing in boiling point by means of distillation, typically using a fractionating column. Petroleum includes not only crude oil, but all liquid, gaseous and solid hydrocarbons. Our company exports to contries such as Malasia, Singapore, China, Taiwan and all countries in Europe and parts of Africa We'll be glad to have a deal with you.

Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0% High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5% The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential. When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.

Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0% High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5% The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential. When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.

TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium

MOBILGEAR 600 XP 220 Gear Oil Mobilgear 600 XP 220 Descriptions MOBILGEAR 600 XP 220 is extra high performance gear oil that has outstanding extreme pressure characteristics and load-carrying properties, intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. MOBILGEAR 600 XP 220 is designed to stay ahead of the changing needs of gearbox technology. Gearbox technology design trends are towards smaller units with similar power throughout. This increase in power density places increased demands on gear oils. MOBILGEAR 600 XP 220 is formulated to meet the stress by providing extra protection for gears.

MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max

Slack Wax, minimally refined paraffinic wax obtained from the dewaxing process of base oil lubricants. It is used in a wide range of applications, including as a blending component in the production of paraffin waxes, as a waterproofing agent, and in the manufacture of candles, rust protective products, and board sizing.

Residue Wax also known as foot oil is a byproduct obtained during the production of semirefined paraffin wax It contains oil content that prevents it from being solid at room temperature Residue wax is used in various applications including the rubber industry shoe polish formulations and in making various protective coatings