Zhejiang keli plastic machinery co.,ltd has many types of IBM machine,such as SZCX130/30T,SZCX160/45T,SZCX250/60T,SZCX300/70X,SZCX700/135X.We have more than 20years in packaging field.any questions,
zhejiang keli plastic machinery co.,ltd is specilized in one step injection blow molding machine and injection blow mold more than 20 years.the machine is widely used in food,cosmetic,pharmaceutical packaging field.
1.Forming stations:15 stations 2.Forming speed:3-5m/min 3.Frame of machine:350h steel 4.Main motor power:4kw 5.Pump station:4kw
Product: bridge of the nose strip, material: plastic, width: 3mm, thickness: 0.8mm-0.9mm, color: white, a roll of 5 kg =2500m.
KOWEY Series Telescopic Arm Robot is applicable to all types of horizontal injection machine of 50T-1800T for take-out products and sprues. Model KWIII are with two types of arms, single stage and telescopic type. The single function is to clamp products, and the full function is to take-out products and sprues. Swing arm robot with one axis servo ranges of model KWX. After installed this robot, the productivity will be increased 10-30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
5L, 10L extrusion blow molding machine JN-90U double station single die head for 10L ,1 cavity double die head for 5L, 2cavity The machine is used to produce the bottles, engine oil bottle, water container etc. Welcome inquiry!
Kowey series servo motor arm Robot is applicable to all types of horizontal injection machine of 30T-300T for take-out products and sprues. It has ranges of model BRTP and BRTW, with two types of arms, single stage and telescopic type. The single function is to clamp products, and the full function is to take-out products and sprues. Swing arm robot with one axis servo ranges of model BRTP. After installed this robot, the productivity will be increased 10-30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.
Jonsen specializes in tooling and molding for Precision part, Multi-shot(Multi-K), Unscrewing, Thin wall and Encapsulation parts. We use high quality material, major steel supply. The mold drawing is the most important for each mold, any good mold is based on a good drawing, our designing engineers have very rich experience in the mold designing field, each engineer has worked in this field many years and has designed many different kinds molds, they always use their rich experience and responsibility to analyse and optimise each part drawing from our clients to reduce the probable risk. They can provide many good suggestions to customers and our mold makers. Product material: Plastic, ABS/PA/PC/PP/PE/POM/NYLON/TPU/TPE Cavity: multi cavity Save mold cost: 25% Professional for customized molds
CPP/CPE cast film extrusion line adopts the method of single-extruder or multi-extruder co-extrusion to produce single-layer or multi-layer co-extrusion film, and multipliers can be used to realize the production of the maximum 72-layer film. All imported metering pumps, digital precise control of material percentage can achieve the precise input of special materials and reduce the cost. Application: Food packaging: product packaging with higher requirements on display effect, such as bread, dry food, etc. It can be used to twist the packaging of candies and snacks, etc. After special surface treatment, it can produce metalic reflective film, to package fast food and so on.
1. POE has the general characteristics of thermoplastic elastomers. The flexible chain crimp structure of octene and the crystalline ethylene chain serve as physical crosslinking points, so that it has both excellent toughness and good processability. 2. Low price and relatively small density, so low volume price; 3. Excellent heat and cold resistance, wide range of operating temperature; 4. Good weather resistance and aging resistance. Because there is no unsaturated double bond in the molecular structure of POE plastics, it has excellent aging resistance. 5. Oil resistance, compression resistance and abrasion resistance are not so good; 6. POE plastics have narrow molecular distribution, good fluidity and good compatibility with polyolefin. 7. Good fluidity not only can improve the dispersion effect of filler, but also can improve the strength of products weld mark.
LVT (Luxury Vinyl Tile) is another name for PVC sheet flooring. In 2013, Gwell successfully developed LVT floor extrusion lamination production line, and realized one-time lamination of WPC floor laminating materials, which improved production line efficiency and quality stability. It has been exported to some countries in Europe and America. Because its design and color are rich, it is popular to be used at home outfit and commercial domain. LVT extrusion production process: floor materials such as PVC plasticizer, calcium powder, mixed by high speed mixer mixing and delivered by rotating conveyor to the conical twin-screw extruder, then extuded by T die and attach the wear-resisting layer and printing layer to the product with specified thickness. Extrusion laminating process can replace the traditional rolling, laminated and complex process. It is easy to operate, has low investment cost, and can reduce the labor intensity of workers. Also it can keep workshop clean, and the production line will adopt optical sensor detection and alarm, so it has a high degree of automation.
Seaco Mould is a professional manufacturer of automotive plastic mold, processing and manufacturing. It specializes in the manufacture of various brand models of auto parts molds, automobile grille molds, automobile headlight molds, automotive rearview mirror molds, automotive fan molds, automotive instrument panel molds, automobiles Our company produces more than 20 sets of automotive molds per year, and has accumulated rich mold design, processing, manufacturing and sample delivery, specializing in automotive mold design, selection of automotive mold steel, injection design, matching selection of automotive molds, and providing OEM. And ODM customer customization services. Auto mold is an important part of auto parts mold, which requires assembly of body, headlight, grille, door panel, dashboard, central armrest, fender, etc. It requires precise mold processing, suitable depth of hook, tight fit and can be disassembled repeatedly. To facilitate the car's later maintenance services. Our automotive mold processing cycle is 60 days. The cavity is made of too long and high quality 2738/718 / P20 high quality mold steel. The core is made of domestic Shanghai / 718 / P20, which not only guarantees the quality of the mold, but also the cost of the mold to a certain extent optimize. The molding cycle of automotive molds is generally 40-60 seconds. Blessing our excellent mold cooling design scheme can effectively save the mold molding cycle and reduce costs.
Seaco Mould specializes in manufacturing various types of plastic chair molds, providing all kinds of armchair molds, stool molds, office chair molds, chair back molds, cushion molds, car seat molds, we provide plastic chair mold design and manufacturing, plastic beach Chair mold, chair stool mold price, stool mold, rattan chair mold, outdoor chair mold, our company produces more than 100 sets of plastic chair molds annually, accumulated rich chair mold design, processing, manufacturing, specialized in plastic chair mold design, plastic chair Selection of mold steel, injection molding processing, matching selection of plastic chair molds, providing customized services for OEM and ODM customers. The plastic chair mold provides an important basis for the processing and manufacture of daily necessities. The chair mold is accurately processed, well polished, and the accessories are excellent, which is convenient for the later use and maintenance of the mold. Our plastic chair mold processing cycle is 30-60 days. The cavity is made of long and high-quality 2738/718 / P20 high-quality mold steel, and the core is made of domestic Shanghai / 718 / P20. The cost of the mold is optimized. The molding cycle of the plastic chair mold is generally 40-60 seconds. With our excellent mold cooling design scheme, it can effectively save the mold molding cycle and reduce costs.
Plastic dustbin MouldPlastic dustbin Mould Taizhou Huangyan Seaco Plastic Mould Co., Ltd. is a professional manufacturer of trashcan mould. Our services include design, mold manufacturing, product injection molding processing, assembly and other subsequent processes. Core and cavity material selection: (according to customer needs), our professional advice: pre-hardened steel: P20 (1.2311), P20 + Niâetc; hard steel: H13 (1.2344) / NAK80 etc. Stainless steel: ASSAB Stavax â?¦Wait Mold base selection: (according to customer's needs), we recommend customers use Longji standard mold base, the material is S50C or P20 Core cavity hardness requirements: pre-hardened steel: HRC 30 ~ 32 + -1 * heat-treated steel: HRC 50 ~ 52 + -1 * Core demoulding: (according to product demand). Common methods: motor, cylinder, demoulding plate, thimble ... etc. Mould accessories: DME / HASCO standard parts. Surface treatment: According to product requirements, conventionally include skin texture and polishing; Mold life: (depending on material grade), ideally, 1. pre-hardened steel, minimum. 20 ~ 300,000 molds; 2. hard / heat-treated steel: 60 ~ 800,000 molds. 3. stainless steel: 1000000 molds. Runner: 1. Cold runner 2. Hot runner 3. Cold runner + hot runner Delivery time: 80 ~ 90 days Packaging: standard wooden box packaging Production: Injection production, follow-up process. Matters needing attention in plastic trash can mold design 1. The material is usually PP, the appearance is smooth polished 1500 #, and the appearance is printed by roller. 2. Because the plastic trash can is relatively deep, the product must be ejected normally during mold opening, and there must be no ejection mechanism. 3. Can adopt the style of gas cap, or the style of push plate, demoulding by the pull rod. 4. Back mold inserts usually use inserts. 5. The insert of the front mold is usually also used to facilitate polishing and processing. The production requirements of plastic trash can mold. 1. Mold assembly Mold assembly is like assembly machine. Every part and screw should not make mistakes, otherwise the consequences will be quite serious, which will lead to product defects, affect production, and completely damage the mold, resulting in scrap. 2. Hot runner or cold runner In fact, this has the least impact on the quality of the mold, because the hot runner is generally designated brand, especially for some major customers. 3. Cooling water circuit Those who have die experience know how important cooling is to a die. Due to the increase of special price and labor wage, it is unimaginable that the profit brought by not reducing the attention cycle of one second in the production of products. 4. Mold maintenance Mold maintenance is mainly in the production process of maintenance and maintenance. The mold is like a car, if it is not used for a long time without maintenance, it may lead to die scrapping.
Seaco mould is a professional and experienced box&container China, different plastic box mould maker, container mold making.Each year we make 100 container and box mold to customers. we exported to more than 20 countries per year, about box mould price, material, size,pictures,factory, contact Seaco to know more. Chair Mould Making Process Mold description: High quality plastic box&container mould Purchase order Customer offer PO to confirm the order Invoice: We send PI for payment Payment: Within 3days 50%down payment by TT Parts design 3days to modify and confirm Mold flow Before mold design moldflow to analysis injection Mold design: 5days to make mold design Confirmation: 3D mold design confirmation to start machining Order steel: 5days steel will arrive us for machining Rough machining Raw steel flying knife processing to machine Heat treatment After rough machining Hardness: 48-54HRC Lifters: Nitride with surface hardness 48HRC Fine machine: High speed CNC, three or five axis CNC Fine machining High speed engraving machining Fine machine: Fine EDM, wire cutting Assembly: 3days to assembly for test Polish: Manual high quality process Surface finish: Mirror polishing to get good appearance Other: EDM or wire cutting texture Ejection: Hardness HRC55-60, run automatic Suitable for: Injection machine Test: 50day after confirmation mould design Balance: 50% balance by TT Delivery 1-2weeks after balance and samples confirmation Transport By sea from Ningbo Port China
Techmould.co.,ltd, an ISO9001:2015 Certificated plastic injection mold manufacturer from Shenzhen China. With 20 years mold making experience.We have serviced for many auto and electrical company such as Ford,Volvo, Flex , Phillips, and also many medical companies like Kimberly in USA, Oticon in Denmark. Currently, our main facility are imported from Germany, Japan, Switzerland. Our efficient project engineers can communicate with customers in fluent English. More information about our company please feel free to contact with me.
Description of cement grouting injection pump machine: WGP350/800/70PI/E grout station is a combination of mixer, agitator and grout pump in one base frame. It is mainly used to be made bentonite slurry, cement slurry, etc, in the application highway, railway, hydropower, construction, mining and other ground and underground construction. High-speed vortex mixer ensures mix quickly and evenly. Water, cement or bentonite is quickly mixed into a homogeneous slurry. Then the mixed slurry was delivered to the agitator. Grout pump injects from the mixing drum (storage tank). This ensures a continuous mixing and grouting operations. The grouting plant is full hydraulic drive with an electric motor. Grouting pressure and displacement are step-less adjustable. Compact size and it is easy to operate. It also takes up a small space. Wode Heavy Industry Co., Ltd., short name Wodetec, is a manufacturer specialized is R&D, manufacture and sale of grout equipment. Grout Equipment includes: grout plant, grout pump, grout mixer and agitator etc. Grout equipment is specially designed for continuous cement mixing and grouting in ground and underground engineering, such as highway, railway, hydropower, construction, mining. Now we have developed full series of grout plant and grout station, pump including piston type, plunger type and hose type. Mixer volume from 200L to 800L, agitator volume from 300L to 1200L, pump flow from 0 to 200L/min and pressure from 0 to 100 bar. Electric power and diesel power are available for customization. From years of experience Wode Heavy Industry Co., Ltd. has developed its own R&D and technician teams, which supports further development and customized service for clients.
Saltwater injection machine/chicken leg saltwater injection machine will saltwater and other accessories evenly injected into the flesh, make the flesh soft, tender, shorten the pickling time, improve the taste of the product, to achieve the effect of pickling.
Material PMMA,PC,PP,PEEK,PU,PA,POM,PE,UPE,PTFE,etc. Color White,black,green,nature,blue,yellow,etc Diameter 5-1000mm,or customized Condition In stock/Made to order Shape As per your drawing Certification ISO9001,SGS,Test Report,RoSH Free Sample Available Shape Sheet, rod, tube, gear, pulley, guide rail, and so on Advantage One stop procurement Packing Plastic bags,Cartons,Wodden case,Pallet,Container,ect. Other 24 hours instant and comfortable customer service. Shipping status notification during delivery. Regular notification of new styles & hot selling styles.
Our skillful workforce combines with the strict process and quality control secures our plastic molds at high-quality level, we provide not only moulds but also technical support, speed, efficiency & quality. Tooling Technology: Multi-Cavity 2K Molds Insert molding Over-molding Babyplas Stack mold Unscrewing mold Silicon mold Metal injection mold(MIM) Gas-Assisted molding