Technological parameters: Flow rate: 0.5~ 12100 l/h. Pressure: 0.1~95 mpa. Adjustment mode: manual, electric, pneumatic, frequency conversation. Measuring accuracy: 1%. Motor power: 380v / 40w (or 60w) / 50hz (for your reference only) Fluid temperature: -45~450 Allowed particle size: 0.01 mm Viscosity of fluid: 0.3~5000 cst Head of pump: 1 Diaphragm: 1 Material: Worm wheel: tin bronze Worm: 40cr or 38crmoal Diaphragm: ptfe Pump head: pvc, cs, ss, ptfe, etc Inlet & outlet part: pvc, cs, ss, ptfe, etc Bearing: nsk japan, skf sweden Oil seal: nok japan Strong wooden box with pallet
Offer replacement /genuine for various hydraulic spare parts of pump/ motor/ excavator (etc.) for lots of brands such as rexroth, vickers, poclain, parker, caterpillar, yuken, komatsu, etc. We suggest the parts as like charge pump, cartridge kit, rotary group, piston shoe, cylinder block, valve plate, retainer plate, ball guide, drive shaft, swash plate, press pin, snap ring, back cover, saddle bearing, bearing seat, shaft seal, etc, ... Service : offer replacement, genuine. The replacement means for the required product made in china fully interchangeable with genuine, as its technique and function is same as the data of the genuine itself. The genuine is made in the original brand country, such as the brand bosch rexroth is in germany. Pls feel free to give us your specific style number. We will bring you the best product and service at most competitive rate. Sincerely hope to build up the close business relation with you on basis of the mutual benefit in a long term. Thank you. Box
Offer replacement /genuine for various hydraulic spare parts of pump/ motor/ excavator (etc.) for lots of brands such as rexroth, vickers, poclain, parker, caterpillar, yuken, komatsu, etc. We suggest the parts as like charge pump, cartridge kit, rotary group, piston shoe, cylinder block, valve plate, retainer plate, ball guide, drive shaft, swash plate, press pin, snap ring, back cover, saddle bearing, bearing seat, shaft seal, etc, ... Service : offer replacement, genuine. The replacement means for the required product made in china fully interchangeable with genuine, as its technique and function is same as the data of the genuine itself. The genuine is made in the original brand country, such as the brand bosch rexroth is in germany. Pls feel free to give us your specific style number. We will bring you the best product and service at most competitive rate. Sincerely hope to build up the close business relation with you on basis of the mutual benefit in a long term. Thank you. Packed with wooden box
High pressure pump.
Designed to be interchangeable with a warman ah 4/3 slurry pump. Fh series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo
Designed to be interchangeable with a Warman AH 6/4 Slurry Pump. FH Series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo.
Specification : •Size range (discharge) 1” to 18” 25 mm to 450 mm •Capacities to 22,000 gpm to 5,000 m3/hr •Heads to 240 ft to 73 m •Pressures to 300 psi to 2,020 kPa. Size: 1"-16" Weight: 77-18864 Dimension:1cube-12cube.
Size range (discharge) 1¡± to 18¡± 25 mm to 450 mm Capacities: to 22,000 gpm to 5,000 m3/hr Heads: to 240 ft to 73 m Pressures: to 300 PSI to 2,020 kPa. Size: inlet : 1.5¡±-18¡± outlet:1¡±-16¡± Weight: 77kg-18864kg Dimension : 0.2cube-16cube.
Specification : •Size range (discharge) 1” to 18” 25 mm to 450 mm •Capacities to 22,000 gpm to 5,000 m3/hr •Heads to 240 ft to 73 m •Pressures to 300 psi to 2,020 kPa. Size: inlet : 1.5”-18” outlet:1”-16” Weight:77kg-18864kg Dimension: 0.2cube-16cube.
Submersible borehole pump (deep well water pump) Material is cast iron and stainless steel, tin bronze. They are important equipment for deep well water-lifting. Used to lifting water and drainage farmland irrigation, water supply projects, etc. It is also used sea water. Products include 6 large series and over 800 sizes. Size: 6 inch ~12 inch Flow rate: 5~600m3/h Lift: 6~600m Power 3~250kw. Wooden case.
The products are important water-lifting equipments in projects of geothermal development and utilization. They are heat-resistant, anti-corrosion and aging-resistant. Its operating water temperature is 120¡æ, and has passed national ministerial level certification. The case of the electric heat-resistant submersible motor is made from stainless steel and the tin bronze materials. Products include 6 large series and over 800 sizes. Geothermal submersible borehole electric pump honorably wins the prize of scientific and technological innovation. China important new products certificate Size: 6 inch ~12 inch Flow rate: 5~600m3/h Lift: 6~600m Power 3~250kw. Wooden case.
Voltage: AC 220-240V/50Hz,220V/60Hz,120V/60Hz; Head: 1Meter Flow Rate: 20L/MIN Duty Type: Continuous. 27 sets/carton.
With short gaps in the both ends of support, XS type pump works stably with less noise and vibration. It can be risen speed operation to meet wider usage. Being inlet and outlet located in the same center line, the pipelines arrangement looks simple and beautiful. The rotor can be operated in reverse direction to avoid damage to the pumps from water hammer. Unique design of high temperature, using middle support, thickening pump casing, seal cooling and oil lubrication bearing make XS type pump suitable for working at 200, especially for heat supply newtwork requirements. XS type pump case body can be vertically or horizontally installation acoording to different working condition, with mechanical seals or packing seals. Wtih industrial designs to the shape of XS type pump, the line of pump is clear and beautiful to in line with modern aesthetics. Cost advantage: 1. Using the advanced hydraulic model, the efficiency of XS pump is 2%~3% higher than the same type pumps. The operating cost minimum. 2. The vacuum height of XS type pump is risen 1-3 meter to reduce land construction investment and to extend the service life. 3. Using inport brand bearing, such as SKF, NSK and using various pump material make XS type pump suitable for any site working condition and minimize the maintenance cost. Maintenance advantage: 1. With container type mechanical seal, the mechanical seal of pump is very easy and simple to replace. 2. With elastic ripess assembling, the rotor parts is easy and rapid to assembly and disassembly. 3. It is unnecessary to make adjustment to any gap when assembling.
Features: 1. New-pattern, air-cooled, 4-stroke gasoline engine powered 2. High strength die-cast aluminium alloy pump body 3. Compact structure, light weight for easy transportation 4. Security operation and easy maintenance. We can maufacture the goods by your special demand The color of goods looks can be choosed by the customers.
Product Overview: DP Pump is a self Cbalancing multilevel boiler feed pump with single-suction, multievel and sectional structure. This series of pumps are suitbalbe for medium and low pressure boiler water feeding, and high-pressure boiler water feeding for thermal power plant, as well as high-lift water supply and drainage of factories and cities. They are used in transferring water or other liquid with similar physical and chemical properties to water. Temperature of media being transferred can vary from -20~160 Efficient energy-saving: Using advanced hydraulic model, independent R&D energy efficient products. Good centering of impeller and guid vane channel and efficiency will not significantly drop as balancing disc wears and rotor components move forward. No leakage of balancing water reduces loss of volume and improves pump efficincy and pump efficiency is on average 2-5% higher than normal DG pump. New structure: With symmetrically arranged impeller rotor components, axial forces generated by all levels of symmetrical impellers forces offset each other and automatic balancing of huge axial thrust within pump cavity can be realized without the balcancing disc structure. New technology: Unique throttling and pressure reduction devices, odd-lecel balancing device. High reliability: By canceling easy-failing balancing disc, pump reliability is greatly improved, maintenance frequency and maintenance cost are reduced. Low maintenance cost and long life time By adopting precision casting and unique throttling and pressure reducing devices for auxiliary support, pump vibration and noise are greatly reduced and service life is prolonged.
Technical parameters: BT100L Flow range(mL/min): 0.00016-570 Speed range(rpm): 0.1-150: Speed resolution(rpm): 0.1rpm Flow accuracy:
Road Project Rig:Apply to be using on open and no power site, such as the Plaza, Highway, workshops and other large-scale drilling operations on the ground, not fixed, mobile convenience, continuous work.Maximal Hole to 400mm Vertical Rig: Easy to use, light weight, big horsepower, high-speed, short-time overload of work, applicable to the most moving working condition for every size holes. Hand Rig:Flexible and applicable to the various locations of the drilling operations. Such as decoration, household appliances installation, plumbing etc. Provides many kinds of international, advanced brand slurry pumps, SeriesAH, ZGB, ZJ Our experts will be your reliable consulters to give consultive suggestions and precise selection on performance parameter, construction, materials, etc. It can let the slurry pumps from us have a better service for industries of mining, metallurgy, coal preparation plant, ash-handling at power plant, etc.
Pump and parts.
Benefits: Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance. Wooden case with plastic inner packing.
Metslurry high head slurry pumps have been specifically designed to combat the need to run conventional design slurry pumps at excessive speeds to generate high heads often required in many modern slurry pumping applications. Wooden case with plastic inner packing.
