Sh/100D Slurry Pump

Specification : •Size range (discharge) 1” to 18” 25 mm to 450 mm •Capacities to 22,000 gpm to 5,000 m3/hr •Heads to 240 ft to 73 m •Pressures to 300 psi to 2,020 kPa. Size: 1"-16" Weight: 77-18864 Dimension:1cube-12cube.

Size range (discharge) 1¡± to 18¡± 25 mm to 450 mm Capacities: to 22,000 gpm to 5,000 m3/hr Heads: to 240 ft to 73 m Pressures: to 300 PSI to 2,020 kPa. Size: inlet : 1.5¡±-18¡± outlet:1¡±-16¡± Weight: 77kg-18864kg Dimension : 0.2cube-16cube.

Horizontal Slurry Pumps, Metal Lined Slurry Pumps, Heavy Duty Slurry Pumps Model: SH/100D, SH/150E, SH/200F Series: Metal Lined Slurry Pumps General Introduction: Our horizontal slurry pumps are designed for heavy-duty applications such as mining, minerals processing, mill discharge, power plants, tailings, and other industrial applications, for maximum abrasion, erosion, and corrosion resistance. The pumps are in a wide range of sizes, available with both high chrome and ruber wearing parts. Components like impeller and volute come in a range of hard metal types and elastomer to suit the specific application. Different shaft seal types are available to suit every requirement, including gland packing seal, expeller seal and mechanical seal. Our metal lined slurry pumps are designed for heavy duty industrial applications, to handle the most arduous slurries.  Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures. Applications: Heavy-duty slurry pumping applications, Mining and minerals processing, Mine refuse and tailings, Mill discharge, Cyclone feed, Sand and aggregates Driven Type: DC(z): The pump and the engine is directly connected by a coupling. Belt-driven Types: The pump and the engine is connected by pulleys and belts --- CV, CR(z), ZV(z).

Suit for 50% hardenite dirty water,mud slurry; such as building operation, emergency road repair exhaust and so on; also could use as clean water pump.

Slurry pumps are designed to handle liquids containing abrasive and coarse grained solids. It has a heavy duty design with a single stage axial inlet. It is also suitable for sand water mixtures and other related slurry

They are generally used for slurries containing high concentrations of erosive solids or where an Extremely heavy duty pump is required. Aojin pumps are available both metal and rubber lined corrosion and abrasion resistant materials. Discharge diameters -

We manufacture slurry pumps for various slurries in cement and concrete industry as well as other slurries across industries like pulp, clay and oil. Our slurry pumps are designed for sturdy operation with heavy duty cycles. Our pumps are precision manufactured to provide measured output or a continuous output as required. We provide two types of slurry pumps - peristaltic pumps and screw pumps, both used for positive flow of slurries. Please contact us with your requirements for further information on suitability and productivity.

Designed to be interchangeable with a warman ah 4/3 slurry pump. Fh series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo

Benefits: Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.  Wooden case with plastic inner packing.