LJ-HGM Sliding Rail Wear Measuring Gauge Sliding rail wear measuring gauge is used to measure the rail profile vertical wear and side cut value and switch rail decent value. It is Digital display reading, The reasonable design makes it light ,easy to operate and intuitive in reading.
The Rail Wear gauge block is used for calibrating and measuring the Zero error and uncertainty of the railwear gauge . It can be customized according to rail type It is made up of the base , Standard reference block and deputy blocks.
YD-22III Automatic hydraulic Tamping Machine for track maintenance work YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries.This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation
The switch rail lateral wear gauge is used to measure the switch rail lateral wear and descent height value of the switch rail ,it can be used for all the type of switch rail.
Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value.
Mechanical Rail Wear Gauge is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it convenient operation and intuitive reading.
Switch Rail Height Gauge is mainly used to measure the descent height value of the switch rail relative to the basic rail and point rail relative to the wing rail . This instrument has the features of high measuring precision, convenient calibration, simple structure, light weight and easy to carry. Reasonable switch rail height can not only ensure train running safely and smoothly, but also reduce the interaction between wheel and rail effectively,reduce the dynamic stress of track structure, keep the track in good geometric state, thus reduce the maintenance workload.
Switch Rail Height Gauge is mainly used to measure the descent height value of the switch rail relative to the basic rail and point rail relative to the wing rail . This instrument has the features of high measuring precision, convenient calibration, simple structure, light weight and easy to carry. Reasonable switch rail height can not only ensure train running safely and smoothly, but also reduce the interaction between wheel and rail effectively,reduce the dynamic stress of track structure, keep the track in good geometric state, thus reduce the maintenance workload.
Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading.
Digital Rail Frog Wear Gauge is used to measure vertical wear value of frog point rail and wing rail at any sections.Also could be used for measuring decrease value of point rail relative to wing rail.
Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation. It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and operate.Light weight structure is convenient to carry.
Barrel Blasting Machines Barrel blast shot blasting machines, also sometimes referred to as tumble blast machines or vibratory finishing machines, are another type of industrial machine used for cleaning and surface treatment of parts. They work by tumbling workpieces inside a rotating barrel chamber along with an abrasive media. Specification of Barrel Blasting Machines Type BBM1500 Productivity(t/h) 6 Max. weight of single workpiece (kg) 40 Max. length of single piece(mm) 500 Diameter of drum(mm) �?1500 Effective volume(m�³) 0.6 Number of blast wheel 1 Blast wheel power(kW) 30 Max. Loading capacity(kg) 1500 How Does Barrel Blasting Machines Work? Rotating Barrel Chamber: The core component is a cylindrical barrel chamber that rotates on a horizontal axis. This tumbling motion throws the parts against each other and the abrasive media, creating a cleaning and finishing action. Abrasive Media: The chamber is filled with an abrasive media, which can be steel shot, ceramic grit, or even organic media like walnut shells depending on the desired cleaning or finishing effect. Compound (Optional): In some cases, a liquid compound can be added to the blasting media to enhance the cleaning process or achieve a specific surface finish.
A crawler type shot blast cleaning machine, also known as a tumble belt shot blasting machine or rubber belt shot blasting machine, is designed for the efficient and uniform surface treatment of bulk quantities of small to medium-sized workpieces. This type of machine is particularly well-suited for removing rust, scale, sand, and burrs from various parts; preparing surfaces for painting, coating, or plating; and even shot peening to increase fatigue strength. It is commonly used in industries such as foundry, forging, automotive, and metal manufacturing. Tumblast Machine & Barrel Blasting Machines Types Tumble Belt Shot Blasting Machine Barrel Blasting Machines Benefits of Crawler Shot Blasting Machines Efficient Cleaning of Large Workpieces: They are ideal for blasting large, heavy, or oddly shaped parts that wouldn't fit well in traditional blasting cabinets. The continuous movement on the crawler track ensures all surfaces are exposed to the abrasive media for uniform cleaning. Improved Productivity: The continuous processing nature of these machines allows for faster blasting of large workpieces compared to manual methods or using smaller blasting cabinets. Reduced Labor Costs: Automating the blasting process with a crawler machine minimizes reliance on manual labor for handling heavy pieces, potentially lowering overall production costs. Versatility: Some shot blasting machine crawler type offer adjustable track speeds and blast intensity settings to accommodate a variety of workpiece sizes and cleaning requirements. Function of Crawler Shot Blasting Machine Industrial Sandblasting Equipment Continuous Blasting: Unlike blast cabinets where blasting stops for loading/unloading, crawler shot blasting machines offer a more continuous process. Workpieces are placed on a caterpillar track (hence the name "crawler") that moves them steadily through the blasting chamber. This allows for efficient processing of large or heavy pieces. Multiple Blast Wheels: Strategically positioned blast wheels within the chamber bombard the workpieces with abrasive media as they travel on the crawler track. This ensures thorough cleaning of all surfaces, even on complex-shaped objects. Durable Construction: These machines are built to handle the weight and potential impact of large workpieces. They typically feature robust construction materials and heavy-duty components for reliable operation in demanding environments.
Crane rail pad MK2 Crane rail pad is located between a rail and the steel soleplate which improves the performance of crane rails.Cranes apply high forces to the structures on which they are mounted.The MK5 pad significantly reduces the stress between the rail and its support. The CRANE pad is one of the three key ingredients in achieving a reliable track. Rail pad should be narrower than the rail it is supporting (nominally 5mm). The pad is normally supplied in 12 meter lengths. The flutes of the pad are placed facing upwards. The pad may be cut to precise length of rail. It can be cut with a hacksaw or jigsaw. No installed length of pad should be less than the spacing between three pairs of crane rail fixing clips. Before installing Mark 2 pad, the supporting area should be clean and free of oil, grease or any projections likely to damage the pad. It is preferable that the steel structure below the pad is not painted. If the rail is to be welded the pad should be protected from excessive heat during welding by being removed under the weld or by being protected with a thermal barrier. Our technical department will be pleased to advise on the suitability of Mark 2 pad in specific installation conditions.
Crane Rail Clip Sets Crane rail clip is a welded and adjustable crane rail clip assembly which is designed to fix to heavy rails in the most arduous applications. Its material is forged Q235 or Q345 steel. Each clip has one sets of M16 high strength bolts (8.8 grade). It is designed to withstand a 120 KN (12.2 tonnes) horizontal force from the rail, and the horizontal adjustment is 20 mm.
Specification Model LJ-ZJC-30 Type L Square Ruler Material Stainless Steel Dimensions (L x W x H) (mm) 300*130mm Scale 1mm Length 300 mm
BOSOKO Front Flat Wiper Blades Front flat wiper blades are a type of windshield wiper blade designed to keep your windshield crystal clear in any condition. They are attached to the vehicle's windshield using a rubber strip that allows them to move back and forth while wiping away rain, snow, and other debris. The flat design of the wholesale flat type wiper blades helps it to conform to the windshield better than traditional wiper blades, creating a more consistent and effective wipe. These wholesale universal flat wiper blades are made of durable materials and are designed to last much longer than traditional blades. They are also much easier to replace than other types of wiper blades, as they snap on and off quickly and easily. Bosoko China flat windscreen wiper blades factory is an excellent choice for any vehicle, as Bosoko flat type front wiper blades provide superior performance, are easy to install and maintain, and last longer than other wiper blades. Buy from China Flat Wiper Blades Factory-Bosoko When it comes to top-quality windshield wiper blades, Bosoko, as a leading flat wiper blades factory in China, offers an impressive range of premium products. Our selection includes the Front Flat Wiper Blades Premium Series with Double Spring, Sport Series with PE Refill Holders, and classic car windscreen wipers, providing options to suit diverse needs. The Bosoko S986 Front Flat Wiper Blades with Double Spring Steels, S704A Front Flat Wiper Blades with PE Refill Holders, and S981 Front Flat Wiper Blades with End Caps are just a few examples of our high-performance wiper blades. As a trusted manufacturer and supplier of OEM windshield wiper blades, Bosoko sets the standard with our exceptional products. If you're searching for a China flat beam wiper blades factory or manufacturer, look no further Bosoko's commitment to quality and innovation ensures that we deliver wholesale frame wiper blades and universal flat wiper blades that meet the highest standards. Explore our range and experience the superior performance and reliability of our flat windshield wiper blades for yourself.
Bosoko T550 Front Frame Wiper Blades with J-hook Adapters High-Quality Materials: The T550 Front Frame Wiper Blades are constructed with a main frame made of cold-rolled steel coated for durability, ensuring long-lasting performance. Universal Adapter: Equipped with j hook windshield wipers made of PBT material with 15% fiber, these wiper blades can easily fit onto various types of wiper arms, providing a hassle-free installation process. Enhanced Durability: The main frame and rivets of the T550 wiper blades are made of cold-rolled steel coated with powder coating, offering excellent resistance against rust and corrosion, and ensuring a longer lifespan. Superior Wiping Performance: The refill of these wiper blades is made of natural rubber for optimal wiping performance. The graphite-coated rivets and power-coated iron construction further enhance the smooth and streak-free wiping action, providing clear visibility during inclement weather conditions. Contact Bosoko wholesale frame wiper blades for OEM prices. If you are looking for a reliable wiper blade manufacturer, don't hesitate to contact us!
Easy Installation: The wipers rain shield flat Premium Series with Double Spring Steels comes with more than 15 adapters made of POM material. These adapters ensure easy and hassle-free installation on various car models, allowing customers to quickly replace their old wiper blades without the need for additional tools or modifications. Enhanced Durability: The adapter base of these wiper blades is made of durable metal, providing a sturdy and reliable connection between the blades and the wiper arms. This ensures that the blades remain securely in place and can withstand the rigors of daily use, including harsh weather conditions and high-speed driving. Improved Visibility: The spoiler of these wiper blades, made from TPR material, is designed with a side spoiler. This design improves the aerodynamics of the blades, reducing drag and lifting at high speeds. As a result, the wiper blades maintain optimal contact with the windshield, providing clear visibility and effectively wiping away rain, snow, and debris. Longevity: SK5 high carbon steel offers exceptional strength and resilience, ensuring that the spring maintains its elasticity even after prolonged use. Additionally, the 304 stainless steel strips inserted in the refill enhance durability and prevent deformation, prolonging the lifespan of the wiper blades.
Bosoko custom windshield wiper blades are a great choice for any car owner looking for a long-lasting, reliable, and efficient car cleaning wiper and rain windshield wipers. Bosoko OEM windshield wiper blades are designed to provide maximum performance and durability for all types of weather conditions. Bosoko car cleaning wiper and rain windshield wipers are made from high-quality rubber and metal components that make them incredibly durable and resistant to the harsh environmental conditions that car windscreen wiper blades endure. The design of the custom windshield wipers ensures that they provide a smooth and quiet wiping action, while Bosoko bulk wiper blades also providing a clear view of the road ahead. Additionally, Bosoko car cleaning wiper and rain windshield wipers are easy to install and maintain, making them an ideal choice for any driver. Bosoko bulk wiper blades wholesale come in a variety of sizes and styles to fit any car model, making them a great choice for any driver looking to upgrade their wiper blades. Such as, hybrid wiper blade, flat beam wiper blades, wholesale frame wiper blades, front snow wiper blades, front exclusive wiper blades, and rear wiper blades. With their superior performance, durability, and ease of installation, Bosoko bulk windshield wipers wholesale are a great choice for any car. Buy Custom Windshield Wipers Blades from Bosoko When it comes to caring for your vehicle, having reliable OEM wholesale windshield wipers is essential. Bosoko custom windshield wipers supplier has you covered with top-quality products. Whether you're looking for rain windshield wipers, custom windshield wiper blades, OEM windshield wipers, or other car cleaning wiper solutions, Bosoko has you covered with top-quality products. Bosoko manufactures a diverse selection of front and rear windshield wiper blades to suit different vehicle models and driver preferences. Bosoko OEM windshield wiper blades lineup includes flat beam wiper blades, front hybrid wiper blades, wholesale frame wiper blades, front snow wiper blades, front exclusive wiper blades, and rear wiper blades. This extensive range ensures that customers can find the perfect windshield wiper blades to match their specific requirements.
