CGLHJ series of Electrical conveyor belt vulcanizer are specialized equipments for curing joints of belts of conveyer machines. The machine is made of light aluminum alloy materials, and with small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .Ití»s reliable and convenient to operate. At the same time, it has the merit of fast warming, uniform temperature, high thermal efficiency, etc. It is a kind of ideal adhesive joint equipment mechanical rubber conveyor belt. The quality of the belt connection will influence the working efficiency and service life of belts directly, especially for the long distance and high-strength conveyer belts. Therefore, CGLHJ vulcanizer is the necessary assistant equipment of belt conveyer. Purposesú¦ The device is widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc. Technical parametersú¦ 1. Vulcanization pressure: 1.0-2.0mpa; 2. vulcanization temperature: 145 íµ; 3. Difference in surface temperature of vulcanized plate: í+ 5 íµ; 4. Calefactive time (at normal temperature to 145 íµ) :¿Q30 min; 5. Power supply voltage: 380 v. 50Hz; 6. Output power of Electronic Control Box: 36 Kw; 7. Temperature adjustment range: 0 to 200 íµ; 8. Timing adjustment range: 0 to 99 min; 9. After the pressurization of 0.8 MPa, the gap between upper and lower heating plate is not more than 0.4 mm
CGLHJ Series of Electrical water cooling belt Curing Machine own small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .Its reliable and convenient to operate. Presently the devices are widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc. The device can cool heating plates quickly through water as long as there is ordinary water supply at the scene after vulcanization. It Can greatly improve efficiency and enhance the quality of belt joints, generally cooling from the curing temperature to 60 íµ, 10 minutes, cooling water pressure í¦ 0.2 mpa. Water cooling belt Curing Machine, of lightweight, can be moved by manpower easily. Please consider the facility of electricity and water before installation. Please put through the water sources with upper and lower heating plate, cooling water pipe by specialized water pipe, but not to discharge water for the time being. Then begin to maintain constant temperature until finish vulcanization, then open water supply at this time instill water into hot plates. When the temperature drops to preset technical value, discharging water and disassembling equipments are allowed, and the vulcanization is finished. Purposesú¦ The device is widely used in the fields of metallurgy, chemical industry, metal mine, power plant, harbor and wharf where use the device to contact the belt joints. If users carry out vulcanization technics according to referred parameters, the pull intensity of the belt can be 90% comparing with the original one, not only the belt joints are smooth, but ití»s almost the same with the original belt, and meanwhile it will weaken the abrasion to rollers, furthermore it can prolong the service life of conveyor and conveyor belt.
No.1 Introduction: Aiming at solving the defects of the traditional steeliness rollers, such as when encountered acid, alkali and salt, they are easy to get corrosive, sticky, abrade, and due to getting stuck of the axletree, the belt is easy to lacerate as well as their short service life, etc. Our company has succeeded in developing wear-resistant ceramic rollers. After the terminal operating results in iron and steel, chemical, fertilizer, mining, power plant, salt works and shipside industries show that the products are not only of wear and acid and alkali salt resistance , anti-oxidation, operation stability, security features, but also can effectively prevent the belt deviation, reduce partial loss of belt, prolong its service life, reduce the manpower, material resources and time caused by replacing rollers frequently, lower operating costs and improve the efficiency of belt conveyor. As operating under harsh environment in the open air, their service life is 3-5 times longer than the traditional one. No.2 product advantages: 1. Corrosion resistance. 2. Strong hardness and abrasion resistance. 3. Entire hermetic sealing. 4. On the Ceramic surface forms a layer of oxide film, it doesní»t have any binding or response to any substance. 5. 2-5 times longer service life than steeliness roller, furthermore it can reduce belt abrasion and prolong service life of belts. 6. Cost-effective, it can reduce the integrated costs of the belt conveyor and repairing. No.3 Data Sheet of Chemical Composition: Component Sio2 Al2o3 Mgo Fe2o3 Cao Na2o Other Content 51-54% 45-48% 0.4% 0.25% 0.15% 0.1% Tiny No.4 Technical Parameters: Compressive strength: 145 Mpa Flexural strength: 80 ~ 120 Mpa Hardness (Mohsí»s) :> 7 Adaptable Temperature: -80 to 180 íp C Water absorption:
Working area:740*1120mm Travel of engraving:600*900mm Power of main spindle:2.2kw Maximum speed:10m/min Maximum carve speed:7m/min Maximum feed-in height:200mm Work mode:stepper Voltage:ac220v/50hz Command:g code*.U00*mmg
Working area:1410*1420mm Travel of engraving:1200*1200mm Power of main spindle:2.2kw Maximum speed:10m/min Maximum carve speed:7m/min Maximum feed-in height:200mm Work mode:stepper Voltage:AC220V/50Hz Command:G code*.u00*mmg
Gross weight 485kg Electric motor power4.0kw Work voltage380v 50hz Output rotate speed of reducer41 r.P.M Wooden case Weight 500tons Dimension1000 w485 w1000mm
Shibang Ball Mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc.These mill has two ways of grinding: the dry process and the wet process.
Shibang Sand Washing Machine is a kind of water washing style mining equipment to be matched with the sand making machine such as jaw crusher, impact crusher etc, and can reduce the dust and stone powder which mixes with the final sand, so sand washing machine can improve the quality of the sand. XSD series Sand washing machine is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factoryí»s quartz sand and refilling pressure sand. You could used it with the Sand Making Flow.
Shibang conveyors consist of standard parts, which are advanced and simple in structure, easy to maintain. Our vibrating equipment is adaptable for stationary and mobile crushing plants. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump materials, or packaged materials. According to different transferring equipment, the transfer system can be one independently or multi-conveyors or combined with other transfer equipments. The belt conveyor can be installed horizontally or aslope to meet the needs of different transfer lines.
SHIBANG Raymond Millgrinder produced by our company is mainly used to grind non-inflammable and non-explosive materials with Mohí»s hardness below 7 and moisture content below 6% such as barite, calcite, potash feldspar, talcum, marble, limestone, ceramic, glass, etc Raymond grinder can be used in mining, chemical industry, construction materials, metallurgy and so on. The final products can be adjusted freely from 100 mesh to 425 mesh. Firstly, raw material is crushed by jaw crusher to the size required, then elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between the ring and rollers to accomplish the grinding.After grinding, the rough materials will be recycled by the air from the fan back into the grinding chamber for re-grinding and the fine powders are blew into the cyclone and poured out through the output-powder pipe as the final materials.
Shibang Straight Centrifugal Grinder Mill is mainly used for grinding mixed materials. The machine is on purpose to grind mining materials in the fields of metallurgy, building materials, chemistry, mining and so on. It can grind the non-flammable and non-explosive mineral materials with the Mohí»s hardness lower that scale 9.5. When the mill working the motor drives the rollers suspension frame through flywheel and central shaft, and the rollers will rotate around the ring with the rollers suspension frame. After entering the hopper, the materials fall down to the rings, during this process, they are grinded by the rollers into powders or fine grains, and at last are discharged by the outlet.
Fridge cabinet foaming machine Generally speaking, the line introduces linear confirguation with non-freon design and the hardening position as six-position. The line is composed with six units of cabinet-foaming fixture, a set of injecting manipulator, a set of both-way carrying car for loading & unloading cabinet, a set of water-heating system, a set of safety exhausting system, a set of safety system, a set of safety fencing together with electronic controlled system for the line.(Note: the safety fencing is built by buyer with the drawing and technical requirement giving by seller, all the equipments doesn¿¬»t include molds) This foaming line is designed only for refrigerator not for freezer. Because of the freezer inner is aluminium plate, and that refrigerator inner is ABS. The foaming mold of freezer is expand mold, and that the foaming mold of refrigerator is fixed mold. The expanding mold and jig outside should be make for freezer foaming in addition. The line comprises several processes including loading, transporting, clumping, injecting, hardening, cabinet-unloading with characteristics of beautiful appearance, high production efficiency, low labour intensity and etc.. The main technical performance parameters refrigerator euipments, refrigeration production line, fridge cabinet and door foaming machine, foaming, jigs, fixtures,clamps,dies,thermo forming machine,side panel or profile board roller forming line, paining line for metal parts, moulds, refrigeration, chest freezer, built-in cooler freezer, injection machine, high pressure injection head, conveyor for assembling line, washing machine, refrigerant, compressor,leakage inspection machine fridge door shell forming machine, refrigerator door body producing equipment, chest freezer door forming machine, bending, refrigerator, build-in refrigeration, cooler, punching, die and moulds, fridge side panel or profile board rooler forming machine, refrigerator side or profile panel producing equipment, chest freezer side board roller forming machine, bending, roller forming, refrigerator, build-in refrigeration, cooler, punching, die and moulds, refrigerator produing euipments, fridge fabricating machine,refrigerator production line, foaming machine for foaming jig fixture clamp die, thermo forming machine, roller forming machine, mould and plug, assembling line, bending forming punching notching cutting machine refrigerator producing equipment, detailed as follows: 1. refrigerator metal parts processing equipments: refrigerator door sheet bending forming machine; fridge side panel roller forming machine line; fridge back board roller forming machine line; 2. foaming euipments: refrigerator door body 7 jigs revolving foaming line. fridge cabinet fixtures linear layout foaming line. foaming line for door and cabinet with trolleys circling moving on the ground railway. door foaming machine moving by flat circling jigs. 3. thermo forming machine for inner liner single work station thermo forming machine multi-stations thermo forming machine for refrigerator door and cabinet inner liner double station thermoforming machine. 4. refrigerator production line including all kinds conveyor like roller, flank and chain etc, mainly including following parts: refrigerator preassembling line, assembling line, compressor weilding line, injection line, cooling performance inspection line and packaging line etc, in addition, the layout can be designed accoring to customer's requirement. 5. thermoforming moulds and foaming jigs&fixtures. thermo forming moulds for door and cabient. foaming fixtures and jigs for door and canbinet. refrigerator thermoforming machine, fridge roller forming machine,fridge case foaming machine, refrigerator producing machine,refrigerator production line,fridge door shell bending forming machine ABS&HIPS sheetú¼PU foaming, cyclopentane, refrigerator producing,refrigerator making,refrigerator fabricating,refrigerator machine,fridge machinery,refrigerator production line,thermoforming machine,roller forming machine,foaming machine,fridge processing machine,refrigerator making plant refrigerator foaming machine, refrigerator machine, refrigerator making equipment,fridge producing machine,refrigerator roller forming machine,thermo forming machine,refrigerator production line,refrigerator fabricating equipment,refrigerator manufacture, Refrigerator producing machine, refrigerator machinery, fridge machine, thermo forming machine, ABS&HIPS sheet, refrigerator thermo forming mould,vacuum thermo forming,refrigerator vacuum mould,refrigerator inner liner,case inner liner,door inner liner, refrigerator making,refrigerator fabricating, refrigerator producing, refrigerator manufacturing, refrigerator production line, refrigerator, refrigerator foaming machine, fridge foaming line, refrigerator case foaming line, refrigerator production line, refrigerator machine, refrigerator machinery,foaming fixture,foaming jig,foaming mould and die,pu foaming, high pressure foaming machine, cyclopentane, non freon foamng, POL+ISO,foaming clamp, foaming closure height,refrigerator producing machine, refrigerator manufacturing device, non standard machine with customer order
Sbm vibrating feeder
SBM Vibrating Screen
Sbm jaw crusher Widely used in stone mining, metall-urgical industry, building material, highway, railway, and chemical industry.
Jk-40y cnc engraving machine The machine base is made of castings with good rigidity and stability. Precision linear rectangular guides are used. It is pre-tightened and with good rigidity and accuracy. Ball screws are grounded with the accuracy of high degree and pre-tightened. The interface is of international standard g codes and compatible with domestic or foreign software. It is easy to use and suitable mainly for stamp. Model:jk-40y Table size: 480*380mm Working stroke of x, y, z: 400*300*80mm Positioning accuracy of x, y, z: 0.015/300mm Repositioning accuracy of x, y, z: 0.015mm Evenness of worktable: 0.025/300mm Verticality of x, y: 0.025/300mm Spatial height in z direction: 160mm Spindle power: 800w Spindle speed: 5000-24000rpm Driving system: stepped Working voltage: single phase 220v 50hz Weight of machine tool: 250kg Dimension: 780*620*1400mm Wooden package. 800x800x1600mm
1.Make features of big taper, considerable thickness, high efficiency, high precision and new structure etc, lead this industry; 2.There are computer, machine electric and pulse power supply all in the controller; 3.Main computer has two kinds of typesí¬single board computer and microcomputer; 4.Double CPUs structure in microcomputer, program and control at the same time; 5.Good rigidity, running placidly, strong function, convenient and reliable operation; 6.The whole closed machine bed, working table with T shaped groove, pane fixture; 7. Suitable to process conductive metal moulds, complex metal parts and templates with high precision, high toughness and difficult processing; 8.Can cut plane, bevel, top and bottom different shaped surface, greatly expand the processing range; 9.According to usersí» request, add half closed-loop, transducer control system. Package dimensions(Lí-Wí-H) mm 1800í-1400í-1800
The machine base is made of castings with good rigidity and stability. Precision linear rectangular guides are used. It is pre-tightened and with good rigidity and accuracy. Ball screws are grounded with the accuracy of high degree and pre-tightened. The interface is of international standard G codes and compatible with domestic or foreign software. It is easy to use and suitable mainly for high frequency moulding, drop moulding and mini moulding industry and their relevant industries. Model:JK-50M Table Size: 630*530mm Working Stroke of X, Y, Z: 500*400*110mm Positioning Accuracy of X, Y, Z: í+0.005/300mm Repositioning Accuracy of X, Y,Z: í+0.01mm Evenness of Worktable: í+0.025/300mm Verticality of X, Y: 0.025/300mm Spatial Height in Z Direction: 300mm Spindle Power: 2.2kw Spindle Speed: 5000-24000rpm Driving System: Servo Working Voltage: Single Phase 220V Three Phase 380V/50Hz í+10% (optional) Weight of Machine Tool: 1000kg Dimension: 1150*1080*1500mm 1300X1300X1800 mm
JK-40M Table Size: 480*380mm Working Stroke of X, Y, Z: 400*300*90mm Positioning Accuracy of X, Y, Z: í+0.01/300mm Repositioning Accuracy of X, Y,Z: í+0.01mm Evenness of Worktable: í+0.025/300mm Verticality of X, Y: 0.025/300mm Spatial Height in Z Direction: 200mm Spindle Power: 800w Spindle Speed: 5000-24000rpm Driving System: Servo Working Voltage: Single Phase 220V Weight of Machine Tool: 700kg Dimension: 800*780*1450mm WOODEN PACKAGE 1200X1200X1600 mm
Cnc engraving machine-jk-40j-d JK-40M Table Size: 480*380mm Working Stroke of X, Y, Z: 400*300*90mm Positioning Accuracy of X, Y, Z: í+0.01/300mm Repositioning Accuracy of X, Y,Z: í+0.01mm Evenness of Worktable: í+0.025/300mm Verticality of X, Y: 0.025/300mm Spatial Height in Z Direction: 200mm Spindle Power: 200w Spindle Speed: 1000-2500rpm Driving System: Stepped Working Voltage: Single Phase 220V Weight of Machine Tool: 700kg Dimension: 800*780*1450mm wooden package. 1000x1000x1600MM
