SHIBANG Raymond Millgrinder produced by our company is mainly used to grind non-inflammable and non-explosive materials with Mohí»s hardness below 7 and moisture content below 6% such as barite, calcite, potash feldspar, talcum, marble, limestone, ceramic, glass, etc Raymond grinder can be used in mining, chemical industry, construction materials, metallurgy and so on. The final products can be adjusted freely from 100 mesh to 425 mesh.
Firstly, raw material is crushed by jaw crusher to the size required, then elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between the ring and rollers to accomplish the grinding.After grinding, the rough materials will be recycled by the air from the fan back into the grinding chamber for re-grinding and the fine powders are blew into the cyclone and poured out through the output-powder pipe as the final materials.
Features: Three-dimensional structure Land-saving The screen-passing rate can reach to 99% The transmission is steady and reliable; The transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Raymond roller mill 3r2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t Raymond roller mill 4r3216 Number of roller: 4 Diameter of roller: 320mm Height of roller: 160mm Inside diameter of ring: 970mm Height of ring: 160mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.165mm Capacity: 1.8-4.5 t Raymond grinding mill 5r4121 Number of roller: 5 Diameter of roller: 410mm Height of roller: 210mm Inside diameter of ring: 1270mm Height of ring: 210mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.125mm Capacity: 5-8 t Nude
Model 3R2115 Max Feeding Size (mm) 15 The final products size (mesh) 80-325(finest 500) Capacity (T/H) 0.2-1.5 Rotational Speed of the Central Axis 160Rev The inner Diameter of Roller (mm) ¿¬630 The Diameter of Roller (mm) í-210 Height of Roller and Ring (mm) 150 Motor of Mainframe Y200L-8-15KW Motor of Air Blower Y132M-4-11KW Motor of Separator Y112M-6-2.2KW Dimension (L*W*H) 4.6*3.4*5.9
Raymond mill(vipeak) With qualified products and good service, zhengzhou vipeak heavy industry machinery co., ltd supplies series raymond roller mill(raymond mill), which is suitable for grinding barite, calcite, potash feldspar, talcum, marble, limestone, ceramics, etc. Whose mohs' hardness is below 7 scales and humidity does not exceed 6% and other non-inflammable and non-explosive material. Features: Three-dimensional structure Land-saving The screen-passing rate can reach to 99% The transmission is steady and reliable; The transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Model 3r2115 Max feeding size (mm)15 The final products size (mesh)80-325(finest 500) Capacity (t/h)0.2-1.5 Rotational speed of the central axis160rev The inner diameter of roller (mm)¿¬630 The diameter of roller (mm)íd210 Height of roller and ring (mm)150 Motor of mainframey200l-8-15kw Motor of air blowery132m-4-11kw Motor of separatory112m-6-2.2kw Dimension (l*w*h)4.6*3.4*5.9 3r2115 Max feeding size(mm):15 The final products size(mesh):80-325(finest500) Raymond roller mill 3r2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t
Three-dimensional structure land-saving the screen-passing rate can reach to 99% the transmission is steady and reliable; the transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Model 3R2115 Max Feeding Size (mm) 15 The final products size (mesh) 80-325(finest 500) Capacity (T/H) 0.2-1.5 Rotational Speed of the Central Axis 160Rev The inner Diameter of Roller (mm) º¦630 The Diameter of Roller (mm) º¦210 Height of Roller and Ring (mm) 150 Motor of Mainframe Y200L-8-15KW Motor of Air Blower Y132M-4-11KW Motor of Separator Y112M-6-2.2KW Dimension (Lí-Wí-H) 4.6í-3.4í-5.9 Raymond Roller Mill 3R2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside Diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t Raymond Roller Mill 4R3216 Number of roller: 4 Diameter of roller: 320mm Height of roller: 160mm Inside Diameter of ring: 970mm Height of ring: 160mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.165mm Capacity: 1.8-4.5 t Raymond Grinding Mill 5R4121 Number of roller: 5 Diameter of roller: 410mm Height of roller: 210mm Inside Diameter of ring: 1270mm Height of ring: 210mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.125mm Capacity: 5-8 t For information, please see our website: http://www.grinderpro.com/Raymond.html
Shibang Ball Mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc.These mill has two ways of grinding: the dry process and the wet process.
Shibang Straight Centrifugal Grinder Mill is mainly used for grinding mixed materials. The machine is on purpose to grind mining materials in the fields of metallurgy, building materials, chemistry, mining and so on. It can grind the non-flammable and non-explosive mineral materials with the Mohí»s hardness lower that scale 9.5. When the mill working the motor drives the rollers suspension frame through flywheel and central shaft, and the rollers will rotate around the ring with the rollers suspension frame. After entering the hopper, the materials fall down to the rings, during this process, they are grinded by the rollers into powders or fine grains, and at last are discharged by the outlet.
Raw materials: quartz, feldspar, barite, calcite carbonate, limestone, talc, ceramic, iron ore, carborundum, bauxite, rock phosphate, coal and other materials, total about 400 kinds of materials. Capacity: 1-20t/h Max feeding size: 15-35mm Application: suitable for processing various non-flammable and non-explosive mineral materials with Mohâ??s hardness less than 9.3 and humidity less than 6%, it is widely used in the fields of metallurgy, construction, chemical industry, mining, highway construction etc Shipping ports: Shanghai, China Delivery: 15 days after received the deposit
Capacity:1-20 T/H Output Size:30-425 Mesh Feeding size:15-35mm
Final powder size is adjustable in the range of 60-600 mesh (If you need the powder 325-1500 meshes, kindly contact us for the other grinding mill.) It is available for grinding the raw materials, such as talc, calcite, limestone, marble, barite, dolomite, mica, granite, kaolin, bauxite, fly ash , iron ore, quartz, feldspar, ceramic, gypsum,, bauxite, rock phosphate, coal etc., about 400 kinds of materials in total. Technical Data: Model : 5R4119 Max. Feeding Size: 30 mm Out Put Size: 120-325 mesh Roller Number: 5 Center Shaft Speed: 105 r\min Grinding Rng Inide Dameter: 1280 mm Roller Dameter: 410 mm Capacity 4-5 t/h Passing Ratio: 90% Main Motor Power: 176 kw Weight 25.7 t Overall Size: 7.85m*8m*12m
