Product Name: Electric chain hoist TY1 Brand: Toyo Wire rope material: high quality steel Chain length: can be customized Hook material: alloy structural steel Product specifications: 1T, 2T, 3T, 5T, 10T Product packaging: wooden box packaging Features 1. Cast aluminum casing, sturdy and impact resistant, special heat dissipation design, stronger heat dissipation and lighter weight. Protection level up to IP55, wider for applicable occasions 2. The mechanical part (gear bearing, etc.) meets the international standard M5 grade design, and the service life and wear resistance are stronger. 3. The standard handle is comfortable, the button is simple, easy to operate, and the protection level can reach IP55, which can bring better protection effect and adapt to various environments. 4. The professional technical measurement of the hook hanging loop, with the prevention of the horizontal cheap tongue; not easy to break, strong ability to withstand
Heavy Duty Polyethylene Stabilizer Outrigger Pads Spreader Plates Crane Mats Manufacturer supply a range of lightweight and long-lasting spreader plates that offer stable support when operating cranes, aerial work platforms and mobile plant. Made from high quality, heavy duty UHMW polyethylene, our range of outrigger pads offer protection against water, corrosion and splintering a huge advancement over the more traditional wooden and steel alternatives. - Guaranteed Unbreakable - Made in the China - Leading time within 15 days Here, any size and color of Crane Outrigger Pad are available with us.
Made in UHMWPE, an engineering material that offers a superior combination of impact strength, wear and chemical resistance.Each pad is equipped with a durable wire handle to allow for easy storage and mobility.UHMWPE Outrigger Pads are an alternative to wood pads due to their superior characteristics and performa.Xinxing engineered plastic cribbing plates and outrigger pads are lightweight, strong, and solid designed to support your crane, and can be easily handled and positioned by one person or two. It can not be warped like wood or corroded like steel. It not break in the long guaranteed time and obviously could not attract thieves.
the mobile hydraulic scissor lift is widely used for the equipments installations and maintenance at the following places like construction sites workshops,warehouse,granary,bus/railway stations,hotels,airports,gas station and aerial pipeline. Major Features: 1-)High working capacity, easily pushed around,most spacious platforms for several people to work on 2-)High strength steel structures,smoothly lift up and drop down, easily operated,few faults. 3-)Moving method:4 wheel and 2wheel types are optional, it can be pneumatic rubber tyres,solid rubber tyres or polyurethane tyres. 4-)Power sources: local power available at the working sites(110V,220V,380V,415V),diesel engines and generators 5-)Working heights: 4m,6m,8m,10m,12m,14m,16m,18m,20m Safety : 1.) In special circumstance, the scissor lift will use explosion-proof electric equipment 2.)The platform equipped with antiskid plate to prevent slipping, it is enough safe when works on the platform. 3.)The lift has hydraulic overload protective organization to ensure that equipment will not lift when the load beyond its rated load capacity. 4. )The scissor lift equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position. 5)The platform equipped with antiskid plate to prevent slipping, it is enough safe when it works ower supply: Local power is available at the working sites(110V,220V,380V) , they also can be equipped with manual control or diesel power to meet the need where the electricity is not available.
platform size: 2270mm*1150mm Lift height: 12m Lift weight: 300-500kgs Lift speed: 4m/minutes Origin height: 1.7m Outside size: 2.5m*1.2m*1.75
platform size: 2270mm*1150mm Lift height: 12m Lift weight: 300kgs Lift speed: 4m/minutes Origin height: 1.8m Outside size: 2.5m*1.2m*1.65m
Technical characteristics: Safe load indicator JL-3000 uses industrial grade 5.7 inch LCD screen; Full patch design, waterproof, dust-proof, anti-vibration, small size and easy to disassemble; The casing is made of high-pressure cast aluminum material, beautiful, and the protection level is strong; Large-scale digital, analog CMOS integrated circuits, low power consumption; strong anti-interference ability, high reliability; The system has automatic fault detection function, which can automatically determine the fault location; The host adopts the touch button, long service life and high reliability; The system uses the latest modular integrated chip. Software can adjust the gain, the hardware without potentiometer, to solve the drift problem caused by the temperature change of the potentiometer, thus ensuring the stability of the dataï¼? With password setting to prevent parameter wrong settingï¼? With sound and light alarm functionï¼? Automatic compensation for sensors, 'temperature drift' and 'null drift'ï¼? With black box function, convenient to inquire any time.
Technical characteristics: Safe load indicator JL-3000 uses industrial grade 5.7 inch LCD screen; Full patch design, waterproof, dust-proof, anti-vibration, small size and easy to disassemble; The casing is made of high-pressure cast aluminum material, beautiful, and the protection level is strong; Large-scale digital, analog CMOS integrated circuits, low power consumption; strong anti-interference ability, high reliability; The system has automatic fault detection function, which can automatically determine the fault location; The host adopts the touch button, long service life and high reliability; The system uses the latest modular integrated chip. Software can adjust the gain, the hardware without potentiometer, to solve the drift problem caused by the temperature change of the potentiometer, thus ensuring the stability of the dataï¼? With password setting to prevent parameter wrong settingï¼? With sound and light alarm functionï¼? Automatic compensation for sensors, 'temperature drift' and 'null drift'ï¼? With black box function, convenient to inquire any time.
Technical Parameters ·Operating Voltageï¼?AC 220V±20% & DC 24V ±15% optional 12V ·Working temperatureï¼? - 20â??ï½?+60â?? ·Relative humidityï¼? ï¼?95% ï¼?25â??ï¼? ·Work patternï¼? continuous ·Power dissipationï¼? ï¼?20W ·Comprehensive errorï¼? â?¤Â±3% ·Alarm control errorï¼? â?¤Â±3%
Features - No drift, dynamic tilt measuring - Lowest cost, high performance - Built in MEMS triaxial accelerometer and triaxial gyroscope - Dynamic accuracy ±0.5°�optional ±1° or ±0.1° - Highest refresh rate 400Hz - Autonomous working, do not need any external auxiliary - Mounted wherever needed Description SST810 dynamic inclinometer is specially designed for motion application, which is an inertial product with highest 400Hz update rate. The traditional inclinometer on the market is designed on accelerometer and electrolyte principles. In dynamic motion such as rapid movement vehicle and vessel, the measurement result will be affected by extra axial acceleration and centripetal acceleration, so that valid angle measurement data can't identify effectively, and accuracy is unable to guarantee. SST810 adopts advanced inertial navigation technology to exactly measure dynamic pitch/roll tilt angle for long time, without aiding of GPS.
Application Sensor applications for full safety monitoring of tower crane are embodied in the following areas 1)Tower crane installation. Crane foundation is the basic assembly unit, the practice has proved that major security incidents are due to the problems of crane foundation. Vigor sensors can measure the installation angle, during installation, vigor sensor can real-time detection, send the warning information in time. 2)The height of the tower crane automatically rise. During the automatically rise, after adding new steel frames, the operation room is still perpendicular to the ground or not will have a great impact on the safety. 3)Tower crane vertical lifting process. Measuring the bending angle and tilt angle of the swing arm, the tilt angle of crane. 4)Tower crane horizontal delivering process. Measuring the bending angle and tilt angle of swing arm, the tilt angle of crane. 5)In the heavy windy and rainy weather conditions, measure the swing angle of crane. Tower crane installation. The height of the tower cran e automatically rise. Tower crane vertical lifting process. Tower crane horizontal delivering process. In the heavy windy and rainy weather conditions, measure the swing angle of crane. Application of sensors: Tilt Beam sensor - High resolution, accuracy & stability - High safety remote signal transmission distance>500m - U-Shaped openings in both ending, easy to connect sensors - IP65protection - Alloyed & anodized aluminum housing, corrosion-resistant, wear-resistant, artistic SST20 low cost tilt sensor - Low cost, high performance, suitable for batch application - 50Hz refresh rate, 10Hz response frequency - 0.07accuracy@-15~50? -0.2% cross-axis error - Available to horizontal, vertical, headstand, etc installation methods - IP67protection - 9~36VDC power supply - Sensing elements survive to 1500g shock while operating SST810 dynamic tilt sensor - No drift, dynamic tilt measuring - Lowest cost, high performance - Built in MEMS tri-axis accelerometer and tri-axis gyroscope - Dynamic repeatability 0.5 - Highest refresh rate 1000Hz - X/Y/Z angular rate & acceleration data available - Autonomous working, do not need any external auxiliary - Mounted wherever needed
The grab ship unloader is used for handing coal, iron ore and other bulk material at sea port. Dhhi group co., ltd. Is a leading manufacturer of ship unloader since first delivery 1988. More than 144 units of grab ship unloaders (from 500t/h to 3500t/h.) have been supplied to the ports and terminals all over the world.
The ladle car is a special transport vehicle that isused by the metallurgical enterprises to transport the molten iron from the blast furnace to the converter shop, pig casting machine shop and ingot casting shop, for tilting operation. In 1970, dhhi started to design the 45t and 65t ladle cars independently. In 1987, dhhi designed, jointly with nippon steel corporation, the 320t torpedo ladle car, through which the design and manufacturing levels of dhhi are greatly improved. In 1988, dhhi designed and manufactured the 320t torpedo ladle car independently, which was the biggest in china at that time, for shanghai baosteel group corporation. In 1989, dhhi independently developed the 320t tubular ladle car and obtained the national patent. Dhhi is able to manufacture 150t380t series ladle cars through many years of practice, accumulation and continuous innovation and improvement. Rich experience accumulation in design, manufacturing, inspection, installation, transportation, commissioning, etc. Together with high quality after-sales service makes the ladle cars designed and manufactured by dhhi enjoy very high prestige among the customers. More than 90% of ladle cars used in china are made by dhhi, and the products are exported to 12 regular customers in five countriesjapan, usa, india, turkey and brazil. Up to 1084 ladle cars manufactured by dhhi are currently used in 24 steel enterprises in china. The ladle car design and manufacturing technology of our company has been mature and we have become the leading specialist in this field in china.
RC-A5-I load moment indicator is applicable to all types of level-jib and flat-top tower cranes.The system adopts 51 single chip and 5 inch LCD,it indicates real-time working state of tower crane and record,once overload,it will cut off circuit and prevent dangerous operation,ensure crane safety operation. It provides the operator with actual and correct information on working states of tower crane on as follows through LCD:actual load,rated load,hook height,hook amplitude,slewing angel and wind speed etc.If the load reaches 50% or 80% specified moment,it will pre-alarm.If it reaches 105%,it will alarm and prevent the trolley automatically from moving outward and the hook from lifting upward.
RC-108 mobile crane load moment indicator adopts PAT technology from Germany,which available for mobile cranes in complex conditions.The system has press buttons for related working conditions.The clients can selected different working conditions to achieve safety protection on mobile crane.It also has functions of pre-alarming,overheight,overload,alarming.The clients can easily to judge the overload and overheight as per operation status.
RC-A11-II integrated load moment indicator with anti-collision&zone protection system and remote online monitoring system.It indicates real time working states of tower crane and tower crane group both on tower crane and on the online computer.The system adopted full-touch mode of operation,and the most advanced ARM system,higher integration,greater precision data acquisition.The system can show the operator and manager the most comprehensive working states of tower crane in operation. At the same height:the system will auto detect and deal it with if any interference within running radius of slewing mechanism. At the different height:the system will auto detect and deal it with if any interference between higher hook and lower slewing mechanism. The system can set up to 10 different protection zones,prohibit flying over sensitive areas such as power lines,schools,highways,building etc.Try to achieve max.working area of tower crane within ensuring tower crane safety.
Capacity 1-5 ton; moq:6 pieces; payment terms: t/t; wheel base 1192mm; overall length 1550mm; self weight 61-63kg; overall width 525mm; color green;lifting height 115mm; front roller 200*45;rear roller 82*82-60
Capacity 1-5 ton; moq:6 pieces; payment terms: t/t; wheel base 1192mm; overall length 1550mm; self weight 61-63kg; overall width 525mm; color green;lifting height 115mm; front roller 200*45;rear roller 82*82-60
Normally, single girder gantry cranes are most widely used and often in open storage yard. load capacity: 3~16tons span: 12~30m travelling speed: 20 or 30m/min lifting speed: 8 or 0.8m/min working temperature: -20~+40 control model: padent control or remote control applications: widely used in open storage yard duty group: class C or D To ensure the safety, our cranes are equipped with: Crane traveling limit switch. Weight overload protection device. Lifting height limit device. Voltage lower protection function. Phase sequence protection function. Emergency stop function. Rain cover for outside hoist, driving units, electric cubicle. Warning indicator: flashing lights and warning sounds. Wireless infra-detector for anti-collusion. We also manufacture Light crane includes four levels A1 to A4. Single girder bridge crane 0.5 t / 1 t / 2 t / 3 t / 5 tons / 10 tons / 16 tons / 20 tons. Medium crane includes two levels A5 to A6. Single girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 30 tons. Single-beam gantry crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons. Double girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons. Double girder gantry machine 5 tons / 10 tons / 16 tons / 20 tons / 32 tons /40.5 tons / 50 tons / 60 tons / 75 tons / 100 t / 150 t. Heavy duty crane includes two levels A7 to A8. Double girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons / 74 tons / 75 tons / 80 tons / 100 t / 125 t / 140 t / 150 t / 160 t / 180 t / 200 t / 225 t / 240 t / 280 t / 300 t / 320 t / 350 t. Single-beam gantry crane 10 tons / 15 tons / 20 tons / 32 tons / 40 tons / 50 tons. Double girder gantry machine 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons / 75 tons / 100 t / 150 t / 200 t. OEM is welcomed, if you have any interest, pls feel free to contact us. electrical and other parts packaged by high quality plywood crates,beams packaged by plastic woven cloth.
1- LD Model Single Girder EOT Cranes, Lifting capacity from 0.5t -32tons. 2- LH Model Hoist type Double Girder EOT Cranes, Lifting capacity from 2t- 50/10tons, Work duty: M3-M4. 3- QD Model Winch type Double girder EOT Cranes, Lifting capacity from 5t -660/200/50tons, Work duty: M5- M7. 4- LB Model Explosion proof type Single girder EOT Cranes, Lifting capacity from 0.5t- 20tons. 5- QZ Model Grab type EOT Cranes, Lifting capacity from: 5t- 20tons. 6- YZ Model Casting type Double girder EOT Cranes, Lifting capacity from 10t -125/50tons. 7- QB Model Explosion proof type double girder EOT Cranes, Lifting capacity from 5- 75/20tons. 8- Slewing type EOT Cranes, Lifting capacity: 5+5t -20+20tons. 9- LX model suspension type single girder EOT Cranes, Lifting capacity: 1t -10tons. 10- All kinds Manual type EOT Cranes, Please kindly tell us your detailed requirement and the working conditions, we can help you to choose which model is much more suitable to your requirement. We also manufactureLight crane includes four levels A1 to A4. Single girder bridge crane 0.5 t / 1 t / 2 t / 3 t / 5 tons / 10 tons / 16 tons / 20 tons. Medium crane includes two levels A5 to A6. Single girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 30 tons. Single-beam gantry crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons. Double girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons. Double girder gantry machine 5 tons / 10 tons / 16 tons / 20 tons / 32 tons /40.5 tons / 50 tons / 60 tons / 75 tons / 100 t / 150 t. Heavy duty crane includes two levels A7 to A8. Double girder bridge crane 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons / 74 tons / 75 tons / 80 tons / 100 t / 125 t / 140 t / 150 t / 160 t / 180 t / 200 t / 225 t / 240 t / 280 t / 300 t / 320 t / 350 t. Single-beam gantry crane 10 tons / 15 tons / 20 tons / 32 tons / 40 tons / 50 tons. Double girder gantry machine 5 tons / 10 tons / 16 tons / 20 tons / 32 tons / 50 tons / 75 tons / 100 t / 150 t / 200 t. OEM is welcomed, if you have any interest, pls feel free to contact us. electrical and other parts packaged by high quality plywood crates,beams packaged by plastic woven cloth.
