S1009-P 9 RJ-45 10/100M Ports POE Switch with power adapter Products Description: The S1009-P is a 9 ports POE switch which is designed by Shenzhen Hi-Net Technology Company. It provides 9 10/100M RJ45 Ports and 4 or 8 PoE Ports. The POE ports can automatically detect and supply power for the IEEE802.3af and IEEE802.3at compliant Powered Devices (PDs), like Voip Phone, PoE APs, IP Phones, IP cameras, etc. The S1009-P is a small size metal-shell device which is useful for the small office, home and the IP solution project using. All POE ports support both IEEE802.3af and IEEE802.3at Standard; each port can output 30W max. Three optional power supplies for your choice (65W, 96W, 135W, can choose from the order list). Extend Function: Port Lightning protection, Power lightning protection, solid vlan. Product Features: â?¢ IEEE802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE802.3af, IEEE802.3at â?¢ Provides 9 10/100Base-TX ports â?¢ Provides 4 or 8 PoE Port, each port output 30W max power â?¢ Reliable Power Adapter supply power for both network switch and POE â?¢ Three optional power adapters: 65W, 96W, 135W â?¢ 4K entry MAC address table of the PoE switch with auto-learning and auto-aging â?¢ High back-plane bandwidth 1.8Gbps â?¢ IEEE802.3x Flow control for Full-duplex Mode and backpressure for Half-duplex Mode â?¢ Surge protection for power port and data ports â?¢ Compact metal case for desktop or wall-mounting â?¢ EMI standards complies with FCC, CE class B â?¢ Extend Function: Port Lightning protection, Power lightning protection, solid vlan. Product Specifications: Item Description Summarize Fixed port 9 10/100Base-TX ports. POE Port 8 POE Ports(1-8 Port) or 4 POE ports(1-4 Port) LED Indicators PWR, PoE, Link/Act LED. Input voltage 100Vï½?240V ACï¼?50/60Hz (for power adapter) 48VDC (for PoE switch) Network Standard IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3x Flow Control, IEEE 802.3az Network Media 10BASE-TX: UTP category 5, 5e cable (â?¤250m) 100BASE-TX: UTP category 5, 5e cable (â?¤150m) Power Supplies 65W,96W,135W Optional Operating temperature 0â??ï½?40â??. Storage temperature -10â??ï½?70â??. Relative humidity 20%ï½?85% (non-condensing). Thermal methods Fanless. Switching capacity 1.8G. MAC address table 4K. Traffic control IEEE 802.3x full-duplex flow control. Size 205*122*33.5cm Weight
*. Input:100-240VAC 50/60Hz *. Output:48VDC 0.32A 15.5W *. AC socket: IEC320 C6 or C8 optional *.Ethernet rate: 10/100/1000Mbps gigabit *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Active type, compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 84% Min *.Ripple & Noise:4800mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black
Equipped with the latest Intel, Qualcomm processors, strong performance High-brightness touchscreen display designed for outdoor use Wifi, Bluetooth, satellite communication and a variety of network connections Replaceable, high-capacity batteries Support interface, slot expansion customization IP68 military-grade MIL-STD-810H certified
New Passive PoE Injector single output 52VDC 90W PoE power supply Dual RJ45 PoE adapter for 5G Ethernet Switch Antenna *. Input:100-240VAC 50/60Hz*. Output: 52Vdc 90W *. AC socket: IEC320-C14, 3 pins socket *.Ethernet rate:1G/2.5G/5G *.Connector:1*RJ45 for PoE + 1*RJ45 for LAN *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standar:Non-IEEE802.3AF/802.3AT, Passive type *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 85% Min *.Ripple & Noise:480mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black Company Profile * GRT established in 2007, is the manufacturer who specialized in research and development, production, sales, service as one. GRTis located in Shunde(the Kingdom of Home-Appliance), owns several Senior professional engineers, to research, develop and design kinds of power supplies and provide various customized solutions. *.All items is with 2% output accuracy and compliance with international standard. Owns license of Importing and Exporting and Pass kinds of international approvals like as UL, GS,TUV,CCC,CE, FCC,ROHS,ERP,PSE, CB,SAA ect, suitable for the global markets. *.Owns ISO9001:2015 and kinds of advanced machines for production and testing. *.Owns two green workshops which covers area 8000 square meters. monthly output upto 880K Our Services & Strength *. Offer OEM service, accept print your own logo and special requirements for package and others *. Experienced Technical team, to provide kinds of solutions *. Provided authorized certifications *. 100% Full Burn-In Testing, strictly inspect and control during production FAQ 1.MOQ :500pcsas the the first order, small qty (more than 100pcs) will be acceptable. 2.Sample terms *Common sample:2pcs are free offered, the buyer shall pay for the shipping cost and Tax; Leadtime within one week *. Special Sample: the buyer shall pay for the sample cost, shipping cost, Tax, R&D cost (if caused) Leadtime will be confirmed when the project starting 3. Mass production 20-25 working days, from the day got the confirmed order and payment 4. Shipment By Sea, By Air, By Train, By Express ect 5.Payment: T/T in advance, L/C
Passive PoE Injector 24VDC 1A 24W PoE adapter 100Mbps Ethernet switch antennae networking AP CCTV camera *. Input:100-240VAC 50/60Hz *. Output: 48Vdc 1.25A 60W *. AC socket: IEC320-C14, 3 pins socket *.Ethernet rate:10/100/1000Mbps Gigabit *.Connector:1*RJ45 for PoE + 1*RJ45 for LAN *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 86% Min *.Ripple & Noise:480mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black
Gigabit Passive PoE Injector 48VDC 0.5A 24W PoE adapter 1000Mbps Ethernet switch antennae networking AP CCTV camera *. Input:100-240VAC 50/60Hz *. Output:48VDC 0.5A 24W *. AC socket: US plug, 2 pins plug *.Ethernet rate: 10/100/1000Mbps gigabit *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 84% Min *.Ripple & Noise:4800mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black
High intensity focused . The effective penetration depth of High intensity focused is 8cm, covering the whole neural network anddriving the contraction of the whole musclelayer; .The effect of fat apoptosis and "super muscle exercise" can never be achieved by physicalexercise; .Studies in the United States have shown that the effect of four treatments is the best; .The treatment experience is good. EMS Most of the energy of the current is concentrated in thesurface layer, only a small part can reach the muscle; Feeling a slight tingling or contraction; Advantageï¼? Easy to lose weight and rebuild your body shape Dissolve fat Simplicity ofoperator Tyra firming thin arms thin legs thin belly thin body thin buttock
Computer hard drive SSD NGFF interface, 256GB, brand new, OEM accepted
This FiberHTT 1550 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 80km. The SFP+ 80km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
This FiberHTT 1310nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. The SFP+ 40km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
This Hengtaitong 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
This FiberHTT 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 2km. The SFP+ 2km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
The Hengtaitong SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
The FiberHTT HPBT3R2-LR single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-LR module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC
The FiberHTT HPBT2R3-LR single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT2R3-LR module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT HPBT3R2-L2 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-L2 module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT H9S3124-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of 1310nm. The transmitter section incorporates an advanced FP and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
The FiberHTT H9B5324-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of Tx 1550nm Rx1310nm. The transmitter section incorporates an advanced DFB and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
The FiberHTT H9B3524-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of Tx1310nm Rx1550nm. The transmitter section incorporates an advanced FP and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
Hot Pluggable QSFP28 form factor Supports 101.3Gb/s aggregate bit rate Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF Single MPO-12 receptacle Power dissipation:
