Coal ash less than 20% Sulphur 0.9% FOB 149 USD If you need and serious buyer please contact us
The Specification Of Semi Coke A-----Semi coke lump:used in ferroalloy industry such as FeSi ,FeNi,and Calcium Carbide . F.C 83%min Ash 9%max V.M 8%max S 0.4%max P 0.01-0.03% Size : 6-18 mm 15-35 mm 90%min Moisture 15%max B -----Semi coke Powder used for sinter plant , blast furnace and steel manufacturing. F.C 76%min Ash 12%max V.M 12%max S 0.4%max P 0.03-0.05%max Size 0-6 mm 90%min Moisture 15%max
Anthracite coal F.C :84%-92% Ash :6%-15% max Moisture:3% max Sulphur: 0.35% max /0.5%max/1.0%max V.M: 4.0% max Size: 10-30mm
Anthracite coal can be as the water filter media to soften the water hardness, but also can be as the fuel to provide heat for metal industry.general enterprises and various types of boiler for heating, the number of large and scattered, coal accounts for about 30% of the steam coal. It is mainly for sintering and injection in the blast furnace using anthracite, its dosage is less than 1% of power coal.
U36 Shaped Steel Support Keywords: U Shaped Steel Support, Steel Roof Support Beam, Roof Support Beams Price Introduction of U36 Shaped Steel Support U36Â steel support is mainly used for mine tunnel, mine tunnel secondary support, as well as support through the mountain tunnel support purposes. U-shaped steel bracket Features: withstand pressure, support long time, easy to install and easy to deformation characteristics. 36U steel frame consists of a roof beams, two legs, four card cable, two bottom feet composition. Mainly used in mine tunnel, mine tunnel secondary support, as well as support through the mountain tunnel support and so on. Product characteristic of U36 Shaped Steel Support 1 Bear heavy pressure , support long time, has the characteristics of easy installation and not easily out of shape 2 Carrying capacity of the yielding and stable and reliable, to adapt to the load and deformation of the soft surrounding rock 3 The section utilization ratio is high, support the back is convenient, small amount of maintenance. 4 High rate of recovery and reuse, reduce timber use and environmental benefit is obvious. P
china coal0001 Q235 SS400 U Type Arch Steel for Mine Timbering Keywords: U Channel Steel Supports, U Arch Steel, Roof Support Beams Introduction of Q235 SS400 U Type Arch Steel for Mine Timbering Q235 SS400 U Type Arch Steel for Mine Timbering is ideal for all support timbering applications where greater strength and superior corrosion resistance is required. Stainless Channel has a durable dull, mill finish that is widely used for all types of fabrication projects that are exposed to the elements - chemical, acidic, fresh water, and salt water environments. The standard length for most size channel is 12â??-14â?? random lengths, but lengths are available in some sizes up to 20â?? and longer. Finishes on channel can vary and include cold drawn, centerless ground, smooth turned, rough turned, turned ground and polished, and HRAP. We will custom saw cut to length. DEFARS or domestic material available in many sizes. Polishing services are available. Main Parameter of Q235 SS400 U Type Arch Steel for Mine Timbering GradeSS400 Q235 A36 Web width50mm-320mm Web thickness4.5mm-9.5mm Flange width37mm-88mm StandardGB JIS ASTM Length 6/9/12m Size 50mm*37mm*4.5mm-320mm*88mm*8mm Applications building
6.China Coal Mine Shed Support Keywordsï¼?Tunnel Steel Support Price, Support Beam For Sale, Mine Shed Support Introduction of China Coal Mine Shed Support Our shed steel support is in high quality , Material 20 K, the advantages of using this material is shed stand high carrying capacity, the pressure to accept large support for a long time, not easy to deformation, wear and corrosion Our company can provide U-shaped steel support according with the customersâ?? requirements with the drawings or send our technicians to go to measure on site and recommend the most appropriate fit the dimensions of the roadway. U-shaped steel support consists of: three sections of four U-shaped steel side shelf parts corner plate part . U-shaped steel support Materialï¼?20MnK Parameter of China Coal Mine Shed Support Specification:U25,U29,U36Assembly:Topbeam,twolandinglegs,fourclamps, twobaseplates Material:20MnKQ275Webwidth:50mm-320mm Webthickness:4.5mm-9.5mmFlangewidth:37mm-88mm Standard:GBJISASTMLength:6/9/12m
china coal0001 sales@chinacoalintl.com +86-537-2350961 SGD-320/17B Coal Mine Transport Scraper Conveyor scraper conveyor, coal scraper conveyor, mine scraper conveyor Introduction of SGD-320/17B Coal Mine Transport Scraper Conveyor SGD-320/17B Coal Mine Transport Scraper Conveyor is designed to mainly for horizontal transportation in the underground coal mining industry and metallurgical mine. The SGB and SGD series scraper conveyor is applicable to be used on the underground mining face of small and medium-size coal mine for transporting coal. Operating Principle of SGD-320/17B Coal Mine Transport Scraper Conveyor SGD-320/17B Coal Mine Transport Scraper Conveyor for materials horizontally delivery, the pressure which comes from chains in conveying direction to the materials and the action which comes from the materials themselves cause internal friction. This friction ensures the stable situation between material layers, and it can overcome external frictional resistance which causes by moving materials in the groove and makes materials transport as whole fluid. Technical Parameters of SGD-320/17B Coal Mine Transport Scraper Conveyor Single stranded scraper conveyorDouble strand scraper conveyor ModelSGD280/7.5SGD280/11SGD320/17SGB280/11SGB320/11SGB320/17 The transportation loses:(t/h)303040304050 Completed(m)406080505060 Scraper chain (mm)10*4010*4014*5010*4010*4014*50 Chain fast (m/s)0.5140.630.590.630.630.59 Electrical machinery (Kw) 7.51117111117 Gross weight (t)22.596.022.563.755.2
Size:150*150 200*200 can do as you Thickness:4mm-12mm Usage:for anchor bolt in coal mine supporting
G-high calcined anthracite is produced when anthracite is calcined under the temperature of 1240¡ãc in vertical shaft furnaces. G-high calcined anthracite is mainly used in electric steel ovens, water filtering, rust removal in shipbuilding and production of carbon material. Specifications: Gh-cac-1 Fc(fixed carbon) 95% min, ash 4.0% max, vm(volatile matter) 1.0% max, s(sulphur)0.3% max, moisture 1.0% max Gh-cac-2 Fc(fixed carbon) 93% min, ash 5.5% max, vm(volatile matter) 1.5% max, s(sulphur) 0.3% max, moisture 1.0% max Gh-cac-3 Fc(fixed carbon) 90% min, ash 8.0% max, vm(volatile matter) 2.0% max, s(sulphur 0.5% max, moisture 1.0% max Size 1-3mm, 1-4mm, 1-5mm, 4-10mm, or at customers'option. At customers'option
Total Moisture (ARB) 18 Max Inherent Moisture (ADB) 10% Ash (ADB) 10% Volatile Matter (ADB) 40-42% Total Sulphur 90MM >10%. 50,000MT Per month , yearly contract . DLC 98%+2%.
Black brown powder It can be used with sulfonated pitch and sulfonated phenolic resin. Package:25kg/bag.
Exchange capacity: 250-360 Particle Size 0.3-1.5mm % í¦ 80 Moisture % 20-40 in 40kgs/wpp bag.
Exchange capacity: 250-360 Particle size 0.3-1.5mm % í² 80 Moisture % 20-40 In 40kgs/wpp bag.
Specification: Measurement range: Co:0-100% C02:0-50% Ch4:0-10% H2:0-50% O2:0-25% Precision:co/co2/ch4/:2%, o2/h2:3%(fs) Resolution:0.01% Response time:less than 20s Warm up:10min Output: 4-20ma or rs232 3u size casing
Coal tar pitch Related properties of medium temperature coal tar pitch Parametersunits first classsecond class Softening point (ring-ball)80~9075~95 Ti( toluene insolubles)15~25n25 Qi( quinoline insolubles)6~106~15 B- resin no less than-- Coking value no less than -- Dust no more than0.30.3 Moisture no more than55 Related properties of modified coaltar pitch Parameters unitsfiest classsecond class Softening point(ring-ball)100~115100~120 Ti( toluene insolubles) 28~34>26 Qi( quinoline insolubles) 8~146~15 B- resin no less than1816 Coking value no less than5450 Dust no more than0.30.3 Moisture no more than55
Taixi anthracite coal Taixi Anthracite Coal with the following specifications: 1) A.Size:8-30mm,10-30mmú¼ B.Moisture: 5%Max.(on receive basis) C.Ash: 7.0% Max.(on dry basis) D.Sulphur:0.4%Max.(on dry basis) E.Volotile Matter:9.0% Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) 2)A.Size: 18-40mm and 25-60mm ,30-80mm B.Moisture: 5%Max.(on receive basis) C.Ash:7-8 %Max.(on dry basis) D.Sulphur:0.5%Max.(on dry basis) E.Volotile Matter:9-9.50%Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) 3) A.Size:0-6mm,0-13mm, B.Moisture: 8%Max.(on receive basis) C.Ash: 7-8.0% Max.(on dry basis) D.Sulphur:0.5%Max.(on dry basis) E.Volotile Matter:9.0% Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) In bulk and super bag
The full name of the coal burning lime kiln is fully automatic mechanized coal burning vertical steel-shell lime kiln, and Kiln type is vertical cylindrical.The fuel for the equipment is mainly solid fuel, such as coke, bituminous coal, anthracite, briquette.
Type Chemical Composition SQA-CPT SofteningPoint Ash TolueneInsoluble QuinolineInsouble CokingValue Moisture 110-115â?? 0.3%max 28-32% 6-10% 54%min 5%max Packing: 1MT bags or 25kg bags Or according to customer's requirements Supply Ability: 1000MT per month
Type F.C Sulphur V.M Ash Moisture %(min) %(max) SQA-CAC-95 95 0.25 1.0 4.0 0.5 SQA-CAC-94 94 0.25 1.0 5.0 0.5 SQA-CAC-93 93 0.3 1.0 6.0 0.5 �·�·�· �·�·�· Size According to customer's requirement Packing: 1MT bags Or 25kg bags Or accroding to customer's requirement Supply Ablility: 4000MT per month
