SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
PSL60S. Floor-type 3-phase 5-line DC ev charger. It is applicable to US, EU, JP, UK and other international electrical standards of 380V - 15%, 60KW commercial type 2 electric vehicle intelligent charging station. technical parameter: Input rating: 380V ± 15%; Rated power: 60KW; Output voltage range: 150-1000VDC; Output current range: 0-250A; Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P; Support communication: APP, RFID Card, Button; External Communication 3G\4G LAN(RJ-45) and WIFI Connector: 2 sets; Cable length: random standard with 5m. Support to purchase 10m, 15m; Operating temperature: -25C~ + 50C; Operating humidity: 5%~98%; Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen; Working life of connector machinery: 10000 times (no-load plugging); Quality assurance: 12 months; Waterproof grade: IP54; Product certification: 3C, CE, ROHS, REACH, cULus. Commodity features: Smart charger product 3-phase; DC 380V± 15%; DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker most countries such as electric car market family (residential) and commercial purposes; Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection; Waterproof grade: IP54; Noise control: 60dB; Human-machine interface: 7-inch LCD color display screen touch screen, LED indicator light; OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.; Body materials: metal; Quality assurance: 12 months; Device selection: support OEM customization. Step Price (FOB): 1. Sample unit price,USD27825.00 2. 200set, USD16695.00 3. 400set, USD15025.50 4. 600set, USD13523.00 5. 800set, USD12170.70
Product description 1. Model: 9.6v 2/3a1400mah ni-mh high power rechargeable battery pack for airsoft gun (8s of fh-2/3a1400p). 2. Un, rohs, ce approved ni-mh battery pack. 3. Ni-mh battery pack oem orders are welcomed. 4. Ni-mh battery pack is widely used to consumer portable equipments, information devices, miner lamps, power tools, remote control toys, medical devices, vacuum cleaner, cordless phone, etc. 5. Bulk pack, blister card are available. 6. For ni-mh high power series 2/3a size other capacity are available from 900mah to 1600mah. 7. Customizes shapes, capacity, and voltage are accepted. 8. Individual cells can be assembled in parallel or series into stacks as required by customers. 9. No memory effect, high voltage, high energy density, long cycle life. 10. Eco-friendly. Cell:Ni-mh Model:8s of fh-2/3a1400p Nominal voltage:9.6v Nominal capacity:1400mah Minimal capacity:1300mah Charge current:Standard charge : 0.1c(140ma) Rapid charge : 0.5c(700ma) Charging time:Standard charge : 16.0 hours (ref.) Rapid charge : 2.4 hours (ref.) Continuous discharge current:10c (14a), discharge average voltage:1.13v per sigle cell Cut-off discharge voltage:6.4v Dimensions(t*w*l):Approx.: 18.5mm* 36mm * 122mm Weight:Approx. 200g Operating temperature:Charge : 0 ~ 45 ºc Discharge: -10 ~ 60 ºc Storage temperature:At -5 ~ 35 ºc recommend(25±5 ºc) Control required 1) -?v: 0 ~ 5mv 2) d t / d t: 0.8 ºc/ min 3) t co: 40 ~ 45 ºc NoteStorage capacity should be 40%~50% full charge capacity.
Product description 1. Model: ni-mh battery 14.4v d9000mah rechargeable battery pack(12s of fh-d9000). 2. Un, rohs, ce approved ni-mh battery pack. 3. Ni-mh battery pack oem orders are welcomed. 4. Ni-mh battery pack is widely used to consumer portable equipments, information devices, miner lamps, power tools, remote control toys, medical devices, vacuum cleaner, cordless phone, etc. 5. Bulk pack, blister card are available. 6. For ni-mh standard industrial series d size, other capacity are availabe from 2500mah to 10000mah. 7. Customizes shapes, capacity, and voltage are accepted. 8. Individual cells can be assembled in parallel or series into stacks as required by customers. 9. No memory effect, high voltage, high energy density, long cycle life. 10. Eco-friendly. Ni-mh 12v d9000mah rechargeable battery pack(10s of fh-d9000) CellNi-mh Model12s of fh-d9000 Nominal voltage14.4v Nominal capacity9000mah Minimal capacity8800mah Standard charge900 ma, 16 hrs Rapid charge: 4500 ma, 2.2 hrs (control required) Continuous discharge Less than 9000 ma Final discharge voltage1.0 v (less than 1.0c) Service life =500 cycles (iec61951-2-2003) Dimension(w*l*h) 65mm*198mm*65 Weight Approx. 1960 g Ambient temperature:Standard charge: 0~45 ºc Rapid charge: 10~40 ºc Discharge: -20~50 ºc Store (65+20% rh)Less than 360 day: -20~30 ºc Less than 30 day: -20~40 ºc Notes: 1."c" behind the model no. Refers to normal consumer series ; 2. Capacity obtained after charge at 0.1c for 16 hrs and discharge at 0.2c to 1.0v at 25 ºc; 3. Control required: 1) -?v: 0 ~ 5mv 2) d t / d t: 0.8 ºc/ min 3) t co: 40 ~ 45 ºc
Product description 1. Model: ni-mh battery 6.0v d3800mah rechargeable battery pack(6s of fh-d3800). 2. Un, rohs, ce approved ni-mh battery pack. 3. Ni-mh battery pack oem orders are welcomed. 4. Ni-mh battery pack is widely used to consumer portable equipments, information devices, miner lamps, power tools, remote control toys, medical devices, vacuum cleaner, cordless phone, etc. 5. Bulk pack, blister card are available. 6. For ni-mh standard industrial series d size, other capacity are availabe from 2500mah to 10000mah. 7. Customizes shapes, capacity, and voltage are accepted. 8. Individual cells can be assembled in parallel or series into stacks as required by customers. 9. No memory effect, high voltage, high energy density, long cycle life. 10. Eco-friendly. Ni-mh 6v d3800mah rechargeable battery pack(5s of fh-d3800) CellNi-mh Model5s of fh-d3800 Nominal voltage6.0v Nominal capacity3800mah Minimal capacity3700mah Standard charge380 ma, 16 hrs Rapid charge: 1900 ma, 2.2 hrs (control required) Continuous discharge Less than 3800 ma Final discharge voltage1.0 v (less than 1.0c) Service life =500 cycles (iec61951-2-2003) Dimension(w*l*h) 33mm*165mm*65 Weight Approx. 400 g Ambient temperature:Standard charge: 0~45 ºc Rapid charge: 10~40 ºc Discharge: -20~50 ºc Store (65+20% rh)Less than 360 day: -20~30 ºc Less than 30 day: -20~40 ºc Notes: 1."c" behind the model no. Refers to normal consumer series ; 2. Capacity obtained after charge at 0.1c for 16 hrs and discharge at 0.2c to 1.0v at 25 ºc; 3. Control required: 1) -?v: 0 ~ 5mv 2) d t / d t: 0.8 ºc/ min 3) t co: 40 ~ 45 ºc
Product description 1. Model: ni-mh 12v d10000mah rechargeable battery pack(10s of fh-d10000). 2. Un, rohs, ce approved ni-mh battery pack. 3. Ni-mh battery pack oem orders are welcomed. 4. Ni-mh battery pack is widely used to consumer portable equipments, information devices, miner lamps, power tools, remote control toys, medical devices, vacuum cleaner, cordless phone, etc. 5. Bulk pack, blister card are available. 6. For ni-mh standard industrial series d size, other capacity are availabe from 2500mah to 10000mah. 7. Customizes shapes, capacity, and voltage are accepted. 8. Individual cells can be assembled in parallel or series into stacks as required by customers. 9. No memory effect, high voltage, high energy density, long cycle life. 10. Eco-friendly. Ni-mh 12v d10000mah rechargeable battery pack(10s of fh-d10000) CellNi-mh Model10s of fh-d10000 Nominal voltage12v Nominal capacity10000mah Minimal capacity9800mah Standard charge1000 ma, 16 hrs Rapid charge: 5000 ma, 2.2 hrs (control required) Continuous discharge Less than 15000 ma Final discharge voltage1.0 v (less than 1.0c) Service life =500 cycles (iec61951-2-2003) Dimension(w*l*h) 65mm*165mm*65 Weight Approx. 1800 g Ambient temperature:Standard charge: 0~45 ºc Rapid charge: 10~40 ºc Discharge: -20~50 ºc Store (65+20% rh)Less than 360 day: -20~30 ºc Less than 30 day: -20~40 ºc Notes: 1."c" behind the model no. Refers to normal consumer series ; 2. Capacity obtained after charge at 0.1c for 16 hrs and discharge at 0.2c to 1.0v at 25 ºc; 3. Control required: 1) -?v: 0 ~ 5mv 2) d t / d t: 0.8 ºc/ min 3) t co: 40 ~ 45 ºc
Product power: 113,000MAH Product dimensions: 283*200*55 Product weight (Net): About 3.8KG Cell type: ICR18650 Lithium battery Standard charge current: 2500mA Maximum charging current: 3000mA Minimum charging voltage: 14V Maximum charging voltage: 19V Charge mode: CC-CV (constant current/voltage charge) Allowable maximum continuous discharge current: 30A Charging temperature range: 0 -45oC Discharge temperature range: -10 -60oC Storage temperature range: 0 -45oC, within 30 days Lon-term storage temperature range: 0-40oC, 180 days Storage humidity: 45 -85%RH Product power: 113,000MAH Product dimensions: 283*200*55 Product weight (Net): About 3.8KG Cell type: ICR18650 Lithium battery Standard charge current: 2500mA Maximum charging current: 3000mA Minimum charging voltage: 14V Maximum charging voltage: 19V Charge mode: CC-CV (constant current/voltage charge) Allowable maximum continuous discharge current: 30A Charging temperature range: 0 ~45oC Discharge temperature range: -10 ~60oC Storage temperature range: 0 ~45oC, within 30 days Lon-term storage temperature range: 0~40oC, 180 days Storage humidity: 45 ~85%RH
Product dimensions: 230*161*25.5mm Product weight (net): 1700g Cell typ: ICR18650 lithium battery Standard charge current: 2000mA Maximum charging current: 2500mA Minimum charging voltage: 14V Maximum charging voltage: 19V Charge mode: CC&CV (constant current/voltage charge) Allowable maximum continuous discharge current 15A Charging temperature range: 0C to +45C Discharge temperature range: -10C to +60C Storage temperature range: 0C to 45C, within 30 days Long-term storage temperature range: 0C to 40C, 180 days Storage humidity range: 45% - 85%RH Product dimensions: 230*161*25.5mm Product weight (net): 1700g Cell typ: ICR18650 lithium battery Standard charge current: 2000mA Maximum charging current: 2500mA Minimum charging voltage: 14V Maximum charging voltage: 19V Charge mode: CC&CV (constant current/voltage charge) Allowable maximum continuous discharge current 15A Charging temperature range: 0C to +45C Discharge temperature range: -10C to +60C Storage temperature range: 0C to 45C, within 30 days Long-term storage temperature range: 0C to 40C, 180 days Storage humidity range: 45% - 85%RH
ModeL24/1548/1548/30110/05110/10220/05220/10 Cell voltage measurement type2V/6V/12V Cell voltage measurement range2V:04V;6V:08V;12V:015V Cell voltage resolution2V/6V:0.001V;12V:0.01V Voltage measurement range of battery string030V060V060V0135V0270V0270V String voltage resolution0.01V0.1V Voltage testing accuracy0.5% Discharge current working range2A150A2A150A2A300A250A2-100A250A2100A Constant current discharge voltage range21V30V42V60V42V60V90140V90140V180270V180270V Discharge PowerMax. 4.5kwMax. 9kwMax. 18kwMax. 7kwMax. 13.5kwMax. 13.5kwMax. 27kw Current testing accuracy1% Battery capacity check range20Ah1500 Ah20Ah1500 Ah20Ah3000 Ah20500Ah201000Ah20500Ah201000Ah Current testing accuracy1% Capacity check testing range extensionOne external load added, the testing capacity range doubled Cell data collection methodwire,wireless(optional) Monitoring current range0300 A Working voltageAC220 Cooling modeRefrigeration by blast Working environment;20%80%RH Storage condition-20;C storage and transport Communication modeRS232 communication Data storage modeSD card Display mode4.7 inch TFT Instrument dimensions(mm)400*243*301430*248*381400*243*301 Weight(Kg)141714 Carry methodPortable type Dimensions : 40*24*30cm Weight : 13kg Packing: as your option
Long lift battery No Memony Effet 100% Compatible with original battery Built -In Protection of circuit board Standard 6 cells laptop battery
BTS is mainly used on performance testing and cycle testing of rechargeable batteries in battery producing factories, scientific research institutes and QC department. BTS (connected with net port) is composed by host computer, middle-subordinate machine and lower-subordinate machine, and BTS (connected with serial port) is composed by host computer and lower-subordinate machine. We are able to make for a range of current from 1mA to 1000A, a range of voltage from 2V to 500V to meet customers' special needs. wooden box.
The fast, easy and accurate way to evaluate batteries. Get a complete battery analysis in about 5 seconds with the durable, handheld Digital battery analyzer and tester. It can display the voltage, battery condition and available power quickly so you know immediately if you battery needs service or if the battery is bad. Can test by CCA, SAE, JIS, EN, DIN, IEC. 230-110-60 mm.
BX1 Technical Specification Single-phase, on-portable, Top type transformer, step current adjustment fan cooling hight duty cycle, safely and reliable Nice-looking easy moving suitable for industrial usage Wooden case package whitout accessories.
Mini Battery Charger
12PSB-HTA Feature: 1. Principle frequency conversion timing 2. Big output torsion, small speed drop value, high precision 3. Rotate speed ten level preset 4. Rotate speed, counting., temperature digital display 5. Automatic control fuel temperature 6. Positive and negative pressure equipped with gas source 7. 12V/24V DC power 8. Over-pressure, over-load, over-heat protection function Function: 1. Test oil supply in every cylinder under different rotate speed 2. Examine statically oil supply time in every cylinder 3. Examine timing machine performance 4. Test electromagnetic valve of dispensing pump 5. Test leakproofness of oil injection pump 6. Check pump inner pressure and oil back pressure of dispensing pump 7. Examine pressure compensator performance 8. Examine pneumatically actuated timing machine performance 9. Examine air film timing machine pressure load capacity Dimension: 2100x750x1800 Weight:1000kg Wood packing
Hi, My name is Darcy Huang and I am the Sales Manager of PLB. PLB is a high-tech enterprise and specializes in R&D, manufacturing 26650 lithium ion battery in Dongguan China. Our factory has been working since Feb 10th, If interested to acquire please let me know, I would love to provide more information on this. Thank you. Darcy@plb.com.cn
24v 20Ah lithium battery pack with smart BMS for robots charge current: 20A or custom discharge current: 40A or custom weight: 3.0Kg±0.5Kg size: L170mm*W142mm*H105mm or custom communication protocal: CAN or custom
Our company's valve regulating micro-capsule series lead-acid batteries provide reliable, multifunctional and maintenance-free power supply. Using German Seiko technology, the common silica and silica gel were replaced by polymer microcapsule colloid, and the patent number was 0313(Z)16. Thixogel makes these batteries completely waterproof, providing many options for installation. Excellent anti-seismic performance, flame retardant material for ABS shell. Gel electrolyte provides more protection for battery plates, and the working temperature ranges from MINUS 30 to 50, which can be placed horizontally. It is more suitable for deep cyclic discharge. The cycle service life of the battery is greatly prolonged, and the design exceeds 15 years. These batteries have longer discharge time and shorter charge time, which is an ideal choice for many renewable energy applications. According to customer requirements, the company also provides a series of lead-acid batteries for non-recycling energy use.
Product Model BLV :UPS1260D Capacity:12V/60AH UPS BATTERY Battery Type: Lithium battery Output model: 500W(standard),1000W(Maximum) USB Output: 2USB output ports fit for any mobile, IPad, tablet, or other 5V electronic devices DC Output: 2*12V ports, maximum 20A output current AC Input: 110-250V,50/60Hz Solar charging: 18V (100W max.) Blackout Response Time:
After years of research and development our company has successfully developed a series Battery discharge tester with high intelligence and precision with its proprietary technology. Discharge meter can be in offline mode battery as discharge load Through continuously regulating discharge current constant discharge current at the set value can be realized. When discharging the instrument will automatically stop discharging when the battery terminal voltage or monomer voltage falls to the set lower limit or the set discharge time or the set discharge capacity and record all valuable and continuous real-time process data. Battery discharge meter system the voltage monitoring information of single battery is simple safe and accurate with wireless relay access. Battery discharge meter has a very friendly man-machine interface which can not only complete all kinds of settings and data query under the prompt of menu but also save the process data of discharge in the memory of the equipment transfer to the U disk through the data interface and analyze the data through the special software of the upper computer to generate the required curve and report.
