Find Verified Plumbing Pipes Fittings Flanges Elbows Hoses Suppliers, Manufacturers and Wholesalers

Classification : Incoloy Alloy
Incoloy Pipe is a nickel-iron-chromium alloy with molybdenum and copper added. Incoloy Pipe has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice corrosion. Incoloy Pipe is Especially resistant to sulfuric and phosphoric acids.

Kitchen Faucet

Lead free kitchen faucet with NSF certificate.

1. 5 seconds instantaneous heating.
2. Material: Brass & ABS•
3. Chrome finish
4. Separate electricity wall design.
5. Dry burning prevention.
6. Sink mounted
7. Single handle
8. With swivel spout fit for two basins
9. Temperature: 30 - 60 degrees (adjustable)
10 .Easy to install and use
11. Waterproof:IPX4
12. Come with 1.5m power line.

Instruction:
1. Temperature: 30 - 6 0 degrees (adjustable)
2. Rated voltage: 220V-250V
3. Rated frequency: 50-60Hz
4. Rated input power: 2500W.

PK diaphragm solenoid valve is an automatic control parts used in refrigeration system to control the refrigerant to pass or not pass, the valve is widely used in compressor group, central air-conditioning, cold storage equipment and bus air-conditioning system

Magnetic check valve was designed with magnet diaphragm, and sealed by the metal. it was used on the exhaust pipe of the compressor, for inside, it uses guide device and automatic suchtion design thant prevent reverse refrigerant flow in liquid lines and compressor discharge lines.

Plunger ball valve.

Suitable for package AC, indoor-unit of ceiling-type AC. The pump is used to drain out the condesed water from the evaporator formed during refrigerating cycle and drying. The pump is of high efficiency, low vibration, light, small size and ole power consumption

TX Plunger solenoid valves are direct or servo operated solenoid valves for liquid, suction, and hot gas lines with fluorinated refrigerants.

TX Plunger solenoid valves are direct or servo operated solenoid valves for liquid, suction, and hot gas lines with fluorinated refrigerants.

Model KFP Pressure indicating Controllers indicate and control a process variable by converting its pressure change into mechanical displacement of a bellows or a spiral pressure receiving element.
Indicating transmitters and indicating transmitting controllers also are available as well as indicating controllers. The controllers are available either in the local type to set the set-point value with the knob on the instrument or in the cascade type (remote type) to set the set-point value with a pneumatic signal.
**A wide variety of measuring elements and control mechanisms are available to meet various applications.
**A pneumatic circuit board and a heat-resistant weatherproof sturdy hard case are used, thereby greatly improving the durability and reliability.
**The pneumatic circuit board system allows to readily add or eliminate control mechanisms and units, thereby enhancing the system modification and expansion flexibility.
**Interchangeable parts are used to the maximum practicable extent, thereby reducing the number of parts to be kept in stock.
**A balancing weight and a pulsation damping spiral (optional) are employed, thereby making the instruments highly resistant against mechanical vibration and process pulsation.

Model KFK Pressure indicating Controllers (adjustable range type) indicate and control a process variable by converting its pressure into mechanical displacement of a bellows or a spiral pressure receiving element.
Indicating transmitters and indicating transmitting controllers also are available as well as indicating controllers. The controllers are available either in the local type to set the set-point value with the knob on the instrument or in the cascade type (remote type) to set the set-point value with a pneumatic signal.
**A wide variety of measuring elements and control mechanisms are available to meet various applications.
**A pneumatic circuit board and a heat-resistant weatherproof sturdy hard case are used, thereby greatly improving the durability and reliability.
**The pneumatic circuit board system allows to readily add or eliminate control mechanisms and units, thereby enhancing the system modification and expansion flexibility.
**Interchangeable parts are used to the maximum practicable extent, thereby reducing the number of parts to be kept in stock.
**The detecting section is identical with that of the pressure transmitter of PREX3000 Pneumatic Transmitter Series.

The KF Series of Field Mounted Indicating Controllers, which the special manufacturing techniques is introduced from Japanese Yamatak-Honeywell Co., Ltd, provides both application flexibility and instrumentation savings by employing a common type of indicating control section in each instrument. All process variables, such as temperature, pressure, level and flow, can be measured and controlled by the same type of instrument. The difference is only in the detector. Thus, the KF Series provides model simplicity and uniformity, and requires very little in the way of maintenance.
The KF Series comprises not only Indicating Transmitters but also Indicating Transmitting Controllers. They are united in structure, and combined in functions, complete in varieties and specifications with stable performance, high precision, strong anti-interference ability, high reliability, and are easy to mount and maintain. They are intrinsically safe and explosion-proof, able to drive the pneumatic performance mechanism directly, so they have been generally well accepted and trusted by domestic and foreign customers.

Model KFT Temperature Indicating Controllers indicate and control a process variable by converting its temperature change into mechanical displacement of a bellows through change in expansion of liquid-fill by temperature or change in gas-fill pres-sure by temperature.
Indicating transmitters and indicating transmitting controllers also are available as well as indicating controllers. The controllers are available either in the local type to set the set-point value with the knob on the instrument or in the cascade type(remote type) to set the set-point value with a pneumatic set-point signal.
**A wide variety of measuring elements and control mechanisms are available to meet various applications.
**A pneumatic circuit board and a heat-resistant weatherproof sturdy case are used , thereby greatly improving the durability and reliability.
**The pneumatic circuit board system allows to readily add or eliminate control mechanisms and units, thereby enhancing the system modification and expansion flexibility.
**Interchangeable parts are used to the maximum practicable extent, thereby reducing the number of parts to be kept in stock.
**A bellows type pressure receiving element, which provides a larger torque and a higher resistance against vibration, is employed.
**A Compensation mechanisms for ambient temperature change is incorporated.

Faucet Series>> 004 Series
Name: M-E0041

Features and Benefits
Wider EPDM seat design, replaceable, its suit for different type of flanges.
ISO5211 standard top flange, suit for different operations.
Eccentric pin on the stem, not destroy structure of the stem, make sure the safety and strongth.
Lever operation BWLX: DN50~DN150.

Applicable Standards
Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2
Top flange standard: ISO5211
Face to face standard: BS EN558-1
Pressure test standard: BS EN12266-1, API598

Technical Data
Nominal diameter:DN50~DN150(2"~6") Nominal pressure: PN16
Working temperature: -5C ~ +85C Sealing test:1.1PN
Shell test:1.5PN
Suitable for: Water, ethylene glycol, non correction medium, etc.

Materials in ANSI316, ANSI304, 1.4308, 1.4408, 1.4581
Working Pressure: 150 PSI
Thread in accordance with ANSI B2.1, BS21-1973, DIN259/2999, ISO228

Our sanitary stainless steel ball valves are specially designed for food, beverage, dairy, pharmaceutical and cosmetic industries. Made of high-quality SS304/SS316L with inside and outside mirror polishing, no dead angle and no material residue. Equipped with food-grade silicone and PTFE seal, zero leakage, high temperature resistant and fully FDA & GMP compliant.
Support CIP/SIP cleaning, available in tri-clamp, weld and thread connection. Manual, pneumatic and electric types optional. Compact structure, easy installation and maintenance, ideal for high-purity sterile fluid pipeline systems.
Our sanitary diaphragm valves are specially developed for sterile and high-purity fluid control, widely applied in food, beverage, dairy, pharmaceutical, cosmetic and biotech industries. Different from conventional industrial valves, this valve adopts non-retention dead space design, effectively avoiding medium residue and bacterial growth. It fully complies with FDA food-grade standards and GMP production requirements, making it the ideal pipeline component for sterile production systems.
Our sanitary stainless steel butterfly valves are specially designed for food, beverage, dairy, pharmaceutical and cosmetic industries. Made of high-quality SS304/SS316L with inside and outside mirror polishing, no dead angles and no material residue. Equipped with food-grade silicone and PTFE seal, zero leakage, high temperature resistant and fully FDA & GMP compliant.
Support CIP/SIP cleaning, available in tri-clamp, weld and thread connection. Manual, pneumatic and electric types optional. Compact structure, lightweight, easy installation and maintenance, ideal for high-purity sterile fluid pipeline systems.
SEO Keywords: Sanitary butterfly valve, food grade butterfly valve, stainless steel sanitary butterfly valve, pneumatic sanitary butterfly valve, electric sanitary butterfly valve, tri clamp butterfly valve, pharmaceutical butterfly valve, hygienic butterfly valve, CIP sanitary butterfly valve

80-680
Water level meter can do manual inspection which can be used to observe the water level inside water wells, boreholes, water level pipes, etc.

The advantage is water level meter can check the water level in an accurate, fast, and simple way with its sensitive sensor.

There are 2 types for Naijiu Water Level Meter: ABS material blue & Ion blue, length from 30m-800m, we can do customization according to the customer requirements.

Main Parts
Probe
Material: Stainless Steel

Steel ruler
Material: Steel & Plastic

Receiving system
It consist of Sounder (beep) & indicator light

Specification For 30m-500m, exceed 500m need to do customization.
Minimum Reading(mm): 1.0
Repetitive Reading(mm): �±2.0
Operation Voltage(V): DC=9

Operation Steps
1. Power On
2. Probe Inside Well
3. Probe Move Down Slowly
4. Probe Touch Water
5. Sounder Beep

Notes
Turn off immediately & Remove the battery (9V) after used.
Probe and the Steel ruler must be clean and neat after used.
Donâ??t bend the measuring cable to avoid the cable to be damaged.
Storage Temp: - 10 ~ +40 â?? . Dry & Ventilated , room temp should below 80% with non-corrosive gas

Sanitary Vs. Standard Electromagnetic Flow Meters
d and beverage processing. Choosing between sanitary and standard models can significantly impact cost, compliance, and operational efficiency. This guide helps you select the right flow meter for your facility, whether you need an electromagnetic flow meter for beer, pure water, or jam, or a food grade flow meter for dairy and beer.

Key Requirements for Food-Grade Flow Meters
Food and beverage applications require hygienic electromagnetic flow meters that meet strict hygiene and safety standards:

Hygienic Design

3-A Sanitary Certification: Ensures smooth surfaces (â?¤0.8 �µm roughness) with no crevices to prevent bacterial growth.
FDA-Compliant Materials: PTFE or PFA liners and 316L stainless steel electrodes prevent contamination.
CIP/SIP Compatibility: Withstands high-temperature caustic cleaning cycles.
Material Safety

Non-toxic, non-absorbent materials.
No lubricants or seals that could harbor pathogens.
Performance in Low-Conductivity Fluids

Advanced models with â??Signal Boostâ?? technology can measure low-conductivity liquids like milk (~500 �µS/cm).
Ideal for applications requiring a conductivity meter for food and beverage or a food grade electromagnetic flow meter.

liquid mass flow meter

Coriolis Mass Flowmeter (abbreviated as CMF) is a high â?? precision flow instrument that directly measures the mass flow of fluids. It operates based on the principle of the Coriolis Effect. It can not only measure mass flow but also simultaneously obtain parameters such as density and temperature, and is widely used in fields such as petrochemical, food and medicine, and energy metering.

Working Principle
Coriolis Effect
When the fluid flows through the vibrating measuring tube, a Coriolis Force is generated, causing the measuring tube to undergo a slight deformation. By detecting this deformation, the mass flow of the fluid can be calculated.



Measuring tube vibration: The electromagnetic drive makes the measuring tube vibrate at its natural frequency.
Phase difference detection: When the fluid is flowing, the vibration phase difference between the inlet and the outlet is proportional to the mass flow.
Density calculation: The vibration frequency of the measuring tube is related to the fluid density, enabling synchronous density calculation.

Brass body
brass screw pipe+brass nut
AC/DC double use
G1/2*G1/2-500mm stainless steel hose
foam box+inner box+carton

Brass body

Brass Screw pipe+brass nut

AC/DC double use

G1/2*G1/2-500mm stainless steel hose

Foam box+inner box+carton

Product Code: 3P6102, single lever pull-out kitchen mixer, Brass body with chrome finished, with 35mm caramic cartridge, zinc alloy handle, zinc alloy holder for silicone tube with 2 functions shower head, 2 pcs 40cm stainless steel braided hose. any more information please feel free to contact us by mail.

Product Code: 3P6101, single lever pull-out kitchen mixer, Brass body with chrome finished, with 35mm caramic cartridge, zinc alloy handle, zinc alloy holder for silicone tube with 2 functions shower head, 2 pcs 40cm stainless steel braided hose. any more information please feel free to contact us by mail.

Product Code: 3P6100,
single lever pull-out kitchen mixer,
Brass body with chrome finished,
with 35mm caramic cartridge,
zinc alloy handle,
blass tube with 1.5m nylon pull-out hose,
and 2 functions shower head,
2 pcs 40cm stainless steel braided hose.

Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.

According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.

According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.

Our company produces pipes and fittings of various materials, sizes and standard specifications

In particular, some heavy industrial pipe fittings, as well as processing and production according to the drawings, are our strengths

We supply high quality alluminium alloy piping system for compressed air. Our pipe fittings are designed for zero leakage, long lasting and easy installation. Please contant us if you are interested, we would be pleased to provide you with more details.

Specification
BS3799

Nominal Size
A (Min) W (Min) E (Min)
b
(1>
C (Min) F (Min) Equal Reducing
In DN In DN
(2)
3M
ï¼?2ï¼?
6M
1/8 (6) 11 26 10 5 2 6
1/4 (8) 15 36 15 8 6 6
1/4 x 1/8 (8x6) 15 31 15 5 2 6 10
3/8 (10) 18 40 16 11 8 8 3/8x174 (10x8) 18 39 16 8 6 8 15
1/2 (15) 22 48 20 14 11 8
1/2 x 3/8 (15x10) 22 44 20 11 8 8 16 172x1/4 (15x8) 22 43 20 8 6 8 15
3/4 (20) 27 52 21 19 13 10 3/4 x 1/2 (20x15) 27 50 21 14 11 9 20 3/4 x 3/8 (20x10) 27 46 21 11 8 9 16
1 (25) 35 60 25 24 17 10
1x3/4 (25x20) 35 56 25 19 13 10 21 1x1/2 (25x15) 35 55 25 14 11 10 20
1-1/2 (40) 50 68 26 38 30 16
1-1/2 x1 (40x25) 50 67 26 24 17 16 25 1-1/2x374 (40x20) 50 63 26 19 13 16 21 1-172x1/2 (40x15) 50 62 26 14 11 16 20
2 (50) 62 71 27 49 39 17
2x1-172 (50x40) 62 70 27 38 30 17 26 2x1 (50x25) 62 70 27 24 17 18 25 2x3/4 (50x20) 62 65 27 19 13 17 21 2x1/2 (50x15) 62 65 27 14 11 18 20

Socket weld union

Specification
Class 3000

Nom.
pipe
size
Pipe Socket Socket Water Laying Male Nut Thrds. Bearing Depth Length Clear
End Bore Wall Way Length Flange Per of Assem. Assem.
Dia. Bore 25.4 Socket Nom. Nut
A
B
(1)
(Min) C
D(1)
(Min) F(Min)
G mm
(Min) J (Min) K
L N
1/8
21.8 11.18
10.67
3.18
7.59
6.07
22.4
19.1
3.18 3.18 16 1.24 9.7 41.4 50.8
1/4
21.8 14.61
14.10
3.30
10.01
8.48
22.4
19.1
3.18 3.18 16 1.24 9.7 41.4 50.8
3/8
25.9 18.03
17.53
3.51
13.28
11.76
26.9
20.6
3.43 3.43 14 1.37 9.7 46.0 55.9
1/2
31.2 22.23
21.72
4.09
16.56
15.04
26.9
20.6
3.68 3.68 14 1.50 9.7 49.0 58.4
3/4
37.1 27.56
27.05
4.27
21.69
20.17
31.8
25.4
4.06 4.06 11 1.68 12.7 56.9 66.0
1
45.5 34.29
33.78
4.98
27.41
25.88
34.3
26.2
4.57 4.45 11 1.85 12.7 62.0 78.7
1-1/4
54.9 43.05
42.55
5.28
35.81
34.29
40.6
32.5
5.33 5.21 10 2.13 12.7 71.1 94.0
1-1/2
61.5 49.15
48.64
5.54
41.66
40.13
42.2
34.0
5.84 5.59 10 2.31 12.7 76.5 111.8
2
75.2 61.62
61.11
6.05
53.26
51.74
45.5
37.3
6.60 6.35 10 2.69 15.7 86.1 132.1
2-1/2
91.7 74.45
73.81
7.67
64.24
61.19
61.7
52.1
7.49 7.11 8 3.07 15.7 102.4 149.9
3
109.2 90.42
89.79
8.31
79.45
76.40
63.8
53.6
8.26 8.00 8 3.53 15.7 109.0 175.3

Specification
Class 6000

Nom.
Pipe
Size Pipe End
(Min) A
Wall (Min)
C
Water
Way
Bore
D(1)
Male
Flange
(Min) F
Nut
(Min) G
Thrds. Per
25.4mm H
Bearing
(Min) J
Length
Assem.
Nom. L
Clear
Assem.
Nut N
1/8 16.5 3.15 8.43 3.20 3.18 3.18 16 1.24 41.4 50.8
1/4 21.1 3.68
11.13
5.59
3.43 3.43 14 1.37 46.0 55.9
3/8 25.1 4.01
14.27
8.36
3.68 3.68 14 1.50 49.0 58.4
1/2 31.0 4.78
17.86
11.02
4.06 4.06 11 1.68 56.9 66.0
3/4 37.8 5.56
23.01
14.78
4.57 4.45 11 1.85 62.0 78.7
1 46.2 6.35
28.98
19.94
5.33 5.21 10 2.13 71.1 94.0
1-1/4 54.9 6.35
37.69
28.70
5.84 5.59 10 2.31 76.5 111.8
1-1/2 62.5 7.14
43.54
33.22
6.60 6.35 10 2.69 86.1 132.1
2 77.7 8.74
55.58
42.09
7.49 7.11 8 3.07 102.4 149.9
2-1/2 92.2 9.53
66.27
53.21
8.26 8.00 8 3.53 109.0 175.3
3 111.3 11.13
82.55
65.89
10.19 10.19 8 4.06 158(2) 200.7

(1) Upper and lower values for each size are the respective maximum and minimum dimensions.
(2) The actual length is 190.5mm from MSS SP-83 2014.

Full coupling ,half coupling,reducing coupling and cap Threaded

Threaded
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Specification:
ASME B16.11
ASME B1.20.1 (NPT)


Threaded
DN
Nom.pipe
size W P D G B L2
3000&60003000 6000300060003000 6000
6 1/8" 32 19 16 4.8 6.4 6.7
8 1/4'' 35 25 27 19 25 4.8 6.4 8.1 10.2
10 3/8'' 38 25 27 22 32 4.8 6.4 9.1 10.4
15 1/2" 48 32 33 28 38 6.4 7.9 10.9 13.6
20 3/4" 51 37 38 35 44 6.4 7.9 12.7 13.9
25 1" 60 41 43 44 57 9.7 11.2 14.7 17.3
32 1-1/4" 67 44 46 57 64 9.7 11.2 17.0 18.0
40 1-1/2" 79 44 48 64 76 11.2 12.7 17.8 18.4
50 2" 86 48 51 76 92 12.7 15.7 19.0 19.2
65 2-1/2" 92 60 64 92 108 15.7 19.0 23.6 28.9
80 3'' 108 65 68 108 127 19.0 22.4 25.9 30.5
100 4'' 121 68 75 140 159 22.4 28.4 27.7 33.0

Threaded
Class 2000-1/2 (DN15) to 2-1/2 DN65)
Class 3000-1/2 (DN15) to 2 (DN50)
Socket Weld
Class 2000-1/2 (DN15) to 2-1/2 (DN65)
Class 3000-1/2 (DN15) to 2 (DN50)

Specification
Class 3000
Class 6000



Nom. Pipe
Size
Type(2) Socket Shank
Dia.
SD
Laying
Length A Bore D Wall (Min) C
Length
SL RL (Min)
3M 6M
Dia. B
Depth
(Min) K
3M 6M 3M 6M 3M 6M 3M 6M 3M 6M
2 x 1-1/4 2 2 42.9 12.5 60.3 20.6 23.9 35.0 29.4 6.07 7.9238.1 41.1
2 x 1 2 2 34.1 12.5 60.3 22 A 25.4 26.6 20.7 5.69 7.92 38.1 41.1
2^3/4 2 2 27.4 12.5 60.3 23.9 26.9 20.9 15.5 4.90 6.96 38.1 41.1
2 x 1/2 2 2 22.0 9.5 60.3 25.4 28.4 15.8 11.7 4.67 5.97 38.1 41.1
2-1/2 x 2 1 1 61.4 16.0 73.0 46.0 42.7 52.4 42.8 6.93 10.92 38.1 31.8
2-1/2 x 1.1/2 2 2 49.0 12.5 73.0 35.0 35.0 40.8 33.9 6.35 8.92 53.8 53.8
2-1/2 x 1-1/4 2 2 42.9 12.5 73.0 36.6 36.6 35.0 29.4 6.07 7.92 53.8 53.8
2-1/2 x 1 2 2 34.1 12.5 73.0 38.1 38.1 26.6 20.7 5.69 7.92 53.8 53.8
2-1/2 x 3/4 2 2 27.4 12.5 73.0 39.6 38.1 20.9 15.5 4.90 6.96 53.8 53.8
3 x 2-1/2 1 1 74.1 16.0 88.9 38.1 57.2 62.7 54.0 8.76 11.91 31.8 44.4
3x2 2 2 61.4 16.0 88.9 25.4 31.8 52.4 42.8 6.93 10.92 47.4 53.8
3 x 1-1/2 2 2 49.0 12.5 88.9 28.4 31.8 40.8 33.9 6.35 8.92 47.4 53.8
3 x 1-1/4 2 2 42.9 12.5 88.9 30.2 31.8 35.0 29.4 6.07 7.92 47.4 53.8
3 x 1 2 2 34.1 12.5 88.9 31.8 31.8 26.6 20.7 5.69 7.92 47.4 53.8
4x3 2 90.0 16.0 114.3 33.3 77.9 9.52 60.4
4 x 2-1/2 2 74.1 16.0 114.3 38.1 62.7 8.76 60.4
4x2 2 61.4 16.0 114.3 38.1 52.4 6.93 60.4
4 x 1-1/2 2 49.0 12.5 114.3 41.1 40.8 6.35 60.4
4 x 1-1/4 2 42.9 12.5 114.3 42.9 35.0 6.07 60.4

Threaded
Class 2000-1/4 (DN6) to 4 (DN100)
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Socket Welded
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Class 9000-1/2 (DN15) to 2 (DN50)

Specification:
ASME B16.11
ASME B1.20.1 (NPT)

Threaded
DN
Nom.
Pipe
size
A C H G B L
2000 3000 6000 2000 3000 6000 2000 3000 6000 2000 3000 6000
6 1/8" 21 21 25 17 17 19 22 22 25 3.18 3.18 6.35 6.4 6.7
8 1/4'' 21 25 28 17 19 22 22 25 33 3.18 3.30 6.60 8.1 10.2
10 3/8'' 25 28 33 19 22 25 25 33 38 3.18 3.51 6.98 9.1 10.4
15 1/2" 28 33 38 22 25 28 33 38 46 3.18 4.09 8.15 10.9 13.6
20 3/4" 33 38 44 25 28 33 38 46 56 3.18 4.32 8.53 12.7 13.9
25 1" 38 44 51 28 33 35 46 56 62 3.68 4.98 9.93 14.7 17.3
32 1-1/4" 44 51 60 33 35 43 56 62 75 3.89 5.28 10.59 17.0 18.0
40 1-1/2" 51 60 64 35 43 44 62 75 84 4.01 5.56 11.07 17.8 18.4
50 2" 60 64 83 43 44 52 75 84 102 4.27 7.14 12.09 19.0 19.2
65 2-1/2 76 83 95 52 52 64 92 102 121 5.61 7.65 15.29 23.6 28.9
80 3'' 86 95 106 64 64 79 109 121 146 5.99 8.84 16.64 25.9 30.5
100 4'' 106 114 114 79 79 79 146 152 152 6.55 11.18 |18.67 27.7 33.0

Notes:
3) Dimensions in Millimeters.
4) Other information please contact BNK for further assistance

Threaded
Class 2000-1/2 (DN15) to 2-1/2 (DN65)
Class 3000-1/2 (DN15) to 2 (DN50)
Socket Weld
Class 2000-1/2 (DN15) to 2-1/2 (DN65)
Class 3000-1/2 (DN15) to 2 (DN50)

Threaded
DN
Nom
pipe
size
B L2 A E G H
2000 3000 2000 3000 2000 3000 2000 3000 2000 3000 2000 3000
15 1/2" 10.9 10.9 13.6 13.6 46 55 20 23 3.18 4.09 33 46
20 3/4" 12.7 12.7 13.9 13.9 55 65 23 26 3.18 4.32 38 56
25 1" 14.7 14.7 17.3 17.3 65 73 26 31 3.68 4.98 46 62
32 1-1/4"17.0 17.0 18.0 18.0 73 82 31 35 3.89 5.28 56 75
40 1-1/2"17.8 17.8 18.4 18.4 82 113 35 42 4.01 5.56 62 84
50 2" 19.0 19.0 19.2 19.2 113 124 42 49 4.27 7.14 75
65 2-1/2"23.6 28.9 136 56 5.61 92
Socket Weld
DN
Nom.Pipe
Size B
C
AVE. Min.
C
AVE. Min. D A E
G
(Min)
J
(Min)
3000 6000 3000 6000 3000 6000 3000 6000 3000 60003000 60003000 6000
15 1/2 21.8 21.8 4.67 4.09 5.97 5.18 15.8 11.8 35 41 9 9 3.75 4.78 9.5 9.5
20 3/4 27.2 27.2 4.90 4.27 6.96 6.04 21.0 15.6 41 51 9 12 3.95 5.56 12.5 12.5
25 1 33.9 33.9 5.69 4.98 7.92 6.93 26.7 20.7 51 59 12 17 4.55 6.35 12.5 12.5
32 1-1/4 42.7 42.7 6.07 5.28 7.92 6.93 35.1 29.5 59 68 17 21 4.85 6.35 12.5 12.5
40 1-1/2 48.8 48.8 6.35 5.54 8.92 7.80 40.9 34.0 68 95 21 24 5.10 7.14 12.5 12.5
50 2 61.2 61.2 6.93 6.04 10.92 9.50 52.5 42.9 95 106 24 31 5.55 8.74 16.0 16.0
65 2-1/2 73.9 8.76 7.67 62.7 118 38 7.05 16.0

Notes:
1) Dimensions in Millimeters.
2) Other information please contact BNK for further assistance.

Threaded
Class 3000-1/8 (DN6) to 28 (DN65)
Class 6000-1/8 (DN6) to 2 (DN50)

Threaded
DN
Nom.
pipe
size H A J
G 1
(Min.)
G 2
(Min.)
B
(Min.)
L2
(Min.)
L
(Min.)
3000 6000 3000 6000 3000 6000 3000 6000 3000 6000
6 1/8" 19 25 19 22 25 32 3.18 5.08 2.74 4.22 6.4 6.7 10.0
8 1/4'' 25 32 22 25 32 38 3.30 5.66 3.22 5.28 8.1 10.2 11.0
10 3/8'' 32 38 25 28 38 41 3.50 6.98 3.50 5.59 9.1 10.4 13.0
15 1/2" 38 44 28 35 41 48 4.09 8.15 4.16 6.53 10.9 13.6 14.0
20 3/4" 44 51 35 44 48 57 4.32 8.53 4.88 6.86 12.7 13.9 16.0
25 1" 51 62 44 51 57 66 4.98 9.93 5.56 7.95 14.7 17.3 19.0
32 1-1/4" 62 70 51 54 66 5.28 10.59 5.56 8.48 17.0 18.0 21.0
40 1-1/2" 70 84 54 64 71 84 5.56 11.07 6.25 8.89 17.8 18.4 21.0
50 2" 84 102 64 83 84 105 7.14 12.09 7.64 9.70 19.0 19.0 22.0

Notes:
1) Dimensions in Millimeters.
2) Other information please contact BNK for further assistance

Specification:
ASME B16.11
ASME B1.20.1 (NPT)

Nom.Pipe
Size A B C D E F G H
6 1/8" 10 6 7 10 35 6
8 1/4'' 11 6 10 14 41 16 3 6
10 3/8'' 13 8 11 18 41 18 4 8
15 1/2" 14 10 14 21 44 22 5 8
20 3/4" 16 16 27 44 27 6 10
25 1" 19 13 21 33 51 36 6 10
32 1-1/4" 21 14 24 43 51 46 14
40 1-1/2" 21 16 28 48 51 50 8 16
50 2" 22 18 32 60 64 65 9 18
65 2-1/2" 27 19 36 73 70 75 10 19
80 3'' 28 21 41 89 70 90 10 21
100 4'' 32 25 65 114 76 115 13 25

Specification
Class 3000

Nom.
Pipe
Size
Pipe
End
(Min) A
Wall
(Min)
C
Water
Way
Bore
D(1)
Male
Flange
(Min) F
Nut
(Min)
G
Thrds.
Per
25.4mm
H
Bearing
(Min) J
Length
Assem.
Nom. L
Clear
Assem.
Nut N
1/8 14.7 2.41
8.43
6.43
3.18 3.18 16 1.24 41.4 50.8
1/4 19.0 3.02
11.13
9.45
3.18 3.18 16 1.24 41.4 50.8
3/8 22.9 3.20
14.27
13.51
3.43 3.43 14 1.37 46.0 55.9
1/2 27.7 3.73
17.86
17.07
3.68 3.68 14 1.50 49.0 58.4
3/4 33.5 3.91
23.01
21.39
4.06 4.06 11 1.68 56.9 66.0
1 41.4 4.55
28.98
27.74
4.57 4.45 11 1.85 62.0 78.7
1-1/4 50.5 4.85
37.69
35.36
5.33 5.21 10 2.13 71.1 94.0
1-1/2 57.2 5.08
43.54
41.20
5.84 5.59 10 2.31 76.5 111.8
2 70.1 5.54
55.58
52.12
6.60 6.35 10 2.69 86.1 132.1
2-1/2 85.3 7.01
66.27
64.31
7.49 7.11 8 3.07 102.4 149.9
3 102.4 7.62
82.55
77.27
8.26 8.00 8 3.53 109.0 175.3
(1) Upper and lower values for each size are the respective maximum and minimum dim

OutsideDiameterEnd
to
End
Wall Thickness
Large
End D1
Small
End D2
T1 T2
Sch40
(STD)
Sch80
(XS)
Sch160 xxs
Sch40
(STD)
Sch80
(XS)
Sch160 XXS
1/4 X1/8 13.7 10.3 57 2.2 3.0 3.7 6.1 1.7 2.4
3/8 X1/8 17.1 10.3 64 23 3.2 4.0 6.4 1.7 2.4
3/8 X1/4 17.1 13.7 64 2.3 3.2 4.0 6.4 2.2 3.0
1/2 X1/8 21.3 10.3 70 2.8 3.7 4.8 7.5 1.7 2.4
1/2 X1/4 21.3 13.7 70 2.8 3.7 4.8 7.5 2.2 3.0
1/2 X3/8 21.3 17.1 70 2.8 3.7 4.8 7.5 2.3 3.2
3/4 X1/8 26.7 10.3 76 2.9 3.9 5.6 7.8 1.7 2.4
3/4 X1/4 26.7 13.7 76 2.9 3.9 5.6 7.8 2.2 3.0
3/4 X3/8 26.7 17.1 76 2.9 3.9 5.6 7.8 2.3 3.2
3/4 X1/2 26.7 21.3 76 2.9 3.9 5.6 7.8 2.8 3.7 4.8 7.5
1 X1/8 33.4 10.3 89 3.4 4.5 6.4 9.1 1.7 2.4
1 X1/4 33.4 13.7 89 3.4 4.5 6.4 9.1 2.2 3.0
1 X3/8 33.4 17.1 89 3.4 4.5 6.4 9.1 2.3 3.2
1 X1/2 33.4 21.3 89 3.4 4.5 6.4 9.1 2.8 3.7 4.8 7.5
1 X3/4 33.4 26.7 89 3.4 4.5 6.4 9.1 2.9 3.9 5.6 7.8
1-1/4 X1/8 42.2 10.3 102 3.6 4.9 6.4 9.7 1.7 2.4
1-1/4 X1/4 42.2 13.7 102 3.6 4.9 6.4 9.7 2.2 3.0
1-1/4 X3/8 42.2 17.1 102 3.6 4.9 6.4 9.7 2.3 3.2
1-1/4 X1/2 42.2 21.3 102 3.6 4.9 6.4 9.7 2.8 3.7 4.8 7.5
1-1/4 X3/4 42.2 26.7 102 3.6 4.9 6.4 9.7 2.9 3.9 5.6 7.8
1-1/4 X1 42.2 33.4 102 3.6 4.9 6.4 9.7 3.4 4.5 6.4 9.1
1-1/2 X1/8 48.3 10.3 114 3.7 5.1 7.1 10.2 1.7 2.4
1-1/2 X1/4 48.3 13.7 114 3.7 5.1 7.1 10.2 2.2 3.0
1-1/2 X3/8 48.3 17.1 114 3.7 5.1 7.1 10.2 2.3 3.2
1-1/2 X1/2 48.3 21.3 114 3.7 5.1 7.1 10.2 2.8 3.7 4.8 7.5
1-1/2 X3/4 48.3 26.7 114 3.7 5.1 7.1 10.2 2.9 3.9 5.6 7.8

Threaded
Class 2000-1/4 (DN6) to 4 (DN100)
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Socket Welded
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Class 9000-1/2 (DN15) to 2 (DN50)

Specification:
ASME B16.11
ASME B1.20.1 (NPT)

Threaded
DN
Nom.
Pipe
size
A C H G B L
2000 3000 6000 2000 3000 6000 2000 3000 6000 2000 3000 6000
6 1/8" 21 21 25 17 17 19 22 22 25 3.18 3.18 6.35 6.4 6.7
8 1/4'' 21 25 28 17 19 22 22 25 33 3.18 3.30 6.60 8.1 10.2
10 3/8'' 25 28 33 19 22 25 25 33 38 3.18 3.51 6.98 9.1 10.4
15 1/2" 28 33 38 22 25 28 33 38 46 3.18 4.09 8.15 10.9 13.6
20 3/4" 33 38 44 25 28 33 38 46 56 3.18 4.32 8.53 12.7 13.9
25 1" 38 44 51 28 33 35 46 56 62 3.68 4.98 9.93 14.7 17.3
32 1-1/4" 44 51 60 33 35 43 56 62 75 3.89 5.28 10.59 17.0 18.0
40 1-1/2" 51 60 64 35 43 44 62 75 84 4.01 5.56 11.07 17.8 18.4
50 2" 60 64 83 43 44 52 75 84 102 4.27 7.14 12.09 19.0 19.2
65 2-1/2 76 83 95 52 52 64 92 102 121 5.61 7.65 15.29 23.6 28.9
80 3'' 86 95 106 64 64 79 109 121 146 5.99 8.84 16.64 25.9 30.5
100 4'' 106 114 114 79 79 79 146 152 152 6.55 11.18 |18.67 27.7 33.0

45 Weldolet

Threaded
Class 2000-1/4 (DN6) to 4 (DN100)
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Socket Welded
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Class 9000-1/2 (DN15) to 2 (DN50)

Specification:
ASME B16.11
ASME B1.20.1 (NPT)

Threaded
DN
Nom.
Pipe
size
A C H G B L
2000 3000 6000 2000 3000 6000 2000 3000 6000 2000 3000 6000
6 1/8" 21 21 25 17 17 19 22 22 25 3.18 3.18 6.35 6.4 6.7
8 1/4'' 21 25 28 17 19 22 22 25 33 3.18 3.30 6.60 8.1 10.2
10 3/8'' 25 28 33 19 22 25 25 33 38 3.18 3.51 6.98 9.1 10.4
15 1/2" 28 33 38 22 25 28 33 38 46 3.18 4.09 8.15 10.9 13.6
20 3/4" 33 38 44 25 28 33 38 46 56 3.18 4.32 8.53 12.7 13.9
25 1" 38 44 51 28 33 35 46 56 62 3.68 4.98 9.93 14.7 17.3
32 1-1/4" 44 51 60 33 35 43 56 62 75 3.89 5.28 10.59 17.0 18.0
40 1-1/2" 51 60 64 35 43 44 62 75 84 4.01 5.56 11.07 17.8 18.4
50 2" 60 64 83 43 44 52 75 84 102 4.27 7.14 12.09 19.0 19.2
65 2-1/2 76 83 95 52 52 64 92 102 121 5.61 7.65 15.29 23.6 28.9
80 3'' 86 95 106 64 64 79 109 121 146 5.99 8.84 16.64 25.9 30.5
100 4'' 106 114 114 79 79 79 146 152 152 6.55 11.18 |18.67 27.7 33.0

Specification
Class 3000

Nom Pipe Size
(Min) A
B1 B D
K (Min)
L
1/4 21.8 13.7 14.61
14.10
10.01
8.48
9.7 554
3/8 25.9 17.1 18.03
17.53
13.28
11.76
9.7 60.0
1/2 31.2 21.3 22.23
21.72
16.56
15.04
9.7 68.0
3/4 37.1 26.7 27.56
27.05
21.69
20.17
12.7 75.9
1 45.5 33.4 34.29
33.78
27.41
25.88
12.7 86.0
1-1/4 54.9 42.2 43.05
42.55
35.81
34.29
12.7 95.1
1-1/2 61.5 48.3 49.15
48.64
41.66
40.13
12.7 100.5
2 75.2 60.3 61.62
61.11
53.26
51.74
15.7 112.1

Full range of copper alloy pipe fittings.
.

Threaded Branch Outlet

Threaded
Class 2000-1/4 (DN6) to 4 (DN100)
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Socket Welded
Class 3000-1/4 (DN6) to 4 (DN100)
Class 6000-1/4 (DN6) to 4 (DN100)
Class 9000-1/2 (DN15) to 2 (DN50

pipeolet