PET sheet is a new type of material developed in recent years. With its excellent toughness, high strength, high transparency, and excellent environmental performance that it can be recycled and reused, and does not produce harmful gases when burned, it has gradually been greatly appreciated by consumers and producers. Green ignorance; conform to the trend of environmental protection. PET sheet has the following main characteristics: 1. It has excellent transparency and smoothness, and has a good display effect. 2. Excellent surface decoration performance, can be printed without surface treatment, easy to emboss patterns, easy to metal treatment. 3. Has good mechanical strength. 4. Good barrier properties to oxygen and water vapor. 5. Good chemical resistance, can withstand the erosion of various chemical substances. 6. It is non-toxic and has reliable hygienic performance. It can be used for the packaging of food, medicine and medical equipment, and can be sterilized by gamma rays. 7. It has good adaptability to environmental protection, and can be recycled and reused economically and conveniently; when the waste is incinerated, it does not produce harmful substances that endanger the environment. The thermoforming performance is good, which is equivalent to ordinary PVC sheet, and PET thermoforming products with excellent performance can be obtained by vacuum forming; PET sheet is considered to be an ideal packaging material that meets the requirements of environmental protection. Performance parameters: 1. Density 1.33g/cm Oxygen permeability 4-4.5cm*mm/(m*24h*0.1mpa) 2. Tensile strength longitudinal 53MPA moisture permeability 3G*mm/(M*24H); transverse 53MPA maximum operating temperature is nearly 70 degrees 3. The elongation at break is 250% longitudinally and 250% laterally 4. Heating dimensional change longitudinal 5% transverse 5%
"PVC transparent film sheet PVC-TM-02" parameter description Is it in stock: Yes Certification: ROHS, REACH Material: PVC Processing method: Calendering method Type: Thermoplastic Model: PVC-TM-020 Specifications: 0.2mmx760mm Trademark: Dan Mason Packing: cardboard or carton Yield: 100000000 Detailed introduction of "PVC transparent film sheet PVC-TM-02" PVC film sheet The full name is Polyvinylchlorid, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc. PVC can be divided into soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for the surface of floors, ceilings and leather, but because soft PVC contains softeners (this is also the difference between soft PVC and hard PVC), it is easy to become brittle and difficult to store, so its scope of use is limited. Hard PVC does not contain softeners, so it has good flexibility, easy to form, not easy to be brittle, non-toxic and pollution-free, and has a long storage time, so it has great development and application value. The essence of PVC is a vacuum blister film, which is used for surface packaging of various panels, so it is also called decorative film and adhesive film, and is used in many industries such as building materials, packaging, and medicine. Among them, the building materials industry accounts for the largest proportion, at 60%, followed by the packaging industry, and several other industries with small-scale applications. PVC is a polyvinyl chloride plastic with bright color, corrosion resistance, firmness and durability. Due to the addition of some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process, its products generally do not store food and medicine. The optimum molding temperature of PVC is 170â??-180â??, that is to say, the melt temperature is around 170â??-180â??. At this temperature, PVC becomes a viscous fluid state, and its physical properties reach the highest level. Thickness: 0.15MM-0.5MM Color: transparent Features: Cold resistance, low toxicity, etc. Uses: screen printing/pad printing/offset printing, high frequency voltage and sewing. Widely used in handbags, cosmetic bags, stationery fabrics or accessories, toys and gifts, etc.
"Mat black PVC film sheet roll PVC-MSH-015" parameter description Is it in stock: Yes Certification: ROHS, UL, REACH Material: Polyvinyl chloride PVC Processing method: Extrusion Type: Thermoplastic Model: PVC-MSH-015 Size: 0.15 Brand: Dan Mason Packing: Carton or stretch film Color: Double Sided Matte Black Yield: 100000000 "Mat black PVC film sheet roll PVC-MSH-015" detailed introduction Matte black PVC film sheet roll PVC membrane PVC (polyester fiber type) membrane material Classification According to the intensity level, it is divided into grades Explain that the fabric substrate of PVC film material should be polyester and polyamide fiber fabrics. The coating is mainly polyvinyl chloride (PVC) resin, and the weight of different coatings should be between 400 and 1500g/m2 according to functional requirements. PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and should have self-cleaning properties. Selection points 1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and the surface should have self-cleaning properties. 2) After the PVC film material reaches the melting point in the fire environment, a melting hole will appear, and the boundary of the melting hole will burn and spread, but no open fire will be generated. According to my country's GB8624 "Classification Method of Combustion Performance of Building Materials", it is designated as B1 grade flame retardant material.
Printing grade frosted PC film Suitable for special printing, helmets, signs, nameplates, protective covers, etc. Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, and backlights
"PVC transparent film sheet PVC-TM-025" parameter description Is it in stock: Yes Certification: ROHS, REACH Material: PVC Processing method: Calendering method Type: Thermoplastic Model: PVC-TM-025 Specifications: 0.25mmx760mm Trademark: Dan Mason Packing: cardboard or carton Yield: 100000000 Detailed introduction of "PVC transparent film sheet PVC-TM-025" PVC film sheet The full name is Polyvinylchlorid, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc. PVC can be divided into soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for the surface of floors, ceilings and leather, but because soft PVC contains softeners (this is also the difference between soft PVC and hard PVC), it is easy to become brittle and difficult to store, so its scope of use is limited. Hard PVC does not contain softeners, so it has good flexibility, easy to form, not easy to be brittle, non-toxic and pollution-free, and has a long storage time, so it has great development and application value. The essence of PVC is a vacuum blister film, which is used for surface packaging of various panels, so it is also called decorative film and adhesive film, and is used in many industries such as building materials, packaging, and medicine. Among them, the building materials industry accounts for the largest proportion, at 60%, followed by the packaging industry, and several other industries with small-scale applications. PVC is a polyvinyl chloride plastic with bright color, corrosion resistance, firmness and durability. Due to the addition of some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process, its products generally do not store food and medicine. The optimum molding temperature of PVC is 170â??-180â??, that is to say, the melt temperature is around 170â??-180â??. At this temperature, PVC becomes a viscous fluid state, and its physical properties reach the highest level. Thickness: 0.15MM-0.5MM Color: transparent Features: Cold resistance, low toxicity, etc. Uses: screen printing/pad printing/offset printing, high frequency voltage and sewing. Widely used in handbags, cosmetic bags, stationery fabrics or accessories, toys and gifts, etc.
PVC (polyester fiber) film material Classification According to the intensity level, it is divided into grades Explain that the fabric base material of PVC film material should be polyester and polyamide fiber fabric. The coating is mainly polyvinyl chloride (PVC) resin. According to the functional requirements, the weight of different coatings should be between 400 1500g/m2. The surface layer should be polyvinylidene fluoride resin (PVF) and polyvinylidene fluoride resin ( PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet eroding ability during the warranty period, and should have self-cleaning performance. Selection points 1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet eroding ability during the warranty period, and the surface should have self-cleaning performance. 2) When the PVC film material reaches the melting point in a fire environment, a molten hole will appear, and the boundary of the molten hole will burn and spread, but no open flame will be produced. According to my country's GB8624 "Classification Method for Combustion Performance of Building Materials", it is designated as a Class B1 flame-retardant material. 3) The color, light reflection and transmittance of PVC film materials should meet the requirements of the following table. Film material type Film surface color Light reflectance (%) Film surface transmittance (%) PVC film material Milky white, translucent 75 85 613 Color 45 55 4 6 4) The main performance comparison of four different surface materials of PVC film materials is shown in the table below. Main performance: PVC film material on the surface of polypropylene resin, PVC film material on the surface of PVDF can be spliced PVC film material on the surface of PVDF not spliced, PVC film material on the surface of PVF-film Manufacturer warranty period 3-7 years 10 years 10 years 10 years Aging resistance low fair good good UV resistance low fair good good Corrosion resistance low fair good good Softness good good good good Foldability Foldable Foldable Foldable Unfoldable Self-cleaning performance low good very good very good Splicing method Direct splicing Polishing or pasting splicing strip splicing Polishing or pasting splicing strip splicing Material price low high high high
Transparent PC sheet, thickness 0.7, 0.8, 1.0, 1.2, 1.5, etc., width 915mmx1830mm It can be used for printing as a base plate, and can also be used as a window, etc. Complete specifications, welcome to inquire
There are mainly coarse sand, fine sand, double gloss, single gloss, single mirror sand, etc. can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetics, food, clothing, stationery, hardware products And other high-end packaging, can also be used for silk screen printing, light boxes, picture albums, folder covers, album covers, etc.
Product Feature: HDPE Masking Tape Plastic Drop Sheet Roll Strip 1,Corona treatment . 2,Longitudinal easy to tear, and easy to use by hand. 3,Used a wide range of paint industries,include: Automotive, House, Construction, Shipbuilding and etc. 4,Using advanced folding way, product appearance small volume, convenient movement. 5,Can match dispenser, easy to use. Product Specification TBN1-1 300mm*33m TBN2-1 550mm*33m TBN3-1 1100mm*33m TBN4-1 1400mm*33m TBN5-1 1800mm*33m TBN6-1 2100mm*15m TBN7-1 2400mm*20m TBN8-1 2700mm*20m
Paint Adhesive Masking Protection easy-to-cut extremely smooth to cut tape-resistant tape can be repositioned The special structure of plastic film is composed of three layers, which increases the moisture absorption function and prevents the whitening caused by moisture watertight, tear resistant Electrostatic treatment- adapts tight to the surface, Reduce dust pollution perfect paint adhesion heat resistant up to 120 C The Packing Dispenser Box perfect protection against dust until use, less rework of finish Preserve electrostatic adsorption Convenient stacking and clean storage Products description Material HDPE Thickness 8-18mic Color transparent, white, blue and others overlapperd width 95cm Temperature resistance of film 120 C Statically charge Yes
Paint Adhesive Masking Protection easy-to-cut extremely smooth to cut tape-resistant tape can be repositioned The special structure of plastic film is composed of three layers, which increases the moisture absorption function and prevents the whitening caused by moisture watertight, tear resistant Electrostatic treatment- adapts tight to the surface, Reduce dust pollution perfect paint adhesion heat resistant up to 120 �°C The Packing Dispenser Box perfect protection against dust until use, less rework of finish Preserve electrostatic adsorption Convenient stacking and clean storage Products description Material HDPE Thickness 8-18mic Color transparent, white, blue and others overlapperd width 95cm Temperature resistance of film 120 C Statically charge Yes
Popular Overspray Masking Film is a clear HDPE protective sheet, treated to ensure paint adsorption of both solvent and waterborne paints specific for vehicle painting jobs. The masking film has an excellent paint adsorption due to corona treatment, and it clings to the car body and easy to cut due to electrostatic process. Temperature resist as high as 120 The whole vehicle is covered, and the operation is simple and labor saving. By using the Aosheng mobile drag film tool covering can be done by one person.
Product:Biodegradable agriculture mulch film Material:PLA+PBATÂ (raw material made from plant) Width:0.5 meter~4 meter (1000mm /1200mm/1500mm/1600mm) Length:20m-2000m or as your request. Thickness: Min 8 micron Specification: 600mm*10um, 800mm*10um, 900mm*8um, 1200mm*10um, 1800mm*12um, 2200mm*15um Color: Black and white MOQ: 500kgs (Offer sample for quality checking) Package: Packed by carton or package in rolls or as your requirement Process type: Blow molding Degradation: 100% biodegradable & 100% compostable Delivery: About 10-20 days according to your quantity Usage: Agricultural cultivation. Suitable for sowing, storage of green feed, edible fungus cultivation etc. Application: The film is biodegradable in soil and has an average life span of 1 24 months, depending on the climate and temperatures. Applications with excellent test results for Biodegradable mulch film: 1. Tomato, lettuce, potatoes, sweet potato, onion, edible fungus, melon, cabbage, squash, lettuce, strawberry, vines, cotton, millet, peanut, corn 2. Flowers and plants Degradation Time: It can be fully degraded within 90-180 days under composting conditions, without toxic and harmful things, effectively preventing white pollution and being friendly to environment. Certificate: European EN13432, American ASTM-D6400, Australian AS4736 Precautions: The shelf life of the product is about 12 months, stored in a cool an dry place, avoid direct contact with high temperature objects,liquids or chemical objects.
Hdpe sheet is a kind of engineering plastic sheet, the raw material is high density polyethylene. Depend on the different molecular weight, it could be produced into pe 100, pe 500 etc. The sheet of hdpe has high shore hardness and perfect processaility. It's good mechanical property and balanced impact & stiffness catch most clients' attention. The sheet has high wear resisting and low water absorption. The sheet has various of catagories, up to the color or layer it could be divided into single color sheet, double color sheet, triple color sheet and up to the surface, it could be divided into clear surface sheet, orange peel surface sheet, leather textured sheet, embossed surface sheet and matte surface sheet. The sheet is widely used in advertising pad, kids amusement equipment, roller skating rink panel, rink barriers, ground protection mat, truck bed lining and special parts, machined parts etc.
Product: Customized Machine-Grade PET Strapping. Any kind of specifications can be produced. The details of one of the specifications are as follows. Brand: Zoeban Specification: 2512 Tensile Strength: 12300N Length of each roll (20kg): 500m
Acrylic Sheet Production Introduction: Poly(methyl methacrylate) (PMMA), also known as acrylic, acrylic glass, or plexiglass, as well as by the trade names Crylux, Plexiglas, Acrylite, Astariglas, Lucite, Perclax, and Perspex, among several others (see below), is a transparentthermoplastic often used in sheet form as a lightweight or shatter-resistant alternative to glass. The same material can be used as a casting resin or in inks and coatings, among many other uses. Although not a type of familiar silica-based glass, the substance, like many thermoplastics, is often technically classified as a type of glass (in that it is a non-crystalline vitreous substance), hence its occasional historic designation as acrylic glass. Chemically, it is the synthetic polymer of methyl methacrylate. The material was developed in 1928 in several different laboratories by many chemists.
KMNPack offers three kinds of laminated film webs specially developed for sterile madical device packaging purpose.
Features: - Used pharma grade raw material - High impact strength and high rigidity - Aging resistance, excellent formability, chemical resistance, corrosion resistance, non-toxic, no smell Standards: Meet ISO9001, GMP standard and passed SGS testing
KMNPack Barrier Film Easy to remove ,reduce cross infection from infectious spray; Convenient dispensing with special design; Applicable to almost any surface without leaving any residue.
Acrylic Pmma Sheet Production Introduction: Also known as acrylic glass and lucite, our extruded and cast acrylic sheets and panels. Durable and adaptable, We have expansive selection of clear and colored acrylic sheets. Acrylic is about 17 times more impact resistant than glass. Our plexiglass panels are easily machinable, bond well with acrylic glues, and can be polished by hand, flame, or machine. They have a shiny, glass-like appearance, are suitable for printing, and cost-effective when compared to glass or polycarbonate. We offers acrylic plexiglass sheets and panels in clear, black, white, and a spectrum of colors. They can be manufactured to be bullet-resistant, mirrored, non-glare, matte finish, UV filtering, or frosted.
