Shanghai Kuhoo Polymers Co., Ltd (TPE TPR TPV) TPE, TPR(Thermoplastic Elastomer or thermoplastic rubber) Is a kind of high elasticity, high strength, high elasticity rubber, also has the characteristics of injection molding of thermoplastic rubber. Non-toxic and safe, widely hardness, excellent coloring, soft touch, weather resistance, fatigue resistance and temperature resistance, excellent processing performance, not curing, can be recycled to reduce costs, It not only can be the second injection molding with adhesive coated PP, PA, PE, PC, PS, ABS and other substrate, and also be formed separately. Injection, extrusion, blow molding, overmolding are all suitable. Features of KUHOO TPE raw material, tpe material, TPE compound, TPE granule, TPE resin, TPE pellet or thermoplastic rubber or Thermoplastic Elastomer: 1. Wide range of hardness; 2. Non-sticky, 3. Easy to process and color; 4. Overmolding to PA,PP, PE, ABS; 5. Superior Resilience; 6. Excellent brittle temperature; 7. Environmental-friendly; 100% recyclable; REACH RoHS compliance; 8. Low odor and fogging; 9. Versatile processing capabilities, such as injection, blow molding, extrusion, co-extrusion. 10. Excellent UV and aging resistance
TPE (Thermoplastic Elastomer) Is a kind of high elasticity, high strength, high elasticity rubber,, also has the characteristics of injection molding of thermoplastic rubber. Non-toxic and safe, widely hardness, excellent coloring, soft touch, weather resistance, fatigue resistance and temperature resistance, excellent processing performance, not curing, can be recycled to reduce costs, It not only can be the second injection molding with adhesive coated PP, PA, PE, PC, PS, ABS and other substrate, and also be formed separately. Thermoplastic elastomer has thermoplastic processing performance, but also has the physical properties of vulcanized rubber. It can be described as a combination of advantages of plastic and rubber. TPV (thermoplastic vulcanizate) is also known as elastomeric alloys (EA). TPVs are formed in a reactive compounding process that is usually the combination of a polyolefin (Polypropylene or Polyethylene) with an elastomer (SBR, NR, EPDM, NBR or Butyl). In a reactive compounding process, the elastomer is completely cured. This dynamic vulcanization process in TPV production generates the webbed network in the elastomer domain while still retaining melt- processing capabilities. TPV consists of micron size cross-linked elastomer particles dispersed throughout a continuous matrix of thermoplastic material. Because of its thermoplasticity and melt flowability, TPV can be processed on standard thermoplastic equipments (such as injection molding, extrusion, blow molding, calendaring, overmolding etc.) with the efficiency and economy associated with thermoplastic materials. Further, the scrap from these processes can be recycled. OEM is welcome. Email:shanghaikuhoo@163.com KUHOO TPE/TPV features 1. Wide range of hardness; 2. Non-sticky, 3. Easy to process and color; 4. Overmolding to PA,PP, PE, ABS; 5. Superior Resilience; 6. Excellent brittle temperature; 7. Environmental-friendly; 100% recyclable; 8. Low odor and fogging; 9. Versatile processing capabilities, such as injection, blow molding, extrusion, co-extrusion. 10. Excellent UV and aging resistance
UHMWPE is the abbreviation of ultra high molecular weight polyethylene. This is the most excellent quality available for use in harsh working environments and in a variety of applications. Applicability is very good in many highly difficult applications. UHMWPE is a product that have many advantages that not to many plastics and be used many fileds. The advantage of UHMWPE as follows: 1. Wear-resistance The wear resistance of UHMWPE ranks first in plastic, and exceeds that of certain metals. Material UHMW-pe MC nylon PA-66 PTFE POM HDPE PVC Carbon steel Brass Mortar wear index 1 4 5 5 6 10 10 7 27 2. Impact resistance The impact strength of UHMWPE at the top of all engineering plastic. Material UHMW-PE PA 66 PC ABS PBT Unit(KJ/m2) 140 9 80 15 5 3. Self-lubrication UHMWPE has a very low coefficient of friction(0.05-0.11),so that it has a very good self-lubrication. 4. Corrosion resistance UHMWPE has excellent resistance to chemicals,in addition to the strong oxidizing acid,in a certain temperature and the concentration range of competence of various corrosive medium (acid,alkali,salt) and various organic media. 5. Absorb impact energy UHMWPE has excellent shock absorption,impact energy absorption value is the highest in all plastic,and it has a excellent effect of the silencer. 6. Low temperature resistance UHMWPE has excellent low temperature resistance,and can be used as a low temperature component in the nuclear industry because of its still have the ductility at low temperature (-269?). 7. Hygiene and no toxicity 8. Not easy adhesion UHMWPE surface adsorption force is very weak, its ability to resist adhesion to the plastic is next only to the best PTFE, so the surface of the product and other materials are not easy to stick. 9. Hydrophobic property UHMWPE water absorption rate is very low, generally less than 0.01%, only 1% of PA6, and therefore do not need to dry before processing. 10. Tensile strength As the UHMWPE has the necessary structural characteristics of the super tension orientation, so there is no comparable ultra-high tensile strength, its tensile strength up to 3 - 3.5GPa.
Khunwong provides customized pvc resin material according tocustomer requirements especially for pvc wire applications. It's reliability andenvironmental protection, which can reach eu & ul standards. The advantages > stable physical performance > anti-aging > rosh certification, low halogen > low smoke, low hci, no toxicity Color: It is available in clear, transparent, opaque and specialty color as customer required
Pvc less than 200 ppm
zinc coating: 30-275g/m2 coating thickness: 5-25micron width: 30-1500mm thickness: 0.1-1.0mm coil weight: 2-10 MT coil ID: 508/610mm Package: seaworthy standard package
Plastic raw material nylon6 nylon66 for rejection for plastic product 25kg/bag
POE is the use of a metallocene catalyst, ethylene and octene-situ polymerization of a thermoplastic elastomer, POE plastic of PP has excellent toughening effect, and PP, calcium carbonate has a good compatibility, but the content of the plastic POE should be controlled at 20% or less.
Advantage 1. Good quality and reasonable price 2. Poteonods no smell adurless 3. It can replaced original plastic material, sometimes it can replace new material HDPE has several properties that make it ideal as a packaging and manufacturing product. It's stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer. Also, HDPE leaks no toxic chemicals into the soil or water. HDPE is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts. Due to changeable of the plastics price, maybe the price on the website is different from the real price, so pls conatct me to get the newest price before you place an order. If needed more physical properties of materials and environmental certification, please contact me. Thank you for your cooperation and support! The Company with adequate supply, variety, reasonable prices. There are other grades of raw materials can not be detailed, specific issues, please contact me by letters or calls! The company has long-term supply of PA / ABS, PP, ABS, PA6, PA66, PBT, PEI, PET, HDPE, PVC, LDPE, LLDPE, etc, welcome enquiry. Performance project Test conditions test data data unit basic performance MFR ASTM D-1238 20 g/10min density 0.956 g/cm3 Mechanical properties Tensile elongation at break ASTM D-638 350 MPa tensile yield strength 29 MPa hardness 65 shore D IZOD impact strength 30 J/m tensile breaking strength 25 % 1%secant modulus 1300 MPa thermal properties vicat softening point ASTM D-1525 128 c Brittle temperature
Ja204# polyurethane resin is a polymer material developed material¡ê¬ room temperature curing¡ê¬ two-component, with low viscosity, small odor, soft, transparent glue. For it¡¡¥s good advantages of wear resistance, yellowing resistance, uv resistance and never hardens, it is widely used for outdoor application. 2kg/set or 10kg/set packing
Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories: specific wound type series (s-sm)and hand lay-type series (s-hm) Selling units: Single item Single package size: 1x1x1 cm Single gross weight: 1.2 kg
Pe plastic granules virgin or reycled for bags, film... 25 kg bags
Plastic virgin recycled for bags 25kg bags
Ps plastic granules virgin recycled 25kg bags
Hdpe granules virgin and recycled plastic In 25kg bags
Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,
Medical cable, extrusion, cable, wire, connector, cable assembly, wire harness, pvc, hdpe, pp, ldpe, pcb, pcba, injection mold, injection molding, fixture, machining part, stamping part, tube, catheter, wire harness, release paper, release liner, flim, tape, silicone foam, sponge.Export and shipping
PVC resin, white powder, CAS No. 9002-86-2, HS Code 3904109090. Models SG-3, SG-5, SG-7, SG-8 by Calcium Carbide method, SG-3 is suitable for cable and wires, films, high-grade artificial leather, etc. SG-5 is suitable for the processing of hard products such as profiled materials, pipes and hard plates. It can also be applied to film, leather cloth, plastic sandals, soles, and various soft products. SG-7 is suitable for the processing of transparent sheet, packaging, foam board and other products. SG-8 is suitable for packaging transparent sheets, plates, elbows of high-strength pipe fittings and other products.
The thickness of PC film is between 0.125 and 1.0. There are smooth and frosted, and there are coils and sheets. There are sheets and coils. The sheets are one by one. The coil has a certain width and a length of several hundred meters. long; The thicknesses are: 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, 0.5, 0.7, 0.8, 1.0. Among them, 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, etc. are mainly coiled materials, while other thicknesses are mainly sheet materials PC sheet is mainly used in optical electronics, medical equipment, high-speed railway aviation, printing anti-counterfeiting, LED display, automotive industry and electronics, electrical industry, liquid crystal display and industrial machinery parts, plating mirror, various signs, printing, membrane switch backlight Window lenses, special printing, helmets, signs, nameplates, protective covers, power system insulation, disk drive insulation, keyboard insulation, TV/display insulation, computer motherboard insulation, electronic components, electrical enclosures, switch panels, and other electronic products , Junction boxes and charger shells, automotive instrumentation and panel printing with flame-retardant requirements, electronic packaging, luggage, sports equipment, instrument panels, auto parts, controller panels, membrane switches, electrical products, etc., optical accessories, optical displays , Flat panel display, high-speed rail aviation, medical equipment, lighting lamp film, surgical lamp film, electrical panel, nameplate, protective mask, sun hat, sunglasses, mobile phone, MP3, MP4, DVD, etc.
PLA Raw Material Specification: MOQ: 1 ton Delivery time: within 15 days Material: Corn Starch Application: Factory Production Color: Black
