Fully automatic oil tester - iij series This oil tester could testing the voltage of the insulating oil.
This purifier can remove the tiny impurity dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life time of engine oil and engine as well. This kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile. 1. High precision stainless steel net is used as purifying material which is corrosion-proof, high temperature resistant and has a good mechanical strength with longer life time, capable of removing oils' tiny impurity in more depth. 2. High accurate and effective removal of water content in oil, as well as rest of harmful gas. 3. Capable of recovering the clarity of engine oil back to the clarity of new oil. 4. This purifier adopts both manual and auto disposal of residue, which operates fast, stably, reliably and safely. 5. Strong condensation technology is applied to the drawn out mixed gas which increases effective output and extend life time of vacuum pump. 6. Precision oil pumps for designated purpose are used, which have low noise and environmental regulatory compliance is well met. 7. Imported parts are used for all electric system which ensures operation of the equipment with high performance. Item unit zly Flow rate kg/d 8000 Working pressure mpa -0.095~0.4 Temp. Control range centi 80 centigrade~180centi Working noise db(a) f_80 Heating power kw 72 kw Inlet/outlet pipe diameter mm 42 Overall size mm 3850*2250*2320 3500*1750*1850 3500*1750*1850
After many years of study, we design hangyu dyjc on-line purification plant which is mainly used in the field of the turbine and the lubricant set. We can satisfy our customers because of kinds of purification way. There is particular patent technique of double-system in vacuum. Their characteristics are: 1. Dehydration in vacuum which can reduce water content to less than 50ppm in oil. 2. Particular fluid control system (vacuum pump will not spew oil in the long time function). 3. Credible double system design (one spare, one apply). 4. Auto-control or manual-control in the field and remote-control junction port has been left to upgrade the system. 5. De-acid and de-color by the use of the collection-dehydration port. The system runs credibility and has high stability. You can auto-control or manual-control the equipment on the field or remote. Features of product 1. The on-line set for lubrication designed by our company have obtained patent of country (patent no. Zl200420061085.6). The system include two grade vacuum pump and two oil pump, one is in use and the other is spare, so that inspect easily. 2. The oil treatment effect of on-line purifying set could less than 50ppm. 3. The plant leaves dcs long-range control so that customers choose various ways to control such as manual, automatic and long-range control. 4. The plant also has features of zjc-t series oil-purifier for turbine oil and jt collecting-dehydration oil purifying equipment. Veneer case
International maritime organization concerning the marine environment protection committee conferred upon it by international convention for the resolution imo. Mepc. 107(49) adopted on 18 july 2003. The resolution made the fully new requirement referring to 15ppm bilge treatment plant in annex i of . The ywc type ows developed for this is the high-tech newest product which can effectively dispose all kinds of bilge water including fuel oil, high-density residual oil and emulsion mixture combined with black ferric oxide and surfactant. There are nine types of specifications in ywc series.The smallest type is ywc-0.25 which can be installed on ship less than 1000dwt.The biggest type is ywc-5.0 which can be installed on ship more than 300 thousand dwt.All of type drawings and devices are approved by china classidication society for type test.The types and specifications are as follows:we can also design and produce the special type of oily water separator according to the demands of our customers.This ows can also be used in industrial and petroleum, besides in ship vessels.
With the avantages of being compact in structure,simple in operation,convenient in maintanance and low in application cost,the series are new necessary products used in power mining enterprises,especially when their oil are used in electric equipments,such as transformer,mutual inductor and switch. The purifier can remove free water,free air and particulate contamination,and can make the filtered oil reach or be closed to the standard of the new oil.The product could also be operated together with BJ series to treat aging and waste oil,so it is assistant without doult. Features of Product 1. Simple in operation,convenient in moving and high efficient in oil treatment. 2. As the new technology, vacuum-segregating (Patent No. ZL200420061085.6) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect. 3. Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life. 4. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. 5. With advantages of no leakage,low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory. 6.In order to meet customer's needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good. veneer case
Utilized the domestic and foreign technique and innovatively designed,the filter has aga good ratio of price performance.With the adbantages of high working vacuum, high filtration speed, oil quality protection,the filter advanced the oil treatment technique and equipment performance and once can taise the puncture voltage up to over 35v. The series products can be installed by sealed regular or moveable with a trailer,so it is suitable to treat oil,fill oil in vacuum chamber and circulating dry hot oil when latfe transfotmer is being installed overhauled.Moreover,we can also provide customers with three-stage high-vacuum oil-filter so as to get higher vacuum and to meet your higher requirment gor oil treatment. This series have one pot with two stage vacuum segregating space,it come into being different pressure so as to keep oil line balance between two stages. The pump of thie product is adopted vacuum imported from Europe,which have preceding level in the world,and with high air pump speed so as to get high working cacuity. Features of product 1.This series have one pot with two-stage vacuum-segregating space, it come into being different pressure so as to keep oil line balance between two stages. 2. The pump of this product is adopted vacuum-pump imported from Europe, which have preceding level in the world, and with high air pump speed so as to get high working vacuity. 3.As the new technology, vacuum-segregating (Patent No. ZL200420061085.6) employs particular spinning disk and stainless steel machine with dehydration and air pump so that enlarge the area of segregating and coming to three-dimensional evaporation. 4.Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life. 5. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil, mount the equipment to prevent superhigh and superlow oil level. Spurting oil phenomena is never appeared. (Spurting prevention Patent No. ZL200420060973.6) 6. As the clientí»s requirement, they could choose equipment which their components were all or partly imported from overseas. Include touching screen and flow gauge is can be selected according to customers. This series could meet different kinds of customerí»s need. 7.It equips filter assemblies imported from U.S.A. and it has large filtering area, strongly absorbent-dirt capability, high filtering precision. veneer case
Over time in long-term running of industrial equipment, it's inevitable that water, and solid granules enter the lubricating system. This will lead to the erosion and wear of metal components and reduce the performance of lubricating oil to affect the efficient running performance of the unit group. The TY series oil purification device is specially designed and produced for solving these problems.
100% interchangable with SPM TWS600S Rated Max.Brake Horsepower ..............600BHP(447Kw) Maximum Rod Load ..............................100,000#(43,360kg) Stroke Length ........................................6"(152.4mm) Gear Ratio .............................................4.6:1 Lenth ......................................................50.25"(1276mm) Width .....................................................52.93"(1344mm) Height ....................................................23.88"(607mm) Weight Dry(Approx) ...............................4,600#(2086kg) 100% interchangable with (SPM TWS 600S)
100% interchangable with dowell pg05 Maximum input power :.................................300 bhp Max speed of spindle :..................................350 rpm Maximum revolution of pinion shaft :.............1510 rpm Max load of connecting rod :..........................5085 n Stroke :..........................................................127(5") Gear ratio :.....................................................1:4.32 Gear shape :..................................................Double arc gear 100% interchangable with dowell pg05
100% interchangable with spm tws2000. Rated max.Brake horsepower .......2000bhp(1491kw) Maximum rod load .......................225, 000lbs(102, 060kg) Stroke length .................................8"(203.2mm) Gear ratio ......................................6.353:1 Lenth ..............................................89-3/4í¦(2280mm) Width ..............................................59-3/4í¦(1518mm) Height .............................................44-1/4í¦(1124mm) Weight dry(approx) .......................11750#(5330kg).
Knc piston model of mud pumps: Emsco: f-series fa-series fb-series oilwell: a-series Gardner denver: pah-series tee-series pz-series national: p-series Ideco: t-series qingzhou: 3nb-series.
Specifications: Colour: Transparent or slightly turbid Specific Gravity(204/'C): 0.9360--0.9395 Reflective Index(20'C): 1.5170--1.5220 Iodine Value: 163--173 Spaonification Value: 190--195 Moisture & Admixture (max): 0.3% Free Fatty Acid (max): 4% Worstall's Heat Test (max): 7.5minutes Model Beta Tung Oil Test: Negative (no crystalizion) Packing: 190kg/drum. Packing: 190kg/drum.
The plunger of the pump are all with high hardness alloy spraying technology and ceramic technology, its surface hardness can be achieved HRC65 , which raising the plunger life.
Hw-7 is a heat-resistant aging, environmental protection, non-cationic, non-amine, two performances antistripping agent. Solve the antistripping agent prevalent poor heat aging and environmental pollution problems, improving the aging resistance of asphalt, waterproof and antistripping of asphalt. The two performances peculiarity of the product can effectively solve antistripping agent and stone and asphalt compatibility problems, it's a new generation of antistripping agent.
Main characteristics Novel structure and compact design make it easy to install and transfer Main parts adopts international famous brand product with credible capability Lower running cost high aggregate and asphalt weighing accuracy It can realize auto control, semi-auto control and manual control. Aggregate supply system adopts modularization structure and frequency conversion timing, making material delivery smooth. Without phenomenon such as block, obstruct and so on. The heat up area of Dryer drum uses patent technology, which can make full use of heat energy. Dressed heat preservation material to reduce heat loss and have aggregate material drying effectively. Mine material, dust and asphalt weighing systems which adopt three sensors without disturbing data collection can calculate exactly, steadily, credibly and efficiently. The dust cleaning system of whole machine are designed on a basis of meeting the discharge request of environment std for sure at the clientsí» request and local environment defense condition.
Stabilizer with rollers (rotary reamer)/ tricorn reamer Rotary reamer is designed for various reams in drilling operation. Especially it can perform the double functions of centralization and reaming when drilling in very abrasive formations. This is a versatile tool which can be used for different hole sizes ranging from 4-5/8·=to 26·=by selecting proper rollers and simply adjust the blocks. In addition, its service life can be extended by replacing new rollers when the old rollers are worn and become smaller. The body is made of modified alloy steel, fully heat treated to 285f+341 brinell hardness and 54j minimum impact strength. Connections are phosphated, coated with thread dope and equipped with thread protectors, and are accord with api standard. Three different types (t, f and b) of rollers are offered: Type t: milled, machined with sharp hard faced teeth, for soft formations. Type f: milled, machined with flat hard faced teeth, for medium hard formations. Type b: equipped with pressed-in tungsten carbide buttons, for hard formations. Sea worthy package
Stabilizer blank Forgings made from AISI 4145H or AISI 4145H Modified for stabilizers. Heat treated and machined as requirements from the customer. Can be with or without spirals. Size: Up to 26 working OD Material: AISI 4145H Mod, AISI4145H or under requirements. After heat treatment and machining, the Hardness is HB290-340, Strength is b b 965 Mpa (D2 160mm) b b 931 Mpa (D2 160mm) Impact strength is AK 54J. We inspect every piece by cutting a piece from its body, every forging should have an inspection report with delivery. Stabilizer with Hardfacing & thread The Stabilizer manufactured by our factory has three types according to its body/mandrel, The mechanical performances of the stabilizer are complied with API Spec.7.: 1.Integral Blade Stabilizer 2.Interchangeable Sleeve Stabilizer. The body (or mandrel) is made of modified alloy steel, and fully heat treated for prospective hardness, strength and impact strength. Through ultrasonic testing and magnetic testing, it is proved up to flowing grade. Material 40CrMnMo(4145H) Hardness HB290-340 Strength b b 965 Mpa (D2 160mm) b b 931 Mpa (D2 160mm) Impact strength AK 54J. The connections are up to API standard which have stress relief grooves and are cold rolled. The flank of thread is phosphatized or plated copper, coated with thread dope and equipped with thread protectors. It is mainly the spiral blades (usually three blades, also can be four blades under the customer's require) , which rub against the borehole wall. The working surface of the blades is hard faced. The hardfacing type we can provide are HF1000, HF2000, HF3000, HF4000. It is preferred operation that tungsten carbide inserts are cold inserted into the working surface of blades including its bevels. Braze welding tungsten carbide grains are also adopted according to customer's require.
Oee's f-series mud pump is horizontal triplex single acting piston pump .Duration the process of oilfield deep well and super deep well can circuit drilling fluid , wash bottom of well, take along cuttings, cool, lubricate bit and consolidate sidewall, with the high pressure jet bit can be fit for braking cuttings, enhance drill well speed; meanwhile, also can act as driving bottom drilling tool by providing flowing fluid . The pump has features of advanced structure, small volume , used reliably , preferable exchange and easy maintenance , etc. The mud pump consist power part and hydraulic part. Power part include: frame, small gear shaft, bent axle, crosshead, intermediate rod. Hydraulic part include: hydro cylinder assembly, valve assembly, cylinder liner, piston and suck &bleed manifold.
Oee ceramic liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a ceramic inner sleeve. We provide zirconia(zro3) sleeves as well as alumina(al2o3.) sleeves., of which ziconia exhibits better impact strength, higher hardness and be honed to finer surface finishes than alumina.
Oee offers a full line of pistons for duplex and triplex mud pumps. All api types are available. Among these are: bonded urethane pistons and pistons with replacement rubbers. This is a piston with replacement rubbers .It includes plate, snap ring , piston hub and rubber. The hub is formed from high grade steel. (40cr) .The piston rubber is made from specially formulated compounds which are resistant to the effects of heat, oil and water. The multi-ply fabric reinforced backings used in the production of the piston rubbers provide positive, wear resistant seals.
