Mud Pump Pistons

The piston rubber in made from specially formulated compounds which are resistant to the effect of heat, oil and water. The multi-ply fabric reinforced backings used in the production of the piston rubbers provide positive, wear resistant seals. This one piece bonded unit provides the same series of advantages, being resistant to oil and other chemical.

Oee offers pony rods, piston rods and clamps to meet today's tough oilfield requirements. Pony rods Our pony rods incorporate the longer wearing surface to provide the best pony rod for your triplex or duplex pump. Piston rods for triplex mud pumps The piston rods are manufactured to exacting standards to meet todayí»s tough oilfield requirements, available for a wide range of triplex mud pumps. Our piston rods are manufactured from high quality alloy steel.40cr surface is induction hardened for maximum case hardness and core strength - hard on the outside, tough on the inside. Precision ground mirror surfaces meet rigid quality control standards and minimize wear. Piston rods for duplex mud pumps High quality grayloy material is used on all oee duplex piston rods. This corrosion-resistant, high-density, long-wearing surface results in fewer packing changes and longer life for gland bushings and junk rings. Oee rods are furnished with a heavy duty piston lock nut. Clamps Oee offers a full range of clamps for mating the piston rod to the crosshead extension (pony) rod. Machining tolerances are tightly held to assure proper fit and alignment of the adjoining components. Oee clamps are furnished complete with all required hardware.

Our mud pump has 3NB series, F series

Supplier: Industrial products, hand operated pumps in stainless steel, oil circulatory system, CNC turned parts, precision turned parts, refill carts for seal support systems, lubrication equipments
Services: Manufacturer and exporter

Oee's f-series mud pump is horizontal triplex single acting piston pump .Duration the process of oilfield deep well and super deep well can circuit drilling fluid , wash bottom of well, take along cuttings, cool, lubricate bit and consolidate sidewall, with the high pressure jet bit can be fit for braking cuttings, enhance drill well speed; meanwhile, also can act as driving bottom drilling tool by providing flowing fluid . The pump has features of advanced structure, small volume , used reliably , preferable exchange and easy maintenance , etc. The mud pump consist power part and hydraulic part. Power part include: frame, small gear shaft, bent axle, crosshead, intermediate rod. Hydraulic part include: hydro cylinder assembly, valve assembly, cylinder liner, piston and suck &bleed manifold.

Oee ceramic liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a ceramic inner sleeve. We provide zirconia(zro3) sleeves as well as alumina(al2o3.) sleeves., of which ziconia exhibits better impact strength, higher hardness and be honed to finer surface finishes than alumina.

Select type: khf-500 khf-800 khf-1000 khf-1300 khf-1600 khz-9 khl-p-160 specifications model khf-500 khf-800 khf-1000 khf-1300 khf-1600 type triplex single acting piston pumps max. Bore*stroke length mm 170*191 170*229 170*254 180*304.8 in 63/4*71/2 63/4*9 63/4*10 7*12 strokes per minute spm 165 150 140 120 rated power kw 373 597 746 970 1, 194 hp 500 800 1, 000 1, 300 1, 600 gear type herringbone gear ratio 4.286:1 4.185:1 4.207:1 4.206:1 suction manifold mm 203.2 254 304.8 in 8 flgd 10 flgd 12 flgd discharge port mm 102 127 in 4 fem, hrd 5 flgd 5000api o.D of pinion shaft mm 139.7 177.8 196.85 215.9 in 51/2 7 73/4 81/2 key mm 31.75*31.75 44.45*44.45 50.8*50.8 in 11/4íß11/4 13/4íß13/4 2íß2 valve pots valve-over-valve api 5# api 6# api 6# api 7# weight kg 9, 770 14, 500 18, 790 24, 572 24, 791 lbs 21, 540 31, 970 41, 420 54, 170 54, 650

KH-chrome mud pump liners are made with a high chrome iron sleeve in a forged steel hull.The bore hardness is 60 to 67 Rockwell C scales while the hull has high tensile strength of more than 90000psi.Combining the characteristics of chrome with state of the art manufacturing,the liners can withstand mud pressure of up to 7000psi.The life of our KH-chrome liners is proved to generally reach a level of more than 800 hours,which has earned us reputation from worldwide customer

F series mud pump is applicable to the requirement of high pump pressure in oilfield and high pump pressure in oilfield and high displacement technology of well drilling with its soild and compact structure, small volume and outstanding operation performance. F series mud pump has long stroke maintaining operation at lower frequency resulting in enhancing the performance of giving water effectively and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into linepipe. F series mud pump powering side adopts the combined lubrication of forced and flashing lubrication featured with reliable lubrication and adding the operation lifetime of powering part. F series pump is produced strictly according to api spec 7k "the equipment specification of well drilling and repairing", and performed the ex-work test under the specification thereof.