Features 1, high reliability design, efficient brushless motor; 2, the high-performance single-chip control, mature technology, simple operation, high efficiency analysis, analysis of low cost; 3, analysis of the memory speed, temperature, time, work status and display are Automatic control completed; 4, low power consumption, low noise, reliable performance, good stability, easy maintenance, long service life; 5, equipped with electronic locks to ensure the safe use of equipment.
Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Road Marking Paint
Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Road Marking Paint
PTFE Wax for Coating and Ink
Fischer Tropsch wax Grade: Candle grade Usage and Advantage Usage :This wax is Fischer-Tropsch wax can completely replace the pafaffine wax and slack wax applied in the candle industry. End user can reduce the input proportion and save 20% cost . This wax is widely used for cup candle products . Advantages : Less smoke, resistant to burning, more white color , power state easy for production and save the cost .
Scope Automatic freezing point and pour point tester in line with gb / t510, gb / t3535 national standards, the use of a plurality of components of the master microcontroller, automatic cooling, automatic climate control, automatic detection and automatic printout. Features 1, large-screen lcd display, english prompts 2, keyboard control, easy to operate multi-mode control program 3, using the united states imported testing equipment, good stability, high sensitivity, high reliability 4, instruments and equipment imported to take similar detection device can detect trace samples, speed, and high reproducibility of the results 5, automatic freezing point and pour point tester using imported overlay compressor refrigeration systems, cooling speed, depth and temperature cooling effect are better than the same industry 6, reserved for usb communication interface with the host computer communication, ease of centralized management system consisting of Technical parameters 1, the use of the environment: temperature 0 ~ 60 ? relative humidity: = 80% 2, the test holes: two holes 3, temperature range: + 50 ? ~ -45 ? (temperature can be customized according to customer requirements) 4, temperature accuracy:
Scope Automatic freezing point tester of petroleum products according to national standards gb / t510 "oil freezing point" provides design and manufacture. Features 1, large-screen lcd display, english prompts 2, keyboard control, easy to operate multi-mode control program 3, using the united states imported testing equipment, good stability, high sensitivity, high reliability 4, instruments and equipment imported to take similar detection device can detect trace samples, speed, and high reproducibility of the results 5, automatic freezing point tester using imported overlay compressor refrigeration systems, cooling speed, depth and temperature cooling effect are better than the same industry 6, reserved for usb communication interface with the host computer communication, ease of centralized management system consisting of Technical parameters 1, the unit of work: the two groups were detected were detected 2, the cooling temperature: + 50 ~ -45 ? 3, cooling method: imported compressor 4, trace detection: 4ml sample test 5, control: scm control 6, work: automatic measurement, automatic calculation results 8, total power: 800w 9, power supply: ac220v 50hz
Scope Automatic cold filter plugging point tester national standard sh / t 0248 as the basis, using modern advanced technology, mechanical, optical, electronic and computer technology, and can be done automatically test the cold filter plugging point of petroleum products, automatic cold filter plugging point analyzer using optical detection technology, imported compressor refrigeration system ensure the required refrigeration depth. Automatic cold filter plugging point tester reasonable structure, stable performance, simple operation, is the ideal detection equipment. Features 1. High degree of automation equipment, automatic cooling, automatic sample aspiration, automatic detection, automatic save the results, the test process without human intervention; 2, the instrument configuration of two experimental units do parallel test can also detect single group; 3, instrument automation control technology, human-friendly interface, photoelectric automatic detection; 4, instrument with integrated design, to avoid damage due to vibration of the floe and the impact of the test data. 5, the instrument uses photoelectric liquid level sensor can accurately detect the position of the horizontal surface, the cold filter plugging point accurate judgment. 6, the instrument uses a built-in vacuum pump and electronic precision pressure balance system to ensure automatic balancing suction filtration pressure at the set value. 7, the instrument can automatically control the cooling medium and the temperature difference between the sample being tested, to ensure a controlled and uniform cooling rate stable. Technical parameters 1, the temperature measuring range: -45 ~ 50 ?; resolution 0.1 ? 2, the pressure measuring range: 0 ~ 200.0kpa; resolution 1pa 3, the test samples: 2-way 4, temperature measurement element: pt100 5, detection method: a photodetector 6. Refrigeration: refrigeration compressors 7, the control mode: single-chip control 8, the ambient temperature: 10 ~ 35 ?
Scope This instrument conforms to astm d445 standard, the instrument is used to measure the kinematic viscosity of liquid petroleum products (newton liquid) at a constant temperature. Kinematic viscosity is the product of the viscosity of the liquid at a constant temperature and the density of the liquid at the same temperature. Features 1, imported omron temperature controller, lcd, temperature accuracy of ± 0.1 ?. 2, using a hard glass tank, good insulation properties, the specimen was observed clear. 3, using a desktop, one machine design approach, the instrument overall good, easy to use. 4, use of electric stirring device, temperature uniformity bathtub 5, the instrument comes with expert self-tuning capabilities, more precise temperature control Technical parameters 1 power supply: ac 220v ± 10%, 50hz ± 5%. 2 heating power: 1800w. 3, stirring motor: power 6w; speed 1200r / min. 4, temperature range: room temperature ~ 100 ?. 5, temperature control accuracy: ± 0.1 ?. 6, constant temperature bath: capacity, 20l; 7, the use of environment: temperature -10 ? ~ + 35 ?, relative humidity
Scope The instrument complies with gb / t265-88, astm d445 standard, measuring liquid petroleum products (newton liquids) kinematic viscosity, in units of m2 / s, usually mm2 / s in practice. Kinematic viscosity of the liquid at a constant temperature measured kinematic viscosity and density of the product at the same temperature of the liquid. Features 1. Using cascade spiral refrigeration technology, refrigeration speed, high double-loop design, reliability 2, can simultaneously detect two samples, user-friendly operating parallel samples 3, using dewar design, low temperature fogging 4, using split design, easy maintenance Technical parameters 1, cooling mode: compressor refrigeration 2, temperature control mode: automatic temperature control; 3, temperature range: -60 ~ 20 ?; 4, temperature accuracy: ± 0 1 ?; 5, the heating power: 150w;
Scope Petroleum products motion detector according to national standards gb / t265 regulations designed and manufactured for the determination of kinematic viscosity of liquid petroleum products. English lcd screen display, interactive interface, preset temperature, test time and other parameters menu prompts input, design aesthetic appearance, is the introduction of new instruments. Features 1, the lcd screen english display, interactive interface, preset temperature, test time and other parameters, menu prompts input 2, the actuator using advanced ssr, which is characterized by non-contact, no action noise, no spark, vibration resistance, long life. 3, bath heater and draft tube internal parts such as the use of stainless steel, corrosion-resistant and durable. 4, automatic calculation and testing of the capillary constant time average of the product; the high precision temperature control, good accuracy. 5, the introduction of imported xecom us data processing chip, fast and accurate data processing 6-cylinder design, better insulation and protective measures 7, automatic countdown function, automatic calculation results Technical parameters 1, the control temperature settings: room temperature ~ 100 ? 2, the number of samples: 2 3, constant temperature accuracy: ± 0.1 4. Display: lcd 5, results processing: automatic calculation of results 6. Countdown: automatic countdown 7, heater power: 1000w 8, work power source: 220v ± 10% 50hz 9, ambient temperature: room temperature ~ 35 ? 10, weight: 25kg
Scope Petroleum products chroma meter was designed and manufactured according to the national petrochemical industry standard sh / t0168-92 standards "petroleum products chroma law". It can determine the colors of various lubricants and other petroleum products. The determination method is to inject the test sample into the color tube, and then compare with the standard color film to determine its color number. Features 1, the instrument uses molding technology, the whole structure is more reasonable and durable. 2, the system used by the us ybs optical refraction angle without manual adjustment, clear vision, no blind spots, the result is more accurate observation. 3, self zoom design, lighting control system makes the instrument more operational. 4, the instrument uses canosn color wheel, to ensure the accuracy of the results. 5, the instrument uses a belt drive structure, easy color number conversion operation, no noise. Environmental protection 6, reasonable structure design, can also see the two semi-color. 7. The color number corresponds to astm d1500, gb / t6540 and iso color number. Technical parameters 1) light source system: automatic control source size 2) colorimetric tube: standard requirements, special cuvette 3) color plate standard color plate: canosn color wheel 4) zoom system: independent zoom 5) transmission: belt drive 6) optical system: optical system us ybs
Scope This instrument conforms to gb/t 12005.1, gb/t 17931, gb/t 14190 requirements. High degree of automation, good repeatability of test results Features 1, using computer control, human-friendly interface that prompts operation 2, to achieve a fully automated test process, automatic extraction, automatic detection, automatic cleaning, automatic drying, without manual intervention 3, using 2 independent cleaning control system, but can also operate independently test 4, dual pipe detection, but also can detect asynchronous Technical parameters 1, temperature control accuracy: ± =0.1 ? 2, the measurement accuracy: ± 0.05 s 3, the maximum timing time: 999.9 seconds 4, the temperature control point: 0 ? -100 ? 5, maximum power: 2000w 6, power: ac220v ± 10v 50hz ± 5% 7. Overall size: 700 × 430 × 700mm 8, viscometer model: standard ubbelohde
Scope This instrument conforms to gb/t8019 iso6246 astm d381 standards. It is used to determine the actual resin content in aviation gasoline and gasoline. Features 1, the instrument adopts the metal bath heating system, the heating speed is quick, the bath body temperature is uniform. 2, the instrument configuration of the voltage regulator system, in the experimental process, the air intake is smooth, safe 3, the instrument is equipped with an independent air supply system, can independently regulate the flow of hot air of each test hole, the heat air flow control is accurate and reliable. 4, the instrument uses the imported (omron) temperature controller, liquid crystal display, high precision temperature control, low failure rate 5, the instrument used to protect the circuit, to avoid voltage or current increase on the instrument and operator damage Technical parameters 1 power supply: 220v ± 10%, 50hz, 2.5kw. 2, the heating method: heating the metal bath 3, test holes: 3. 5, the working temperature: 160 ~ 165 ?. 6, the temperature control method: automatic temperature control. 7, the temperature display: digital display. 8, flow display: meter display. 10, gas source: external air, > 1000 ± 150ml / sec.
Product: Fully Refined Paraffin Wax 58-60 Melting point: 58-60 deg.c Color: +27min Packing: 25kg cartons or 50kg bags
Description RD3190 has been developed to formulate high quality automotive engine oils and multigrade oils. The following performance levels can be achieved with oils formulated with RD3190. The Recommend Dosage Performance Level Dosage wt% SN/CF 12.6 SL/CF 12.3 Characteristics Item Typical Value Test Method Flash point (COC) 180min GB/T3536 Kinematic Viscosity (100),mm2/s Report GB/T265 TBN, mg KOH/g 80 SH/T0251 Calcium, m% 2.45 SH/T0270 Zinc, m% 0.86 SH/T0226 Phosphorus, m% 0.78 SH/T0296 Nitrogen, m% 0.78 SH/T0224 Sulfur, m% 2.54 SH/T0303 Molybdenum, m% 0.03 Spectrophotometry The product is packed in 200 liter metal drum (net weight:200 kg/drum).
FT wax 80#, 90#, 105#, 110#, 115# are common models used for hot melt adhesives. Fischer-Tropsch wax for hot melt adhesives offers superior thermal stability, consistent viscosity, and excellent adhesion properties. In comparison, microcrystalline wax provides flexibility and water resistance. FT wax excels in performance under high temperatures and ensures strong and durable bonds in various applications. Fischer-Tropsch wax, a synthetic wax derived from the Fischer-Tropsch process, has gained popularity in various industries, including the adhesive industry. Specifically, Fischer-Tropsch wax is commonly used in hot melt adhesives due to its unique properties and benefits. **1. Excellent Thermal Stability:** FT wax exhibits remarkable thermal stability, making it an ideal ingredient for hot melt adhesives. It can withstand high temperatures without losing its structural integrity, ensuring the adhesive maintains its performance even in demanding applications. **2. Consistent Viscosity:** The wax's consistent viscosity profile contributes to the stable flow properties of hot melt adhesives. This quality allows for precise application and bonding, leading to improved product quality and production efficiency. **3. Adhesion and Cohesion:** FT wax enhances the adhesion and cohesion properties of hot melt adhesives. It promotes strong bonding between substrates while also improving the adhesive's internal strength, resulting in durable and long-lasting bonds. **4. Low Odor and Color:** It is known for its low odor and color, which is advantageous in applications where aesthetics and sensory factors are important. It ensures that the adhesive does not impact the appearance or scent of the final product. **5. Compatibility:** FT wax exhibits good compatibility with a wide range of polymers and additives commonly used in hot melt adhesive formulations. This compatibility enhances the overall stability and performance of the adhesive. **6. Environmental Friendliness:** FT wax is considered environmentally friendly due to its biodegradability and non-toxic nature. Using this wax in hot melt adhesives aligns with sustainability goals and reduces the environmental impact of the adhesive products. **7. Improved Processability:** The properties of Fischer-Tropsch wax contribute to the improved processability of hot melt adhesives. It facilitates easier handling, application, and production of adhesives, leading to enhanced manufacturing efficiency. In conclusion, Fischer-Tropsch wax is a valuable component in hot melt adhesive formulations, offering a combination of thermal stability, consistency, adhesion properties, compatibility, and environmental advantages. Its use in hot melt adhesives contributes to the development of high-performance adhesives that meet the demanding requirements of various industries while also supporting sustainability initiatives.
WJWAX specializes in producing food grade paraffin wax, food grade microcrystalline wax, food grade white oil and other products. Our company has FDA certification, KOSHER, HALAL, ISO and other food grade certifications. Welcome to consult us. Food-grade paraffin wax is commonly used for waxing fruits and vegetables to extend their shelf life and retain moisture. Here's how it is utilized in this process: Protection: The wax forms a protective coating on the surface of fruits and vegetables, reducing moisture loss and preventing spoilage. Shine: It enhances the appearance of produce by giving it a shiny and appealing look, making it more attractive to consumers. Preservation: The wax helps to preserve the freshness of fruits and vegetables by creating a barrier against external factors that can lead to decay. Handling: It makes handling and transportation easier by providing a protective layer that reduces bruising and damage during transit. Safety: Food-grade paraffin wax is safe for consumption and does not pose a risk to human health when used appropriately on edible items. By waxing fruits and vegetables with food-grade paraffin wax, producers can improve the visual appeal, extend the shelf life, and enhance the overall quality of the produce for consumers.
Microcrystalline wax emulsions find diverse applications in industries such as coatings, textiles, and cosmetics. They serve as protective coatings for surfaces, additives to improve texture in textiles, and ingredients in skincare products. The emulsions offer water resistance, durability, and texture enhancement in various formulations. WJWAX can provide 100% pure microcrystalline wax. If you need wax for wax lotion, you can contact us at any time for samples. Micro wax is commonly used in the formulation of wax emulsions due to its unique properties that make it suitable for emulsification processes. Here are some reasons why microcrystalline wax is often chosen for wax emulsions: 1. **Emulsifying Agent:** Micro wax can act as an effective emulsifying agent, helping to stabilize the emulsion and prevent the separation of oil and water phases. Its structure and composition enable it to form stable emulsions with proper formulation. 2. **Texture and Consistency:** Wax contributes to the texture and consistency of wax emulsions. It helps provide a smooth and uniform texture to the emulsion, making it easier to apply and ensuring even coverage on surfaces. 3. **Thermal Stability:** Wax offers good thermal stability, which is important for wax emulsions that may be subjected to varying temperatures during storage and application. This stability helps maintain the integrity of the emulsion over time. 4. **Water Resistance:** Microcrystalline wax is known for its water-resistant properties, which can be beneficial in wax emulsions intended for applications where water repellency is desired, such as in coatings and polishes. 5. **Durability:** The durability of microcrystalline wax makes it a suitable choice for wax emulsions that need to provide long-lasting protection or effects on surfaces. It can enhance the durability and performance of the emulsion. Overall, microcrystalline wax is a versatile ingredient in wax emulsions, offering emulsifying properties, texture enhancement, thermal stability, water resistance, and durability. Its presence in wax emulsions helps ensure that the product is effective, stable, and provides the desired benefits when applied to various surfaces or materials.
WJWAX can produce and provide Vaseline specific microcrystalline wax with high cost-effectiveness, and can provide sample testing. We are a professional manufacturer of special wax, established in 2000, and can customize micro wax parameters according to customer requirements. Microcrystalline wax is a type of wax that is derived from petroleum. It is a white or yellowish, odorless, and tasteless wax that is made from a mixture of hydrocarbons. Micro wax is non-toxic and does not impart any flavor or aroma to Vaseline. It is also highly resistant to moisture and oxygen, which makes it an ideal material for Vaseline. This wax contributes significantly to Vaseline's formulation and benefits: Moisturization: Microcrystalline wax aids Vaseline in creating a protective seal on the skin, locking in moisture and preventing dehydration. This quality makes Vaseline an effective emollient, particularly for dry and damaged skin, promoting hydration and aiding in skin recovery. Texture Enhancement: It is pivotal in determining Vaseline's texture and consistency. It ensures Vaseline has a smooth, spreadable texture, facilitating easy application and ensuring uniform coverage on the skin. Barrier Function: The presence of micro wax enhances Vaseline's barrier properties, forming a protective shield that helps prevent water loss from the skin (TEWL). This barrier not only retains moisture but also shields the skin from external irritants, making Vaseline an excellent protective balm. Stability: It contributes to the stability and longevity of Vaseline. It aids in maintaining the product's homogeneity, texture, and effectiveness over time, ensuring that Vaseline remains reliable and safe for use throughout its shelf life. Skin Protection: By incorporating microcrystalline wax, Vaseline offers a layer of defense for the skin, safeguarding it against harsh environmental conditions like cold weather, wind, and dry air. This protective barrier helps to soothe and alleviate dry, irritated skin, establishing Vaseline as a versatile skincare remedy. In summary, Micro wax is a key component in Vaseline, providing its smooth texture and stability. It enhances the product's ability to lock in moisture, creating a protective barrier on the skin. This wax's fine crystal structure allows for better flexibility and adherence, making Vaseline effective for skin care.
