Features: Integrated with h.264, avs, mpeg-2/mpeg-4 decoding modules in both hd and sd, with self adaptive capability in accordance with input ts format. Support dvb-t and dtmb single-carrier and multi-carrier modes. Support power failure memory recovery, program management and epg. Optional support of value-added services such as data broadcasting, advertising, pvr, pushvod and many others. Support online upgrade and driver protection.
Features: Conventional appliance that can be applied to any standard ip data transmission network platform including ethernet-on-coax (eoc) network. Prospective device that supports full hd decoding, in order to preserve original audio/video quality. Highly compatible with other pms with standard data interface. Supporting of online upgrade ensures outstanding expandability for future scale expansion and new service implementation.
Laser tube type Sealed co2 laser tube Laser power 60w /40w Engraving area 600 x400mm Whole machine size 1, 330 x 810x 1075mm Engraving speed 0 - 72, 000mm/min Repositioning accuracy ¡à0.1mm Power supply Ac 110 - 220v0%, 50 - 60hz Gross power
This modle can be desiged according to customer needs . High configuration ballscrew model can be built up to350mm, the gantry tends to tremble beyong that height , while gearwheel models can be maximam 500mm to ensure overall stability. X.Y work area: 1200x1200mm. Z axis :350mm. Special made by order . Performance parameter,Mt-cr1208 Spindle roating speed,0-24000rpm Power,220v-50hz Max feeding,25m/min Work holding,By suction Spindle rate,2.2kw(water cooling) Drive moter,Stepper motor Interface,Usb Power(not include the spindle),3kw Resolution ratio,0.005mm Reposition precision,0.05mm Operation code,G code Dust collector,Yes
Specifications Maximum laser power: 12w Laser wavelength: 1064nm Beam quality m2: < 2.5 Q-switch frequency: 100khz Minimum q-switch laser pulse width: 25ns The largest q-switch peak laser power: 100kw Standard engraving range: 110x110mm / 200x200mm Minimum line width: 0.01mm Repeat accuracy: 0.001mm Total power: 2kw The demand for electricity: 220v 22v/50hz/10a.
Technical parameters: Maximum laser power: 10w Laser wavelength: 10.64¦ìm Laser repetition frequency: 50 khz Standard engraving range: 110mm110mm Engraving depth: 5mm Engraving line speed: 7000mm / s Minimum line width: 0.1mm Minimum characters: 0.4mm Repeat accuracy: 0.01mm Total power: 0.6kw The demand for electricity: 220v / single phase / 50hz / 3a.
Technical parameters: Maximum laser power: 30w Laser wavelength: 10.64ìm Laser repetition frequency: 50khz Standard engraving range: 110mm110mm Engraving depth: 5mm.
Specifications Laser-pumped mode: lamp-pumped Laser wavelength: 1064nm Laser frequency: 0-50khz Laser power: 50w Q-switch mode: acoustic-optic q-switch Pulse width: 20ns Beam quality: m2 < 10 Maximum carving speed points /s: 7000mm/s Standard engraving range (mm): 100 100 Laser head number: 1 Focal length: 100mm Focus diameter: 0.05mm Minimum marking characters: 0.3mm Cooling method: water-cooled Easy-wearing parts: kr lamp Easy-wearing parts usage time: 800 hours Applicable materials: metal and some non-metallic materials Input power: ac380v 10% 50-60hz Equipment power: 5kw The software: english and chinese marking software Engraving accuracy: 0.005mm Repeat accuracy: 0.005mm
Maximum laser power: 50w Laser wavelength: 1064nm Beam quality m2:
Specifications A8 super pulse 30W CO2 laser treatment apparatus is called "photon scalpel of cosmetology" The unit has the finer and the shar The Ultra pulse Fractional Laser System The A8Generation-2 Ultra Pulse Co2 Fractional Laser System, with 4 working modes as pulse, Scanning, Ultra Pulse and Continuous, could do various of high-demanded laser treatment safely and effectively, specially for aesthetic surgery and dermatology. It virtues for its 4 advantages, that is, high precision operation ,tiny thermal injury , short treatment time, quicker recovery time. With highest-integrated and ultra-high-speed Graphics Scanner, the machine could scan various of non-linear fashion with different size and shape. The scanning shape could be specially designed for customer¡¯s different needs, either 2 modes could be chosen in the 11 scanning modes. It also virtues as its Dynamic Balance and Compensation Install for Remedying Energy Attenuation. The machine could automatically compensate more energy when the energy of the laser tube reduces, without needing operators reset the treatment parameters according their own experiences. System Feature ¡¤Green guiding light make operation vision clearer¡¤For skin resurfacing and for dermatology cut/surgery.¡¤Various power supply for European, American and area needs.¡¤Smaller and lighter scanner(volume:7x4x11cm, weight:240g) for more convenient operation.¡¤With background set for operation time and machine use time.¡¤With time-accumulater for showing total operation time and machine use time.¡¤Friendly designed in modular for easy maintenance, with red and green light to guide it.¡¤Friendly designed for high safety, with warning-alarm-set. Clearly showed on the display screen.¡¤With energy self-replenishment system, improving the electric flue automatically to ensure real screen.¡¤With high cost-effective, great quality, best accessories, made by most skilled workers and engineers.¡¤With cooperation beauty hospital ,each machine should be first perfected in hospital, then customers.¡¤Committee of China Laser Standard Association, Executive of Laser Branch of china Optical Society. Application: It is applied in stripping ,cutting and vaporization. Specially, for skin rejuvenation, improvement of pachylosis, large pores, complexion unbalanced and so on. It has notable effect of removal scars, winkles, pigmentation, stain, acne, moles, nevus, hemangioma, skin tag and so on. Acne scars,Surgical scars,Traumatic scars,Actinic scarsMelasma (mask of pregnancy)Skin resurfacing (to improve texture)Wrinkles around the eyes and mouthPigmented lesions : age spots/brown spots/sun spots/Red vascular removal Fractional laser working principle With fractional CO2 laser resurfacing , the laser beam is broken up pr fractionated into many small micro beams which are separated ,so that when they strike the skin surface small areas of the skin between the beams, the skin would not be hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing time, with less risk of complications. While the small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant in facial skin rejuvenation. As these treated areas are much smaller than the surrounding healthy tissue, the healing time is significantly shortened. Most fractional CO2laser patients heal in less than one week for facial treatment. It provides results almost as good as traditional full-surface CO2laser, but with far less risk, downtime, infection and complication. Nicely, it can also safely treat other areas besides face, producing excellent results in treating neck, hands and back, such as skin laxity, acne scars and wrinkles. But only one to two treatment are needed for up to an 85% improvement. Traditional full-surface CO2laser treatments are performed by using a beam of intense laser energy, which is passed over the skin surface to vaporize the entire top layer of skin. The damage to the tissue is extensive, it takes at least tow weeks to heal and regrow a new top layer of skin(i.e., re-epithelialize the entire top layer of skin). Technical Specification Wave Length: 10.6umOutput Power: 1-30W adjustableMicro Pulse Energy: 5mj-100mj,16 steps adjustableEstimated Power: 125mj-1kjScanner Focus: 50mm (FFLS) or f=100mm (HFLS)Focus Spot Diameter: 0.1mm (FFLS) , 0.2mm(HFLS)Treatment Depth: 2000um (FFLS),600um(HFLS)Conducting Beam: Green Semi-conductor laser (532nm,=mW)Control System: microcomputer controlSmoke Emission System : Built-in air blowCooling System: Water coolingDisplay Screen: color LCD (8 inch touch screen)Light Delivery System:7 Joint articulated armWorking Mode: with scanner (galvanometer scanning)FFLS scanning area: max 15x15mmHFLS scanning area: max 15x15mmScanning mode: Ellipse, Rectangular (standard)Scanning velocity: 10m/sCW: output power,1-30w, 1W adjustableUltra: Frequency, 1000HZ, 1HZ adjustableTreatment control: footswitchEnvironmental Temperature: 5-40CRelative Humidity:80%Machine Weight: 40kgMachine Dimension: 450mm x 550mm x 1400mmPower Supply: AC 220/110V;50/60HZ. wooden
Therapy Principle Use the selective absorption characteristics and the high peak value bursting effects of the laser beam to reach the therapeutic purpose.This therapy instrument uses the most advanced Q-switch technology which makes the laser energy released at a very short time, then forms a high peak power giant pulse. The pigment granules will rapidly expansion and breakdown after absorbed such huge laser energy in short time, and the cell framework will be fully preserved and repaired quickly, This could treat the pigment tissue and almost has no destructive to the normal tissues Product Characteristics 1. With dual-wavelength, terminal output power is tested by the SFDA testing center, the test result is 1064nm, 1000mJ;532nm, 500mJ. New international 7 articulated light conducting arm, only available on this system within china territory. 2. International purchasing components (Q switch and Polarizer is supplied by the international famous company)with good performance, the laser cavity mode selecting technique which makes the output laser beam has good light spot mode, light spot light intensity uniformly distributed and no hot light spot. 3. High purity green light with good therapy results. 4. Equipped with 7-joints light conducting arm, with energy and density automatically adjust rod. Easy to operate. 5. Encapsulated mechanical parts, with moistureproof, dust proof and deformation proof functions. Thus make sure the laser¡¯s life span longer, with less maintenance cost and better performance 6.Intelligent Cooling System , Excellent water cooling with intelligent alert system, more safety and longtime reliable working 7.8.0" TFT color touch screen and arm with diode laser beam guide, easy for operation 8. CE approval Therapy Scope 1. The laser wavelength of 1064nm applied to black pigment and blue pigment lesions located on the dermis, such as black tattoo, blue tattoo and tattoo eye line, and so on. Long pulse in non Q switched mode-to improve chloasma, large pores visible, remove fine wrinkles, smooth white skin and enhance skin elasticity. 2. The laser length of 532 nm applied to the red, yellow and brown pigment lesions and other colors pigment lesions located on the skin surface and small area lesions therapy, such as pigmentation on the skin surface, freckles removal Therapy Characteristics Strong power output make big spot size treatment available, and with adjustable power supply, spot size adjustable too. Pulse width less than 8ns, peak value can reach to hundreds omen, it is very effective when using to remove some deep-skin tattoo and Ota's nevus. Q-switch:yag laser quick remove tattoo, Amazing treatment resultsQ7 adopts the active EO Q-switch module with unique resonator technology to get stable high energy laser output. The giant laser pulse has only 6-8ns pulse width which produced the mega-watts level high peak power! With our special housing and hardware platform, Q7would be used in different application environment .It s very useful for some high humidity. Q7 Q-switched mode could produce high peak power pulse laser with ¡°ns¡± level narrow pulse width. It's helpful for the pigment disintegration without any side-effect. All the action is in a single pulse rather than coming from multi-pulse which will lead to longer effect time on skin. Main Technical Parameter Laser type Nd: YAG laser (Electro-Optic Q-Switched output mode & long pulse 0.3ms output mode) Laser wavelength1064nm/532nm Optical beam transmission7 joint light conducting arm, transmission efficiency more than 75% Light spot diameter with spot size adjustable therapy handpiece, light spot size adjustable from 1~7mm; with parallel light handpiece, spot diameter is 10mm Laser aiming red semi-conductor aiming beam, wavelength 650~670nm Laser pulse width 6~8ns Single pulse energy 1000mJ(1064nm)/500mJ(532nm) Repeat frequency 1~10Hz/1Hz step Cooling systemclosed inside circulation water and constant temperature condition system Dimension 500 900 910 mm3 Weight 85Kg Power supply AC220/110V 10%,50/60Hz. wooden
Treatment theory hair removal E-light beauty machine= ipl + bipolar radio frequency + intelligent cooling system, when use together, you will see the amazing treatment result. Feature hair removal 1. Remove completely many kinds of spots, for example, freckle, chloasma, butterfly rash sunbum, age pigment, coffee speckle, cosmetic. 2. It is a effective hair removal tool, and it can clear away body & facial hair, clypeal hair, armpit hair, bikini hair, leg hair, arm hair and others body hair. 3 .It could dispel angiotelectasia, acne, scra of acne and erythema. 4. It could enhance breast, make women breast much more attractive. 5. It can remove wrinkle from our skin and meet much more glossy/soft , our skin hardly wrinkled. Applications hair removal 1. Hair removal: e-light will destroy the hair-follicle, and then achieve permanent hair removal effect. Whether black or golden hair and light-colored hair can be removed.2. Spot removal: e-light can reach the epidermis and dermis, borken down abnormal pigment cells. So that they will slowly eliminated from the body. 3. Red capillary and acne: e-light will closed abnormal blood vessels, clean the skin , kills the acne bacillus, make the skin more glossy, white.4. Skin rejuvenation: e-light stimulate collagen proliferation, make skin tighting and lifting, remove wrinkle and more white.5. Breast lifting: e-light wavelength can promote the breast regeneration. Make breast biger and biger. Wavelengh430/480/530/560/590/640/690/750nm Energy density0-50 j/cm2 Rf frequency0.1-10 mhz Rf power0-50w Light spot area10×20mm², 10×40mm².13×30mm², 15×35mm² Total enery supply1200w Cooling systemSemiconductor+ air-cooled + colse water circulation Operative screenTouch color lcd screen, Probe tempreture-4°c-0°c Dimension42*38*103cm Weight50kg Voltage220v110v/15a 50hz(60hz). Wooden
Laser diode Diode-pumped (dpss) laser diode, red 650nm, green 532nm Laser power300mw(r200mw + g100mw) Laser color Tri-color Control system160, High-capacity high-speed microcomputer built-in software Control modeSound control, auto mode, dmx512 Scanning systemScanning speed 20kpps, scan angle of , 20 degrees, closed-loop high-speed scanner, Demo effect,Plenty of beam effects, complex pattern may be accompanied by music, built-in space-time tunnel road, wave, geometric pattern, word, more than 100 kinds of effects. It can be transfer ilda signal & ic inner systems automatically, compatible all of laser software with standard ilda signal. It will be close if no signal, humanized design will be more safety for human. Application areas160,Bars, nightclubs, discos etc. Cooling methodAir-cooled Power consumptionAc110v-240v,50-60hz/300w. DimensionsL298mmxw208mmxh142mm N.W.
Laser diode,Diode-pumped (dpss) laser diode; red 650nm, green 532nm160; Laser power,300mw(r200mw + g100mw) Laser color ,Tri-color Control system160; ,High-capacity high-speed microcomputer built-in software Control mode,Sound control, auto mode, dmx512 Scanning system,Scanning speed 20kpps; scan angle of 161;192; 20 degrees; closed-loop high-speed scanner; Demo effect160;,Plenty of beam effects, complex pattern may be accompanied by music; built-in space-time tunnel road, wave, geometric pattern, word, more than 100 kinds of effects. It can be transfer ilda signal & ic inner systems automatically, compatible all of laser software with standard ilda signal. It will be close if no signal, humanized design will be more safety for human. Application areas160;,Bars, nightclubs, discos etc. Cooling method,Air-cooled Power consumption,Ac110v-240v;50-60hz/300w. Dimensions,L298mmxw208mmxh142mm N.W.,
Technical parameters (the working area and laser power can be customized according to requirement) Model of machine CX-CO2-30/60/80/100(optional) Laser tube Co2 laser tube Cutting area110mm 110mm /300mm 300mm(optional) Laser power 30w/60w/80w /100w(optional) Marking speed0-7000mm/s Operating voltage Ac220v 10%, 50hz Location precision 0.01mm Working environmentTemperature humidity 0-95% Min. Line width0.015mm Min. Character0.3mm Graphic format supportedBmp, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, COMPATIBLE HPG ORDER, SUPPORT DXF, PLT, BMP and dxt(tiandao embroider software), etc. Marking depth 0.01-0.2mm Working tableLift platform up to 1, 000mm from the bottom to the top Auxiliary devic eExhaust fan and cooling system Laser wavelength1064nm. Wooden case
Technical parameters (the working area and laser power can be customized according to requirement) Model of machine HLM-SD-50 Laser tubeSemi-conductor mould Cutting area110mm 110mm /300mm 300mm(optional) Laser power 50w Marking speed0-7000mm/s Operating voltage Ac220 10%, 50hz Location precision 0.003mm Working environmentTemperature: 0-40 centidegree, humidity: 45%-85% Marking depth 0-0.3mm Min. Line width 0.02mm Min. Character 0.2mm Graphic format supported BMP, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, compatible hpg order, support DXF, PLT, BMP and dxt(tiandao embroider software), etc. Working tableLift platform up to 1, 000mm from the bottom to the top Auxiliary deviceExhaust fan and cooling system Laser wavelength1064nm. Wood case
Technical parameters Model HL-W-200 Working table dimension200mm x 100mm(customized) Welding depth0. 1-2mm Max output power 200w Laser wavelength 1064nm Pulse width 0.3-20ms Welding frequency 1-100hz Pump sourceXenon lamp Single pulse engrgy 105j Consumed power 18kw Electrical source 220v 10%/50hz/40a Adjustable facula size0.2-2mm Waveform number 16 Power consumed 6kw Cooling mode Water-cooling Control of worktable Manual+CNC programming (optional) Consumable material Krypton lamp / filter / water / electricity Optional accessories Anti-laser glasses Usage environmentClean, no shaking, temperature 13 humidity 5% -75%. Wood case.
Characteristic of machine: 1. Quality accredited by CE, ISO9001 2. Double laser heads, cut bidirectionally from top and bottom at the same time, with high cutting efficiency, also assure the cutting seam to be straight 3. Automatic tracing system for focus point, overcomes the barrier of surface uneven 4. Powerful software, like autocad, coreldraw, and adobe photoshop for unique designing. 5. Adopting imported guide rails, ballscrew transmission system, servo motor and our special designed software, insure steady performance 6. Cnc operation, with high cutting speed and accuracy 7. Exhaust system to keep the working condition free of smoke pollution 8. Can cut max. 25mm thickness plywood 9. With our multi-function bending machine, can realize the full automatic process of template making. Technical parameters: Model of machine Hld1208 Hld 1210 Hld 1212 Hld 1215 Hld 1218 Hld 1220 Valid size (mm) 1200*8001200*10001200*12001200*15001200*18001200*2000 Laser tube type Co2 sealed laser tube Laser power 300w (work bidirectionally with two laser heads) Cutting speed 0-200mm/s Power supply 220v 10a Cutting width0.3-3mm(optional) Max. Thickness25mm Color separationYes Cutting precision 0.02mm Image form PLT, EPS, BMP, DXF Control system:Movement control board/CNC Transmission Ballscrew Driving systemServo motor Air feed meansAir. Wood case.
Technical specifications:. Model HL-YLC500-2010 Cutting zone2000*1000mm Cutting thickness0.2-6mm Laser routeFixed laser route, work piece moving by cross slide working table Transmission methodServo ballscrew Cutting positioningRed light pointer Operating systemWindows 2000/xp Max output power500w Laser wavelength1064nm Pulse frequency1-300hz Min.Linewidth0.15mm Electrical source380v/50hz/100a X/y/z axis geometric positioning accuracy 0.08mm/1000mm X/y/z axis re-orientation accuracy 0.04mm Control systemOffline motion control Cooling system5p water cooling Max cutting speed35mm/s Weight1500kg. Wood case.
All kindly of calculators.