Introduction:
Leizhan specialize in kraft paper line, corrugated paper line&fluting paper line, test liner paper line, duplex paper line. We also supply many kinds of auxiliary machine and parts such as cylinder, press roll, dryer, pope reel, felt roll, felt, polyester wire, head box, rewinder, calender machine and so on.
Qcs
Paper winder
Finished product package delivery system
Paper cutter
Lubricating system & hydraulic system & air compressor system
Steam and condensate system
Cooling tower
Made in china high quality pulp slurry pump factory
What we can provide
Waste paper pulp machine production line
Automatic corrugated box production line
Corrugated paper making production line
Fluting paper pulp making production line
Coated white board paper production line
Honeycomb paper making production line
Testliner paper making production line
Paper plate making production line
Tissue paper making production line
Toilet paper making machine line
Kraft paper making machine line
Boxboard paper machine line
Paper coating machine line
Napkin paper machine line
Occ line
1.Jumbo roll stands: 2 , with pneumatic type wide belt to convey paper, each jumbo roll has independent tension adjustor and left-right adjusting device.
2.Pneumatic lifting jumbo roll to reduce the labor strength.
6.Roots vacuum bump absorbing system with strong suction, negative pressure is stable.
matic paper cone production line doesn't need any manipulation after putting raw material paper into it .The production progress is operated by plc system, the principle machine transmission use cam to distribute time structure. Mechatronics is made up by different service position working principle, double -speed variable frequency control and photo-electric detection approach control, pneumatic time delay control. It makes the labor-saving, energy-saving, high-efficiency, high-quality paper cone production come true.
Adopt sus304 as the shell to protect the ceramic cone can be used for long time, and inner lining with ceramic to make the cone have good performance of wear resistant, good cleaning result.
Low cone 995cm long
763 Paper Machinery Suppliers
Short on time? Let Paper Machinery sellers contact you.
Machine data:
Single phase 220v£¬50hz
Size: single shaft 600*400*450mm
Two shaft 600*400*450mm
Four shaft 1200*1050*530mm
Weight: 45-140kgs
Technical data
1. Suit for mini jumbo width max. In 250mm/330mm/450mm
Roll diameter max. In 140mm-300mm
2. Single rewinding shaft, two rewinding shaft and 4 rewinding shaft system suit for different demand
3. Rewinding width max. In 250mm/330mm/450mm.
Max. Rewinding roll diameter in 100mm-120mm.
Usage
1. Specially designed as the desk top mini slitter for ttr films like fax ribbon, barcode ribbon, coding foil and hot stamping foil.
2. It is for ink side in/out, 1 inch and 1/2 inch core change, long length to short length rewinding and slitting work
3. The max. Unwinding roll diameter is in 300mm
Specialized in the slitting of thermal transfer ribbons such as fax film, barcode ribbon, coding foil and hsp
Machine data
Packing size: 880*260*300mm (l*w*h)
Weight: 20kgs
Air power by 6-8kgs
Technical data
1.,Dry and clean air power by 6-8kg
2.,It is for 1 and 1/2¡± inch paper core and half inch paper core notch cutting used. If other size of paper core requires, new cutting mould requires.
3.,The size of the finished notches is in 4mm in width and 7mm in height.
4.,The pneumatic component is made by airtac which is with high quality assurance.
5.,Protection cover helps to avoid the accidental hurts for the operator.
Machine performance:
Can be used as an aide to support the jogger or cutter, or as an unloader after the cutting action;
Two operation modes (Manual and Automatic ) control pallet lift and down;
Max. height of lift platform: 900mm (Paper stack can actually be higher, but the platform won't move until the photo eye is activated)
Patent of utility model: ZL200920295164.6, owned intellectual property right.
Technical Parameter:
Model:SJ1000 Lft
Max.length of pallet-Length:135.5 cm
Max.width of pallet-Width:99.7cm
Max.height of pallet:90cm
Max.loading capacity:1000kg
Max.power:0.75kw
Machine Size:167*151.2*149 cm.
Machine performance:
Knife-seat guiding structure with sliding block type, cam type for adjusting-knife mechanism.
Clamp press paper stack through hydraulic system, the spring re-position.
Worm gear drive mechanism, hydraulic clutch, mechanical brake.
WESSEL hydraulic system from Germany (optional), Italy oil pump.
Switzerland ABB main motor(optional).
One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain.
Import ball screw with double linear guides to drive backgauge.
Whole sealing safety guard for rear work table (optional).
Germany LEUZE infrared protection device(optional).
Main electronic units are from French TE and Japanese ORMON famous international brands.
Machine performance:
* Digital display system of paper cutter adopts microcomputer technology;
* The paper cutting machine adopts LCD to display cutting data;
* Show the dimensions of the front blade and the back blade;
* The data resolution of paper cutter reaches 0.05mm.
Machine performance:
* Use of a jogger with air can increase productivity by up to 35%;
* Jogging rate can be adjusted;
* Air removal roller can be set for 0, 1 or 2 pressings;
* Adjustable side flaps, convenient for paper stack transportation;
* Air on main table and side flaps;
* Jogger can be inclined right or left in any of 4 positions;
* Either a separate compressor or house, air is needed for the pressing roller.
Machine Performance:
Knife-seat guiding structure with sliding block type, cam type for adjusting-knife mechanism.
Clamp press paper stack through hydraulic system, the spring re-position.
Worm gear drive mechanism, hydraulic clutch, mechanical brake.
WESSEL hydraulic system from Germany (optional), Italy oil pump.
Switzerland ABB main motor(optional).
One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain.
Import ball screw with double linear guides to drive backgauge.
Whole sealing safety guard for rear work table (optional).
Germany LEUZE infrared protection device(optional).
Main electronic units are from French TE and Japanese ORMON famous international brands.
Technical Parameter:
Model:SQZK168GM20
Max.Cutting Width:168cm
Max.Cutting Length:168cm
Max.Cutting Height:165mm
Min.Cutting Size(without false clamp plate):30mm
Min.Cutting Size(with false clamp plate):90mm
Front Table Length:75cm
Max.Clamp Pressure:50000N
Max.Cutting Speed:42time/min
Main Motor:8.5KW
Net Weight:6200Kg
Machine performance:
* Clamp press paper stack through hydraulic system, the spring re-position;
* Worm gear drive mechanism, hydraulic clutch, mechanical brake;
* Hydraulic system adopts Germany advanced technology, the hydraulic units are ISO approved;
* One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain;
* Import ball screw with double linear guides to drive backgauge;
* High safety infrared protection device according to CE standard;
* Main electronic units are from French TE and Japanese ORMON famous international brands;
* Whole sealing safety guard for rear work table (optional).
Machine performance:
* Hydraulic knife and clamp activation;
* Import hydraulic control solenoid;
* Linear guide, ball leading screw, chromed work table;
* Patent of invention: ZL200810062224.X,owned intellectual property right;
* Belong to provincial scientific research achievement project;
* Energy-saving power is only consumed when cutting and clamping;
* Perfect for small to medium printing operation.
Semi-automatic double wire binding machine can be feed by spool or through forming machine. The machine counts, cuts and places the wire in position to be closed. The operator places the perforated book on the table where the machine takes the book and places it in the wire before closing the wire. The machine can produce between 600-900 books per hour, depending on operator. This machine is ideal for the production of notebook, calendars, agendas, albums, etc.
Technical data :
Binding wide : 80-520 mm
Binding speed: up to 1000 volume/hour (based on your proficiency level)
Wire diameter: 1/4 -3/4
Power: 1(ph)220v 50/60hz (other voltage on request)
Weight: 300kg
Machine dimensions: 780x730x1150mm
Package way: wood case package
The semi-automatic double wire inserting and closing machine. The machine takes the double wire from either a spool or the forming machine and counts it. Once the appropriate number of loops are counted it cuts the wire into a strip and transports it onto the book insertion section. The operator takes the pre-perforated sheets and places the sheets onto the wire. Because that the binding lays on a rail it is very easy for the operator to fix the pre-perforated sheets in the double wire. The sheets with the inserted double wire are then pushes onto a pushing device that transport the group into the closing section. The finished product is delivered onto a delivery conveyor.
Technical Data :
Binding wide : 80-360 mm
Binding Speed: Up to 1000 volume/hour (based on your proficiency level)
Wire diameter: 1/4 -1 1/4
Power: 1(PH)220V 50/60Hz (other voltage on request)
Weight: 300KG
Machine Dimensions: 2020x950x1250mm
Package:wood case package
The machine is suitable for punching holes in all kinds of books, calendars paper, tutorial paper, pp in batch. This machine with functions of automatic separating, punching and receiving paper together. It provides your a high cost performance by concise and rational design.
1. Simple and convenient to adjust the size and moudle .
2. Flexible seperating paper mechanism and no need to turn over the papers to guarantee high compatibility and low failure rate.
3. Easy operation system to be controlled without professional experience.
4. High quality for punching without deckle edge and accurate punching position.
5. Optional punching moulds.
Max. Sheet:320320mm
Min. Sheet:13095mm
Punching speed:4200-5400 times/hour
Power:1ph 220v 50/60hz(other voltage is available)
Size: 18009001300mm
Weight: n.W.:635 kg g.W.:750kg
Package: wood case package
For the mass production of double loop wire that can be used for binding notebooks, calendars, agendas, albums, etc. The machine converts straight spooled wire, either nylon coated, tinned or galvanized to formed double loop wire that can be then spooled, cut and placed in boxes or attached directly to the binding machine. Can produce between 400-600 loops per minute.
Technical data:
Speed: 350-500 loops/min
Power: forming machine: 0.75kw
Coiling machine: 0.37kw
Paper cutting machine: 0.25kw
Power: 3ph 380v 50hz(other voltage on request)
Forming machine: 2400x650x1700mm
Coiling machine: 1300x1000x1200mm
Paper cutting machine: 600x500x1400mm
763 Paper Machinery Suppliers
Short on time? Let Paper Machinery sellers contact you.
