Machine data
Packing size: 880*260*300mm (l*w*h)
Weight: 20kgs
Air power by 6-8kgs
Technical data
1.,Dry and clean air power by 6-8kg
2.,It is for 1 and 1/2¡± inch paper core and half inch paper core notch cutting used. If other size of paper core requires, new cutting mould requires.
3.,The size of the finished notches is in 4mm in width and 7mm in height.
4.,The pneumatic component is made by airtac which is with high quality assurance.
5.,Protection cover helps to avoid the accidental hurts for the operator.
Machine data: Single phase 220v£¬50hz Size: single shaft 600*400*450mm Two shaft 600*400*450mm Four shaft 1200*1050*530mm Weight: 45-140kgs Technical data 1. Suit for mini jumbo width max. In 250mm/330mm/450mm Roll diameter max. In 140mm-300mm 2. Single rewinding shaft, two rewinding shaft and 4 rewinding shaft system suit for different demand 3. Rewinding width max. In 250mm/330mm/450mm. Max. Rewinding roll diameter in 100mm-120mm. Usage 1. Specially designed as the desk top mini slitter for ttr films like fax ribbon, barcode ribbon, coding foil and hot stamping foil. 2. It is for ink side in/out, 1 inch and 1/2 inch core change, long length to short length rewinding and slitting work 3. The max. Unwinding roll diameter is in 300mm Specialized in the slitting of thermal transfer ribbons such as fax film, barcode ribbon, coding foil and hsp
Machine data£º Machine size: 2500*2500*1800mm£¨l*w*h£© Weight: 1500-2000kgs Power by: three phase 415v£¬50hz£¬4kw or single phase 220v£¬50hz£¬4kw Air pressure supply: 0.6-0.8mpa Technical data 1.,For jumbo roll width in max: 1010/1050mm 2.,For jumbo roll paper core:6 inch 3.,Jumbo roll dia.: 600/630mm in max 4.,Suit for film thickness in 4-20um (fax ribbon, barcode ribbon, coding foil, hot stamping foil ect.) 5.,Mechanical speed: 30-250m/min 6.,Working speed: 30/200m/min 7.,Jumbo roll installation: clamping without axle inside 8.,Jumbo roll position adjustable 9.,Finished roll spec: maximum rolling diameter:120mm Finished rolls core in 1¡± or 1/2 Specialized in the slitting of thermal transfer ribbons such as fax film, barcode ribbon, coding foil and hsp.
1.Power single phase 220 v, 50hz, 800w. 2.Function of machine: Specialized in rewinding the ink side in /out , wider ribbon roller to narrower ribbon rolls It is with edge cutting function, when rerolling the defective ribbon rolls, the edge of the ribbon can be cut off to make both ends of the ribbon rolls much tidy. And this can be also used for cut the ribbon from wide one to several narrower ones. 3.Unwinding width within 240mm, length within 1000m( dia.100mm) or it can be specially designed . 4.4rewinding width from 20-240mm.
Supplier: Paper core puncher , auto ttr slitter, mini ttr slitter, rewinding machine
Machinery to make cores for transformer 1. Wound Core Cutting Machine 2. Swivel Shear (Core Cut-to-Length Machine) 3. Fix Shear (Core Cut-to-Length Machine) 4. Notching and Hole Punching Machine 5. Coil Winding Machine 6. Foil/Strip Transformer Winding Machine Export Wooden Packing
Paper Cutting Width: 1500-3000 mm Minimum Paper Cutting Width: 40 mm Number of Paper Cutting Blades: 15 pieces Maximum Cutting Speed: 400 m/min
Number of Layers: 5 to 30 Layer Cutting System: Multi Knife or Opposing Knife (with Sew Eurodrive servo motor) Minimum Cutting Length: 50 mm Maximum Cutting Length: 6000 mm Minimum Diameter: 10 mm Maximum Diameter: 600 mm Maximum Wall Thickness: 15 mm
This machine produces 2 edge protector of the same size, one above the other, at the same time. 1-Adjustable paper guiding and Kraft folding section 2-7,5 Kw 102 rpm Motor (Bangle Bottom Pressing Rollers) 3-7,5 Kw 152 rpm Motor (Bangle Upper Pressing Rollers) 4-Pneumatic Angle Pressing System 5-Electronic Speed Controller (Towing Groups) 6-Top Moving Press Rollers 3 Groups Diameter 135mm 7-Lower Moving Press Rollers 3 Groups Diameter 285mm 8-Paper Angle Making Feature Min 30x30 Max 120x120 9-Eccentric Servo Cutter Section (Servo motor brand SEW EURODRIVE) 10-Guillotine Blade System 11-Min : 50 mm Max : 6000 mm Cutting Length 12-Operator Control Panel (7'' Beijer brand) 13-The maximum speed of the machine is 80 mt/min (can be optionally increased to 100 mt/min) 14-Maximum blade cutting thickness is 8 mm.
Supplier: Paper tube machines, paper tube cutting machines, paper edge protector making machine, paper edgeboard machine, paper corner machine, slitting and rewinding machine, paper coil slitter and rewinder machine, paper core machine, cardboard angle machine, edge protector notching machine, folding dispenser towel machine paper tube and core making machinery, paper tube making machine, paper tube winder (ccw model) o paper core winder o convolute paper tube winder pulp moulding machinery o reciprocating pulp moulding machine o pulp moulding machinery o multi side rotary pulp moulding machine o dry moulding machine fibre drum making machinery