Product description
Type: Acrylic emulsion elastomer wall covering facade paint, matt.
Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface.
The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments.
Protects the surface against formation of mould.
The opacity of tinted colours is indicated on the tinting label.
Product application
Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc.
Product description
Type: Acrylic emulsion primer.
Flugger Sealer is formulated with an acrylic micro-dispersed binder with
unique penetration properties.
Is alkaline resistant and provides an efficient sealing on slightly chalking
and absorbent surface.
Product application
Suitable for interior priming of building materials, e.g. gypsum board, light concrete, limestone, brick, plaster, cement fibre plates, concrete as well as fillers.
Technical data
Density: 1,01 kg/litre
Solids: Weight%: 14 Vol.%: 13
Spreading rate: 3-7 m2per litre depending on the substrate
Application temp.: Min. working temperature during application
and drying/curing: + 10¡æ
Max atmospheric humidity 80 % RH
Drying time at 20¡æ, 60% RH: Dry to touch: 1 h
Recoat interval: 6 h
Fully cured: Several days
Dilution: Water
Cleaning of tools etc.: Water
Storage: Cool, frost-free and tightly closed.
Product properties
Flugger 377 Adhesive roll-on is a PVA-reinforced adhesive, which is transparent when dry.
Application
For interior hanging of light glass tissues and glass felt. Also suitable for the hanging of light, paper-backed textile wall coverings and for non-woven wall coverings. Also suitable for the hanging of Flugger Structure.
Only for use in dry rooms.
Technical data
Type: Adhesive for tissue wall coverings
Density: 1.02 kg/litre
Solids: Weight%: 19 Vol.%: 16
Spreading rate: 4-5 m?per litre
Application temp.: Min. +150C
Cleaning of tools: Immediately with hot water and soap
Storage: Cool, frost-free and tightly closed.
WX618 Water Base transformation anti-rust priming paintis an advanced product at the international technique level, and it is applicable to the corrosion resistance treatment of the rusted steel parts. It is widely used to the manufacture and maintenance of the equipment in use such as steel structure, tunnel and bridge, establishment of city construction, high-speed road, railway,ship,shipside, petroleum, metallurgy, chemical engineering and so on. It can serve as priming paint treatment with anti-rusting and rust-inhibitoring before painting. It can be used as the paint with anti-rusting and rust inhibitoring alone,too. It possesses excellent corrosion resistence effect and can be combined with kinds of surface and middle paints on the market. Product mechanism: all are anti-rust primer on the market now is to only cover the rust physically. That is to remove the rust by the sand blasting, then coat the surface with anti-rust primer with old technology. This traditional craft can cause the problems posed are:
Its only the effect of physically cover on the rust and it can never reach the role as descripted on the specification
But WX618 water-based rust transformation primer has chemical reaction with the rust. After 20 minutes of the process, the rust turns into black primer. That is rust is part of the raw materials during this chemical reaction. This primer and the hydrogen bonding interaction between the iron material is the largest. The effect can never be reached by the physically covery as other old primer.
Product Advantage of WX-618:
1. The product has sound antirust effect. After coated once or twice, and combined with appropriate surface paints, the surface will not rust against for 10 years longer under nature condition.
2. The material can be operated with rust, replacing conventional processes of manual sandblstering, anti-rusting and rust-inhibitor priming paint. It can save the cost for rust removing and improving the operating efficiency remarkably
3. This product is water base and without harmful substances such as benzene, formaldehyde. The VOC of this product is quite low. It will not bring out powder, dust and smell. This product is good for environmental protection.
4. Operation is convenient; roller, brushing and coating all are applicable
5. It is applied to the complicated corrosion resistance treatment of rusted steel parts, avoiding the remnants of acid liquid in the conventional acid washing method
6. It has the fire resistance
Use Method:
Paint the rusted iron with WX-618 with brush or spray. After 20 min, the rust turns to black primer. The whole process is just so easy
1kg,5kg,10kg,20kg
1409 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
Adopt special acrylic resins as the main raw material and have excellent adhesion and good whether resistance. Scientific mixture ratio makes the paint with high solid content which ensures the paint can be stock for a long time without deposition. The marking coat is thick and can be sprayed with reflective materials for a long-term reflective ability. The coating dries fast and the drying time are about 7 to 10 minutes under normal temperature.
Property: low adhesive, high softening point, good dispersive capacities and widely used in plastic industry.
Application:
1. Used widely in the course of extruding, calendaring, injecting, blowing molding of pe, pp, and pvc and acts as the slip agent and lubricant.
2. As a lubricant of insulating materials in cable, it can largely improve the productí»s surface quality.
3. Good characteristics of light and chemical resistance performance applied as flatting agent in processing of powder paint and printing ink.
4. As lubricating and softening agent for natural or compound fiber.
5. Dissolving easily with polythylene, pvc, polypropylene and so on, as a lubricant it can largely improve the processing efficiency and overcome the felting between the products.
6. Applied in processing of shoe polish, candle, leather and sticking agent etc.
Index:
Appearance white granule or powder
Dosage (%) 0.5-5
Softening point (íµ) 100-110
Density (g/cm3) 0.90-0.92
Viscosity(cps)150íµ 50-100
Hardness(dmm) 3~7
Molecular weight 1500-2500
Packed in 25kg knitted bag with inner bag and no danger.
Strong dirt resistance;
Easy application
Rapid drying speed,
12000 times for scrub resistance.
Method
* surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
* mix well before painting, plus proper clean water for diluting and mix well.
* stop application when temperature is below 8 celsius
* proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry).
* application tools: brush, roller, and spray
*consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment)
Attention
Shelf life: 24 months in sealed cans.
Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius,
Thinned paint should not be poured back to the original can.
Technical index
This product conforms to china national mandatory standard:gb/t9756-2001
*appearance: white viscous liquid
*solvent type: water-base
*color: white
* gloss: matt
*to touch: 0.5-1 hours
*viscosity: 100 ku
*solid content:53%
*voc: ín47 g/l
Waterborne assist non-odour.
Super dirt resistance,
Water resistance and breathe freely,
Non-yellowing,
Outstanding hiding and adhesion,
50000 times for scrub resistance.
Method
Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
Mix well before painting, plus proper clean water for diluting and mix well.
Stop application when temperature is below 8 celsius
Proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry).
Application tools: brush, roller, and spray
Consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment)
Attention
Shelf life: 24 months in sealed cans.
Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius,
Thinned paint should not be poured back to the original can.
Technical index:
This product conforms to china national mandatory standard:gb/t9756-2001
Appearance: white viscous liquid
Solvent type: water-base
Color: white
Gloss: matt
To touch: 0.5-1 hours
Viscosity:100 ku
Solid content:57%
Voc: ín 47 g/l
Full matt paint film,
Excellent mildew resistance, algae resistance and health.
Strong adherence performance
Water resistance and breathe freely,
Lasting light color, strong tarnish resistance,
Outstanding hiding and coverage, smooth feeling,
Easy application and rapid drying speed,
80000 times for scrub resistance.
Method
* surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
* mix well before painting, plus proper clean water for diluting and mix well.
* stop application when temperature is below 8 celsius
* proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry).
* application tools: brush, roller, and spray
*consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment)
Attention
Shelf life: 24 months in sealed cans.
Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius,
Thinned paint should not be poured back to the original can.
Technical index:
This product conforms to china national mandatory standard:gb/t9756-2001
*appearance: white viscous liquid
*solvent type: water-base
*color: white
* gloss: matt
*to touch: 0.5-1 hours
*viscosity:100 ku
*solid content:59%
*voc: ín47 g/l
Series exterior Lifespan Feature
Exterior paint series 1 2 years 1.Paint film smooth and solid
2.Good weather resistance
3.Water-resistent, alkali-resistent, scrub-resistenrt
4.Good coverage ability and economically
Exterior paint series 3 3 years 1. Firm tensile tenacious, glossy
2. Anti-sunshine and anti watering
3. Strong adhesion
4. Strong coverage ability, anti-site,
Exterior paint series 6 5 years 1. High glossy
2. Outstanding dirt resistance, alkali resistance,
3. Outstanding water resistance, alkali resistance,
4. Outstanding coverage ability and leveling property and easy application
Exterior paint series 9 More than 8 years 1. Excellent light glossy
2. Excellent anti-dirt resistance
3. Strong weather resistance
4. Strong coverage ability and good levelling property
1. According to the customers requirement, we can provide the product with content of tetrahydro resin acid between 30-60%; and we can also provide special products with low softening point.
2.Uses: used in adhesives, coatings, inks, solder material and solder flux, cosmetics, food industry, etc.
Description
1.Air-cleaning;2. Self-cleaning;3. Anti-bacteria;4. Water-cleaning: purify the water pollution and the organic injurant in the water; 5.Increasing the concentration of minus oxygen hydronium: nanometered titanium dioxide can produce the minus oxygen hydronium under the sunshine as if the effect is produced by thunder strom to make the air much fresher.
Application
Use for textiles, wood board and other hydrophilic material, or use for surface treatment of base material can soakage with water; also can be added into painting and coating.
Packing
Plastic barrel in 5kg/20kg. Or upto customer's requirement.
Plastic barrel in 5kg/20kg. Or upto customer's requirement.
Specifications and Properties:
Colors Available: Black, gray, metallic color and silver dots, etc;
Solid Content %: 28-30)f+ 0.2
Cure Temperature Range (380-400)
Cure time: 10minutes
Theoretical Coverage: 6.5f+ 0.2m2/KG 12»~15»
Certificates: FDA / LMBG / RoHS / SGS
Coating flux uses a combination of PTFE resin and super-heat-resistant resin. With excellent adhesion strength, good hiding power, age resistance and weather resistance when used on the surface of aluminum, stainless steel, and ordinary steel.
Model NO.: 9906
Unit Price/Payment: T/T, L/C.
Sea-ion 316 is specially designed for recycling disk. It can remove the uv glue, metal reflecting layer, dyestuff and printing ink quickly and thoroughly. The product is non-toxic and inodorous. Its quality is stable. Cooperate with the sea-ion process technology; it is a necessary product for waste disk recovery processing enterprises. No damage to substrate material, high recovery rate, after cleaning, the pc is transparent & bright, high added value. No need to use concentrated sulfuric acid, complete process need only one step, simple and safe. Cleaning time is short, save energy, increase production efficiency.
Our products:
1. Sea-ion 301-woven bag printing ink normal temperature detergent
2. Sea-ion 302 po/ps acidophilus milk bottle printing ink normal temperature detergent
3. Pe/pp bottle printing ink detergent
4. Sea-ion 311 bottle flake degumming agent
5. Sea-ion 312 pc car lampshade film and paint detergent
6. Sea-ion 313-pc mobile phone frame depainting agent
7. Sea-ion 315 pc nursing bottle ink detergent
8. Sea-ion 316 pc disk paint and film detergent
9. Sea-ion 317 pc eyeglass color and film detergent
10. Sea-ion 318 pc glass frame depainting agent
25kg/barrel
1409 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
