WX618 Water Base transformation anti-rust priming paintis an advanced product at the international technique level, and it is applicable to the corrosion resistance treatment of the rusted steel parts. It is widely used to the manufacture and maintenance of the equipment in use such as steel structure, tunnel and bridge, establishment of city construction, high-speed road, railway,ship,shipside, petroleum, metallurgy, chemical engineering and so on. It can serve as priming paint treatment with anti-rusting and rust-inhibitoring before painting. It can be used as the paint with anti-rusting and rust inhibitoring alone,too. It possesses excellent corrosion resistence effect and can be combined with kinds of surface and middle paints on the market. Product mechanism: all are anti-rust primer on the market now is to only cover the rust physically. That is to remove the rust by the sand blasting, then coat the surface with anti-rust primer with old technology. This traditional craft can cause the problems posed are:
Its only the effect of physically cover on the rust and it can never reach the role as descripted on the specification
But WX618 water-based rust transformation primer has chemical reaction with the rust. After 20 minutes of the process, the rust turns into black primer. That is rust is part of the raw materials during this chemical reaction. This primer and the hydrogen bonding interaction between the iron material is the largest. The effect can never be reached by the physically covery as other old primer.
Product Advantage of WX-618:
1. The product has sound antirust effect. After coated once or twice, and combined with appropriate surface paints, the surface will not rust against for 10 years longer under nature condition.
2. The material can be operated with rust, replacing conventional processes of manual sandblstering, anti-rusting and rust-inhibitor priming paint. It can save the cost for rust removing and improving the operating efficiency remarkably
3. This product is water base and without harmful substances such as benzene, formaldehyde. The VOC of this product is quite low. It will not bring out powder, dust and smell. This product is good for environmental protection.
4. Operation is convenient; roller, brushing and coating all are applicable
5. It is applied to the complicated corrosion resistance treatment of rusted steel parts, avoiding the remnants of acid liquid in the conventional acid washing method
6. It has the fire resistance
Use Method:
Paint the rusted iron with WX-618 with brush or spray. After 20 min, the rust turns to black primer. The whole process is just so easy
1kg,5kg,10kg,20kg
Supplier: Disinfection, household cleaning products
industrial cleaning, phosphating and rust removers , horse care products, car cleaning products , uv varnish , insulating primers , paint strippers
rust inhibitors
Services: Oem service
Buyer: Methylal, dimethylcarbonate, dioxolan
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
*The engine adopts famous brand engine, 100% inspection before delivery. *The Snow Cleaning Machine adopts full metal jacket design,after oxidation spray,anti-corrosion rust proof,long service life. *Double LED lamp of operation panel, greatly improving the workers efficiency and safety at night and early morning. *The Snow Cleaning Machine uses monolithic auger design, low cost of vulnerability consumption and easy replacement. *The Snow Cleaning Machine has the advantages of fashion appearance,mult functions, light and flexibility,simple operation.
Supplier: Anti rust, anti corrosion products for reinforcement bars, deformed bars, anti rust primers, waterproofing compounds and allied products, construction chemicals
Services: Export
Buyer:
Winoil solvent-based insulating primer for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Size 1 kg 5kg 10kg 20kg Winoil insulating primer based on solvents for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Can be used as a primer outdoors. Wood can be insulated against the penetration of the wood's ingredients. Winoil insulating primer can be painted over with any conventional solvent-based or emulsion paint. Can be painted over after approx. 20 minutes. Color: White Weight n/a Size 1kg, 5kg, 10kg, 20kg
Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors. Size 750ml 5 litres 25 litres Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials. Weight n/a Size 750ml, 5l, 25l
RUBEX-OEL wood coating is an environmentally friendly Carbolineum replacement product in rosewood tone, low odor and quick drying for outdoor use. Size 5 litres 10 litres 25 litres RUBEX-OEL wood coating is an environmentally friendly carbolineum substitute product in rosewood tone, low odor and quick drying for outdoor use. Penetrates deep into the wood and provides a water-repellent effect, effectively protects old and new wood against weathering, rot and fungal attack. Color: brown. Not suitable for benches, tables, chairs, etc. Weight n/a Size 5L, 10L, 25L