Find Verified Other Ores Minerals Suppliers, Manufacturers and Wholesalers

Product introduction:
chalcocite is lightgray powder,it is made by selected and crushed chalcocite ore, the main ingredients is cuprous sulfide.
The density is 8.3-8.9g/cm3, the hardness is 3 ,the melting point is 1030 centigrade and the boiling point is 2310 centigrade.
Chalcocite used for friction materials to adjust the high temperature friction properties and wear resistance, it suitable for disc brake pads and drum brake pads. According to the requirements of the performance,the recommended regular consumption is between 2% and 8%.

Property:
density: 5.4-5.8g/cm3
copper content:18%-20%
moisture:2%max
screen analysis: +S 100 0
-S 180 90%max
grade:200mesh,325mesh
sieving rate: 97%

Product description, Product introduction:
Diatomite is a kind of biogenic silicastone, It is mainly composed of the remains of ancient diatom. Diatomite mineral contains opal, and mixed with the monomer of quartz grain impurities, the color can be white, yellow ,
green etc.. Diatomite is a kind of friction materials,it can improve the process performance of friction material, and can make the products have stable friction performance, prolong the service life, reduce the cost.
Diatomite can be applied in Brake pad Drum brake or clutch. According to the performance requirement,The recommended regular consumption of Diatomite is from 2% to 8%.
The character of Diatomite:
The main chemical composition of Diatomite is SiO2,The
 chemical formula is SiO2NH2O,and the mineral composition are opal and its variants. Except SiO2, Diatomite also contains a small amount of impurities such as Fe, A1, Ca, Mg, K, Na etc.. Diatomite often accompanied by various kinds of clay, quartz and dolomite, etc..
Property:
Si02: 75% min
A1203: 4% max
Fe: 0.05% max
L.O.I: 6% max

Product description, Product introduction:
Dolomite is White powder, the main ingredient is calcium carbonate and magnesium carbonate.The physical properties of dolomite is that Moh�??s Scale Hardness is from 4.5 to 4.0,density is from 2.8 g/cm3 to 2.9 g/cm3. Dolomite is decomposed into carbon dioxide calcium oxide and magnesium oxide when tempreture is between 700 and 900 degree centigrade. Dolomite is made by crushed Dolomite ore.It is used as friction material to for stable friction coefficient,and can improve process performance, improve the wear resistance of friction material, and reduce the cost.Dolomite used in Brake pad Drum brake or clutch.The recommended regular consumption of Diatomite is unlimited..

The character of Dolomite:
Dolomite, also known as bitter ash stone, it is the double salts of calcium carbonate (CaCO3) and magnesium carbonate (MgCO3), The theoretical ratio is: MgC03 accounted for 45.65%, and MgCO3 accounted for 4.35%. Appearance of dolomite is yellow white, Pink.The kind is of shiny crystalline white clouds and crystalline dolomite two absorption. Dolomite has good fireproof , heat insulation and waterproof performance
Dolomite can be used as friction material to reduce the cost.with application in the brake pads, the function is to improve the stability of the friction coefficient.

Property:
A1203: 0.04%
SiO2: 1.10%
Fe203: 0.23%
CaO: 33.96%
MgO: 22% min
grade:200mesh,325mesh
sieving rate: 97%

Product description, Product introduction:
The basalt rock is a kind of volcano, Mohs Scale Hardness is from 3 to 3.5,density is from 2.1 g/cm3 to 3.1 g/cm3,and the color is dark gray. Basalt is a new friction raw material, it is mainly to improve the coefficient of friction and reduce costs. Basalt is used in Brake pad Drum brake or clutch,The recommended regular consumption of Basalt is from 2% to 8%.

The character of Basalt:
Basalt is a kind of basic extrusive rock,it is formed by magma in the earth's surface by a volcanic eruption after cooling solidification and become a dense or foamy structure of rock, it belongs to magmatic rocks.
Basalt rock structure often has the shape of pores, almond-shaped structure and porphyritic structure, sometimes with a large mineral crystals, The color of unweathered basalt mainly is black ,gray, also has the color of dark brown, dark purple and celadon. Basalt volume density is from 2.8 g/cm3 to 3.3 g/cm3, the compression strength is very big which can be up to 300 mpa or even higher in dense structure, but intensity will be reduced if the impurities with crystal and porosity. Basalt has High durability and joint of which the Joint surface appear as hexagon (in basalt lava flow, rock vertical condensation surface often develop into regular hexagonal prism shape joints). Because of the brittleness of Basalt, it is not easy to be picked large pieces of stone. Although basalt is widely distributed on the earth's surface, but because of the air hole and almond construct, it is often to use as facing stone.

Property:
A1203: 15%- 18%
SiO2: 43%-49%
Fe203: 5%-12%
grade: 200mesh,325mesh
sieving rate: 97%

Product description, Product introduction:
Bentonite is clay rock with the main minerals of montmorillonite, it belongs to the aquifer shape aluminum silicate minerals. Physical properties of bentonite: Mohs Scale Hardness is from 2 to 2.5,density is 2.6 g/cm3 ,and the color is white or light yellow.Bentonite is characterized
by the natures of strong hygroscopicity, decentralization,
suspension, certain viscosity, Thixotropy and lubricity, and strong cation exchange capacity.Bentonite is used in Brake pad Drum brake or clutch, The recommended regular consumption of kaolin is from 2% to 8%.

The character of bentonite:
Bentonite is of oil luster, waxy luster, earthy luster. The fracture is of shells or dentate shape.Sodium base bentonite is dense clumps commoly, calcium base bentonite is loose earthy commonly, the surface has smooth feeling, relative density is 2- 3.Bentonite has strong hygroscopicity, the biggest water quantity is 8 to 15 times of its volume, it will expansion from several times to thirty times after water absorption.Bentonite has High plasticity and good cohesiveness. The main chemical ingredients of Bentonite are K,Na,Ca, etc., and these ingredients often exist in different content in bentonite.
The Na2O and CaO content directly affects the physical and chemical properties of bentonite.Sodium base bentonite has better expansibility and cohesiveness
than that of calcium base bentonite.To meet many application needs,it need to change bentonite base to improve the technical performance of bentonite.
Because the variety of excellent performance, bentonite can be used as binder, Filler, catalyst, stabilizer, plasticizer and thickener etc..Bentonite can be used as filler in friction material to reduce cost.

Property:
A1203: 18% min
SiO2: 56% min
Na2O+K2O: 2%-3%
PH: 8.5-10.6
expansion coefficient: 20times-30times
grade: 200mesh,325mesh
sieving rate: 97%

Product description, Product introduction:
Zeolite is a kind of new material, by aqueous alkali or alkaline earth metal aluminum silicate minerals
Main Chemical composition of Zeolite are Si02,A1203,
H2O and alkaline earth metals, Si02 and A1203 content is about 80%.Physical properties of zeolite: Moh�??s Scale Hardness is from 3.5 to 5.5,density is from 2.1 g/cm3 to 2.5 g/cm3.Zeolite Has good performance of adsorption, cation exchange properties, catalytic properties, heat resistance, acid etc.Zeolite is used as friction material to for stable friction coefficient,and can reduce the cost.
It can be used in brake pad drum brake or clutch. The recommended regular consumption of zeolite is from 2% to 8%.

The character of Zeolite:
Zeolite is the floorboard of the family of zeolite minerals, a frame structure, is a kind of aqueous alkali or alkaline earth metal aluminum silicate minerals. At present our country found more than 10 kinds of natural zeolite,such as clinoptilolite ,mordenite zeolite, alkali ling zeolite and calcium cross,but widely used only clinoptilolite and mordenite zeolite.Zeolite has many function and usage.
Zeolite density is small, high foam, good activity, zeolite water of crystallization and the general structure of water (OH) is different, because it as water molecules, the zeolite water under a certain temperature heating, the lattice structure are not destroyed after dehydration, the location of the original molecules there are still gaps, form a lattice structure, sponge with water and gas suction space feature, when the temperature rises, the zeolite cavity that the larger molecules to enter, cooled molecules trapped within the cavity and keep for a long time, until the heat release. The characteristics of zeolite was known as the "boiling". Foreign patent added zeolite in friction material to absorb gaseous and liquid molecules emitted by thermal decomposition to achieve the purpose of reducing thermal annealing

Property:
SiO2: 65%min
A1203: 18% -22%
Zeolite content: 60% min
grade: 200mesh,325mesh
sieving rate: 97%

Fused Calcium Aluminate is fused in the electric arc furnace with the high quality raw materials. It is an indispensable refining agent in the process of refined steel making in steel industry. It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant, and good safety performance,good arc burying effect, reduce the erosion of lining by the arc, increase the service life of the ladle. This product does not absorb the water, does not powder, and easy to store and transport.
For more informaion

1, Product Description
This product is a kind of heat preservation coating agent for casting riser, which is the best solution to the solidification and shrinkage of feed head. This product is in refinement control. According to different size of riser and condensing shrinkage principle, we can control heating duration & time of heat preservation, in order to achieve maximum heat supply effect.

2, Product Properties
1, Reduce the use of riser insulation sleeve and save cost;
2, Make the gas evolution and inclusion floatation gradually inside of the casting, reduce waste product rate caused by pore and slag, to enhance comprehensive benefit;
3, Reduce riser weight more than 50% , improve technological yield more than 10%, and also decrease energy consumption.
4, Provide corresponding tailored schemes according to riser design of the customers, in order to achieve the best heat preservation effect.

3, How to use
During pouring, while the molten metal surface rises to 1/2 or 2/3 height of feed head, cast adequate amount of agent one-time, and stop pouring as the agent appears from the feed head gradually.

Physical & Chemical Properities After high temperature expansion, it has the characteristics of porous structure, light weight, low thermal conductivity, stable chemical composition, thermal insulation, non-combustible, non-toxic and tasteless, sound absorption and environment friendly
Application 1. Heat/sound/low-temperature/oxygen preservation or insulation material in various fields
2. Foundry material as covering agent to clear up slag for metal casting
3. Perlite filter aid used in foundry, food, drink, medicine, chemical,etc
4. Agricultural / horticultural / hydroponics /soilless culture perlite as seedings growing media
5. Widely used in construction, metallurgy, petroleum, machinery, light industry, water and electricity, casting, medicine, food, agriculture and horticulture fields.

Physical & Chemical Properities "1. Cost reduction;
2. Weight reduction;
3. Non-combustible;
4. Thermal insulation;
5. Sound absorption;
6. Good Fluidity;
7. High thermal stability;
8. Low density;
9. High particle strength
10. Low water absorption
11. Stable property "
Application 1. Spherical particle, surface vitrified, good fluidity while mixing, good workability, mixed evenly shortly, then reduce the aggregate broke when dry-wet mixing, good thermal property and mechanical property.
2. Can be used in a wide variety of paint and coating systems to reduce VOCs, improve flow and leveling characteristics, and enhance chemical and wear resistance properties.
3. Low water absorption, easily controlled in mortar, low shrinkage, no hollowing and cracking, stable thermal property and mechanical property, increase the mortar service life.
4. Can used in boards and panels for both commercial and residential interiors.The boards are comfortable to handle and easy to cut and fasten like wood.

Physical & Chemical Properities "1. Cost reduction;
2. Weight reduction;
3. Non-combustible;
4. Thermal insulation;
5. Sound absorption;
6. Good Fluidity;
7. High thermal stability;
8. Low density;
9. High particle strength
10. Low water absorption
11. Stable property "
Application 1. Spherical particle, surface vitrified, good fluidity while mixing, good workability, mixed evenly shortly, then reduce the aggregate broke when dry-wet mixing, good thermal property and mechanical property.
2. Can be used in a wide variety of paint and coating systems to reduce VOCs, improve flow and leveling characteristics, and enhance chemical and wear resistance properties.
3. Low water absorption, easily controlled in mortar, low shrinkage, no hollowing and cracking, stable thermal property and mechanical property, increase the mortar service life.
4. Can used in boards and panels for both commercial and residential interiors.The boards are comfortable to handle and easy to cut and fasten like wood.

Physical & Chemical ProperitiesThe closed-cell perlite has the characteristics of high temperature resistance, low water absorption, good mixing and dispersibility.
Application1. It is the main aggregate of insulating mortar, refractory material, decorative board, insulation board and riser coving agent for casting.
2. It is also used in metallurgy, industrial furnace, electric thermal insulation, heat pipe and other high-grade thermal insulation materials.
3. High fineness closed-cell perlite can be used as rubber enamel, paint and plastic filler.

Physical & Chemical ProperitiesAfter high temperature expansion, it has the characteristics of porous structure, light weight, low thermal conductivity, stable chemical composition, thermal insulation, non-combustible, non-toxic and tasteless, sound absorption and environment friendly.
Application1. Heat/sound/low-temperature/oxygen preservation or insulation material in various fields
2. Foundry material as covering agent to clear up slag for metal casting
3. Perlite filter aid used in foundry, food, drink, medicine, chemical,etc.
4. Agricultural / horticultural / hydroponics /soilless culture perlite as seedings growing media
5. Widely used in construction, metallurgy, petroleum, machinery, light industry, water and electricity, casting, medicine, food, agriculture and horticulture fields.

Our advantages:
1. High purity
- Control the consistency of raw material from the mine resource.
- Introduce automatic whole-process equipment to ensure product consistency.
- Not allowed any harmful impurities during raw material & production process.

2.Fine classification
- Choose different raw materials according to their characteristics.
- Various product category, to provide customized slag treatment scheme

3. Environment friendly & health
- The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal.
- The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health.

4).Mechanism of slag removing
- Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and
- Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which
sticks to the scum in the metal, to make slag collected and removed.

Mica powder
Mica powder is a non-metallic mineral, containing a variety of ingredients, including the main SiO2, the content is generally around 49%, Al2O3 content of about 30%. Mica powder has good elasticity and toughness. Insulation, high temperature resistance, acid and alkali resistance, corrosion resistance, strong adhesion and other characteristics, is an excellent additive. It is widely used in electrical appliances, welding, rubber, plastics, paper, paint, paint, paint, ceramics, cosmetics, new building materials and other industries, the use of a very wide range. With the development of science and technology, people have opened up a new field of application.
Mica powder application

1. coating are
Mica powder coating is a kind of new green environmental protection packing, unique two-dimensional sheet barrier, UV shielding, chemical structure stability effectively improve the coating's penetration resistance, weatherability, abrasion resistance and corrosion resistance. Also, excluding any radioactive elements, leading the trend of environmental protection in coating field. It is widely used in building exterior wall coatings, anti-corrosion coatings, powder coatings, high temperature resistant coatings, insulation coatings, waterproof coating, paint, paint, paint and some special coating.
2 cosmetics field
Makeup grade mica has unique sheet structure, silky luster and silky texture, the silty cosmetics like silky light and delicate. Natural texture let skin has excellent affinity and crystal beautiful effect, giving cosmetic touch soft, soft luster, good appetency, paste skin force is strong wait for a characteristic, is the cosmetics industry preferred high-grade powder materials.
3 plastics field
The plastic mica powder has the characteristics of high thickness ratio, high temperature resistance, acid and alkali resistance, abrasion resistance, etc., and is a kind of natural functional powder filling material. Company select high-quality mica ore, the unique wet grinding and peeling and purification technique, mica lamellae cleavage completely, save the mica unique high diameter thickness ratio structure (diameter to thickness ratio is as high as more than 100), make it in plastic products with prominent enhancement effect, and gives plastic plastic products excellent dimensional stability; the product itself characteristic of high temperature also greatly improve hot plastic deformation thermometer Vicat softening point, applicable to high temperature condition of parts and products, mica and glass fiber compared with smooth product surface, no warping deformation characteristics. Products are widely used in PP, PA, PBT, PET and other plastic modification, plastic masterbatch, engineering application.

OEM and ODM irregular shaped bentonite cat litter
Characters:


1) 100% sodium bentonite clay cat litter
2)Strong absorption ability, Fast condensation..
3) Ultra low dust, clean and eco-friendly
4) Super deodorant effect
5) Safe and Hipo-Allergenic



Date Particle size Appearance water
water
absorption(2h)
Density
(g/ml)
Compressive
strength
Value 0.5-3.0mm irregular crushed particles =9% =350% 0.8-0.9 9.9N min




OEM and ODM irregular shaped bentonite cat litter



Packaging: 5KG/10KG/8L
OEM 5L/10L/many options
Outer packaging: craft paper bag, carton, Ton bag

OEM and ODM irregular shaped bentonite cat litter
OEM and ODM irregular shaped bentonite cat litter



OEM and ODM irregular shaped bentonite cat litter


Fragrance: Many options for your choice
Lemon, Lavender, Apple, Rose,Orange, Green Tea, Baby powder, Forest, Honey, and so on.


ECOLIEF brand 8L
OEM and ODM irregular shaped bentonite cat litter
OEM and ODM irregular shaped bentonite cat litter



MEIPENG Brand 5KG/10KG
OEM and ODM irregular shaped bentonite cat litter
OEM and ODM irregular shaped bentonite cat litter


OEM Service:

We have provided OEM for many customers from domestic and Abroad. We could produce for you according to your packing design or we can help you to design the packages.

OEM and ODM irregular shaped bentonite cat litter

Non-stick aluminum castable is specially developed for the aluminum and alloy industry developed ultra-low cement castables, the use of high-quality silicon carbide, fused corundum, selected bauxite as the main raw material, together with high-quality additives through scientific ratio, refined to make. With integrity, high strength, corrosion resistance, anti-peeling, anti-penetration, good thermal stability, non-stick aluminum, non-stick and other characteristics.