Cr around 42% Fe 15%max Al2o3 3% max Sio2 4% max P 0.05% max S 0.05% max Cr/fe: 2.5:1 min Size 10-300mm Quantity 3000mt Port of discharge: tianjin xingang Shipment: in bulk or in containers
Mn around 50% Fe 5%max Al2o3 3% max Sio2 4% max P 0.05% max S 0.05% max Size 10-300mm 95%min Quantity 3000mt Port of discharge: tianjin xingang Shipment: in bulk or in containers
Analysis: %pb 71.93 %zn 0.87 %fe 0.15 %ag 0.02 %cd n.D %as n.D %sio2 3.60 %s2 11.65 N.D denotes "not detectable".
Chorme ore. In bulk
Buy all kinds of lead ores, lead residues
Buy:copper ores, copper residues Copper>10% Packing in bulk or 1 ton package bags
Ferro chorium Guaranteed specs Cr: 60%min C:6-8% si:2.5%max s:0.025%max p:0.03%max Size:10-50mm or 10-100 90%min Delivery date: Within 30 days shipment after receiving TT paymentPacking: In 1mt PVC woven bag in 20' containers
Ferro chrome Cr60%min, c0.06%max, si1.50%max, p0.04%max, s 0.03%max 1mt wowen bag
Lead ore
Copper ores.
Spodumene And Lithium Mica, Crystals, Copper Ore, Zinc Ore Etc..
Bentonite, barytes, xanthan gum, calcium chloride, calcium bromide.
Brown fused alumina, white fused alumina, black fused alumina, silicon carbide, calcined bauxite, bauxite ore.Manufacturer
What is ferrochrome? Ferrochromium is made using metallurgical grade chrome ore and can be divided into three categories, depending on the level of carbon in the alloy. The three types of ferrochrome alloys are: High-carbon (HC) ferrochrome (carbon content between 4% and 9%) Low- and medium-carbon (LC & MC) ferrochrome (carbon content less than 0.5% for LC and between 0.5% and 4% for MC) Ferrochrome-silico-chrome (FeSiCr) Ferrochrome applications: Production of steel, especially stainless steel with chromium content of 10 to 20%, is the largest consumer of high-carbon ferrochrome. Over 80% of the worldâ??s ferrochrome is used in the production of stainless steel. The vast majority of ferrochrome produced is� charge chrome, which has a lower chrome content ratio. Used most commonly in stainless steel. Low carbon� and� medium carbon� ferrochrome is used in the manufacture of special steels. Low carbon ferrochrome can be used to produce superalloys.
INTRODUCTION: Zircon sand, also known as zircon, is a mineral composed mainly of zirconium silicate (ZrSiO4). Pure zircon sand is a colorless transparent crystal. FORM OF ZIRCON ZIRCON SAND ZIRCON POWDER APPLICATION: To be used in Ceramics. Opacity, whiteness, wear resistance and moisture resistance make it a key component of ceramic tiles, sanitary ware and tableware. To be used in refractory industry to protect the interior of high-temperature furnaces To be used in foundries and precision casting processes for the casting of metals and alloys into various products due to the thermal stability, high melting point and abrasion resistance provided by zircon. Another important application is the production of a broad range of zirconia chemicals, which in turn, have a diverse range of end uses including ceramics, refractory, catalysts, coating electronics and biomedical related products. Some zircon is used as an x-ray filter and as a polishing agent in the production of silicon wafers for the manufacture of semiconductor components such as integrated circuits (computer chips).
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.Itâ??s characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3â?¥75% Fe2O3â?¤3% K2Oâ?¤1% TiO2â?¤4% , the others: very low 2.Grain Shape: Ball 3.Colour: Brownish black 4.Density: 1.95-2.05 ( g/cm3) 5.Refractory temperature:1850â?? 6.Thermal expansion Rate:0.13% 7.Size: 10-20meshã??20-30meshã??30-40meshã??40-70meshã??100-140meshã??170mesh with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.Itâ??s characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very low 2.Grain Shape: Ball 3.Colour: Brownish black 4.Density: 1.95-2.05 ( g/cm3) 5.Refractory temperature:1850 6.Thermal expansion Rate:0.13% 7.Size: 10-20mesh 20-30mesh 30-40mesh 40-70mesh100-140mesh 170mesh
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3%
Ceramic Foundry Sand Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3% K2O 1% TiO2 4% , the others: very
