Hello My name is Aleksander and I am a representative of the German-Chinese company "Gerchi". It is a manufacturing and trading Our diatomite is considered of high quality and suitable for various manufacturing and appliance processes from: Filtering media Functional additives Absorbents Soil amendments Natural insecticide Chemical properties: SiO2 51 â?? 72% Al2O3 10-16% Fe2O3 2 7 % MgO traces Na2O 2-4% K2O 1.2% TiO2 traces MnO traces P2O5 traces Physical Properties: Oil Absorption 47-72 gr/100 gr pH 6.2 - 8.1 Surface area 23 - 62 m.sq gr Dry density 660 - 792 kg / cu. M Specific gravity 2.27 - 2.6 Size, as per customers requirement.
Keyway Industrial Limited Colloidal silica What is Colloidal Silica/ Silica Sol? Colloidal silica is a dispersion of amorphous silicon dioxide (silica) particles in water. These amorphous silica particles are produced by polymerizing silica nuclei from silicate solutions under alkaline conditions to form nanometer sized silica sols with high surface area. A charge is then induced on the silica nanoparticle surface that allows the silica particles to repel one another and form a stable dispersion, or colloid. Colloidal Silica Characters: Colloidal silicas are produced in a variety of grades that range in a number of factors. Particle size typically varies from 5nm to 40nm, and particle size distribution can vary from narrow to wide depending on the manufacturing process. Standard colloidal silica is stable at a pH from 8 - 10.5 and carries an anionic surface charge that is stabilized with sodium or ammonium. In certain grades, some of the silicon atoms in the silica particle are replaced with aluminate ions to allow for enhanced stability in a wider pH range, usually 3.5 - 10.5. Colloidal Silica Application: Densification of concrete, cement, and other materials. Fine retention in paper manufacturing. Enhanced bonding of waterborne adhesives. Improved surface friction and anti-slip properties. Wastewater filtration flocculant. Investment casting binding. Anti-soilant textile coatings.
Chemical Name: Fluorspar Other Name: calcium fluoride, fluorspar, CaF2, fluorspar powder, fluorite, Chemical Formula: CaF2 CAS No: 7789-75-5 Molecular: 78.08 EINECS No.: 232-188-7 H.S.Code: 2826199090 Chemical Properties 1) Crude ore- 25 to 30% 2) Metallurgical grade- 75 to 82% 3) Ceramic grade- 94 to 96% 4) Acid grade- 97% 5) Crystalline grade- 99% Physical Properties Various granulations available from lump to superfine powder (45 microns) Typical Applications Three main commercial grades of fluorspar are distinguished: metallurgical grade (75-82% CaF2), ceramic grade (94-96% CaF2) and acid grade (97% CaF2). Metallurgical grade fluorspar (metspar) representing almost one third of world production volume is used in the manufacturing of aluminium and stainless steel, in extraction of metals such as niobium and tantalum, in metal processing to remove unwanted impurities and in various other applications.
The sodium bentonite produced by our company is modified by artificial wet sodium.The montmorillonite in the natural bentonite is fully ion exchanged, thereby improving the physical and chemical properties of the bentonite. Therefore, refined sodium bentonite has higher application value and economic value. Application: 1. Because this product has stable suspension and thickening properties, it can be used as an anti-sedimentation and thickening additive for water-based coatings. 2. It can be used as molding sand and drilling mud in mechanical casting 3. Textile printing and dyeing, filling, bleaching,anti static coating, sizing instead of starch, etc.
Introduction: High Titanium Slag (High Titanium Slag) is a common name for high-content enrichment of titanium dioxide produced by melting and separating titanium dioxide and iron in ilmenite by means of electric furnace heating and melting. Its main component is TiO2, which usually has 90% and 92% content specifications. It is a high-quality raw material for the production of titanium tetrachloride, titanium and titanium sponge. Main Chemical Composition: TiO2 Appearance: Black Powder Application: to be used to produce titanium tetrachloride, welding rod, titanium dioxide Packing: 25KG/bag, 1 ton/bag, according to customer requirements.
We are a professional Kaolin manufacturer in China . Our calcined kaolin 4000Mesh have a good application in paint ,ink ,coating ;1250Mesh have a good application in rubber industry ;325Mesh have a good application in ceramic glaze industry .
Characteristics of sintered calcium aluminate: 1) Uniform chemical composition, low melting point and fast melting speed can shorten the refining time; 2) No fluorine, no erosion of furnace lining and ladle; 3) Compact structure, no water absorption, easy storage and transportation; 4) Due to the stable phase and fast slag formation, it can reduce the dust pollution to the iron and steel plant and comprehensively stabilize the refining process; 5) It does not contain impurities such as hydrogen, nitrogen and carbon, which is conducive to improving the quality of steel. Sintered calcium aluminate (premelted aluminum calcium slag) is mainly used in LF furnace, open hearth furnace and converter ladle refining to remove impurities such as sulfur and oxygen in molten steel and reduce the content of harmful elements and impurities in steel. It is suitable for ordinary carbon steel, high carbon steel, high and low alloy steel.
Calcined Kaolin is representative of high quality hard clay in China. After calcined , Al203 contents about 44-46%, Fe203 contents 2% max, the composition is stable , uniform and dense structure, with the white colour after calcined, it s the good raw material in the refractory industry.
Characteristics of sintered calcium aluminate: 1) Uniform chemical composition, low melting point and fast melting speed can shorten the refining time; 2) No fluorine, no erosion of furnace lining and ladle; 3) Compact structure, no water absorption, easy storage and transportation; 4) Due to the stable phase and fast slag formation, it can reduce the dust pollution to the iron and steel plant and comprehensively stabilize the refining process; 5) It does not contain impurities such as hydrogen, nitrogen and carbon, which is conducive to improving the quality of steel. Sintered calcium aluminate (premelted aluminum calcium slag) is mainly used in LF furnace, open hearth furnace and converter ladle refining to remove impurities such as sulfur and oxygen in molten steel and reduce the content of harmful elements and impurities in steel. It is suitable for ordinary carbon steel, high carbon steel, high and low alloy steel.
Sintered Calcium Aluminate ( Sintered Refining Slag) is calcined in the rotary kiln with the high quality raw materials.It is a good quality refining agent.It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant,reduce the consumption of the ladle refractory materials,increase the service life of the ladle.
Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel casting foundry sand.It is characteristic as high temperature resistant,small amount of thermal expansion, easy collapse, good renewable performance,good casting properties, received the recognition from the cast made experts domestic and overseas. Widely used in all kinds of casting method,sand casting, special casting( casting, solid type, evaporative pattern casting, ladle flow guiding sand and so on ).Also used for shot peening, low expansion of high-temperature coated sand producing. 200mesh-270mesh used for evanescent mode coating producing. Adding 10-35% can effectively increase the air permeability, and suitable for using all kinds of casting binder.It has been used by numerous domestic and international cast iron and nonferrous metal casting production factories. Ceramic Foundry Sand Technical Specification: 1.Chemical composition: AL2O3 75% Fe2O3 3%
Microsilica/ silica fume manufacturer in China densified 85,92,95 and undensified 85,92,95
Sintered Calcium Aluminate ( Sintered Refining Slag) is calcined in the rotary kiln with the high quality raw materials.It is a good quality refining agent.It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant,reduce the consumption of the ladle refractory materials,increase the service life of the ladle. For more information, check
85D/90D/92D/95D 85U/90U/92U/95U densified microsilica sio2 85% min
Dewatering screen is widely applied for dewatering, desliming, deintercalation, which can be used to sand and stone washing plant, coal preparation plant, sludge recycling, mineral processing plant, tailings dry discharge and more. So it is also called sand and stone dewatering screen, mine dewatering screen, coal slime dewatering screen, tailings dewatering screen, high frequency dewatering screen. Base on lower water content sand is well needed and sold in market, we do research and manufacture a series new type dewatering screen. TS dewatering screen is mainly used in mining, construction for coarse or fine sand dehydrate processing.With the advantages of simple structure and easy maintenance, it becomes a hot seller in our market.
FUSED MULLITE Fused mullite is made of high-purity quartz sand and industrial alumina, melted in super large electric arc furnace, and can be processed into particles, fine powders and micro powders with different sizes. It has white color, low carbon residue and well-developed acicular crystals. With the characteristics of low porosity, low impurity content, and good thermal shock resistance and wear resistance. It is widely used in glass kiln lining brick, alkali free glass sedimentation tank, hot blast stove brick of large smelting blast furnace, low creep sillimanite brick of blast furnace, ceramic kiln furniture, box antimony, shed plate, petrochemical industry and other industries.
Sintered Calcium Aluminate Sintered Calcium Aluminate ( Sintered Refining Slag) is calcined in the rotary kiln with the high quality raw materials.It�¢??s a good quality refining agent.It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant,reduce the consumption of the ladle refractory materials,increase the service life of the ladle.
Fused quartz from 200nm to 2.2um has high transmittance and low thermal expansion coefficient, which makes it an ideal choice for spherical lens in ultraviolet ray, visible light and near infrared spectrum applications with strict requirements. Spherical lens is commonly used to improve signal coupling between optical fibers, transmitters and detectors, as well as objective lenses in endoscopy and bar code scanning applications. Hemispherical lens simplify the integration of the whole system.
RSiC Sagger(crucible) have excellent properties of 1650C high temp+high strength+oxidization resistance +corrosion resistance, instead of Alumina or Quartz or other sic material, speically for battery materials firing, showing excellent performance,as ideal kiln furniture & machine parts. #rsiccrucible #rsicsagger #siccrucibles #chinasicceramics
Calcined Kaolin: Calcined Kaolin is representative of high quality hard clay in China. After calcined , Al2O3 contents about 44-46%, Fe2O3 contents 2% max, the composition is stable , uniform and dense structure, with the white colour after calcined, it is the good raw material in the refractory industry.
