Portland Cement, Mineral Powder, Steel Slag, Super Fine Fly Ash And Other New Concrete Admixtures .
natural Talcum powder99%, with the highest quality and pure, price is according payment procedures.
Silica fume, also known as condensed silica fume or microsilica, is a spherical sub-micron amorphous silicon dioxide used in many applications. Silica fume is a co-product of silicon or ferrosilicon production, consisting of ultrafine (sub-micron), amorphous, non-porous, perfectly spherical silicon dioxide (SiO2) particles, with purity levels of 85 to 99 %. The main effect of these ultra-fine particles is to greatly improve particle packing and produce a highly pozzolanic reaction in concrete and other cementitious bond systems where the silicon dioxide reacts with calcium hydroxide, heightening performance levels and the strength and durability of these materials. Additionally, silica fume, because of its amorphous (non-crystalline) structure and its specific area, provides other useful features to various applications, including improved sintering capabilities and enhanced high temperature performance of refractory castables, resulting in reactions between microsilica and other components of the refractory mix. To summarize, silica fume has two key features which alone or in combination are the basis for its high performance: The nano-sized spherical non-porous particles create an efficient "filler effect" Primary particles have an average diameter of about 0.15 �¼m (150 nanometers) Microsilica is a highly reactive form of silica producing a "chemical effect" Thanks to its amorphous nature and high specific surface area.
Item No Index Measured Value Appearance White powder Compliance index Specific surface area of nitrogen adsorption m/g 200±10 200 Sio2- content >99.8 99.9% PH 3.7-4.5 4.19 Volatile matter % at 105 �ºC â?¤3.0 0.82 Tamping density g/dm�³ 30-60 31 Sieve residue(45�¼m) mg/kg â?¤250 19.93 Fumed silica is a very useful industrial chemical used in a variety of industrial and consumer products. Fumed silica poses a variety of health hazards to workers in various end-use industries and to those using products that use fumed silica. 1. in various resin additives, medicine, food and other fileds. 2. rubber, sealant, silica gel, adhesive, tile grout etc. 3. paint, coating, UPR, 4. CMP suspension etc; 5. Digital photo paper etc.
Anyang Lishi Industrial Co., Ltd. is a professional Sodium Feldspar Manufacturer that specializes in providing raw materials for the Ceramics, Glass, Coatings Material, Plastic, Refractory, and also applicable in various other industries, including paints, rubber, soap, construction materials, water filtration, abrasives, and fertilizers. Our sodium feldspar production facility covers an area of 45,000 square meters and is equipped with state-of-the-art production equipment, a factory laboratory, and a testing center. This ensures that we can deliver high-quality sodium feldspar products to our customers. As one of the top sodium feldspar suppliers in China, we have our own sodium feldspar mines, strict quality control, timely delivery, and professional services. We serve customers in over 200 countries, including Vietnam, the Philippines, Russia, Italy, Mexico, the United States, Morocco, and more. Sodium Feldspar Forms: Grains 0-10mm, Powder (100-1250 Mesh). â?¢ Sodium Feldspar Package: 1000-1300kg per bags. Advantages of Sodium Feldspar High sodium and High aluminum content, has nepheline properties and good transparency Low Silicon and without free silicon, it's harmless to the body Na 11% around, Fast burning at a lower temperature, save cost Properties of translucent nepheline Good transparency
As the important metallurgical containers, the slag pot plays an important role in steelmaking production and steel slag processing. The slag pots in Tenfaye are cast steel slag pots, which are divided into 2.13m�³, 4m�³, 5m�³, 9m�³, 12m�³, 16m�³, 18m�³, 20m�³, 24m�³ and other types of slag pots. Slag pot weight: 5-75 tons. Common material of slag pot. A comprehensive data bank containing previous experiences combined with advanced software implementing the Finite Element Analysis serves custom engineered design optimization.� According to the requirements of the customer's drawings, appropriate wooden molds can be selected for modeling design. Huazhu CAE is used to simulate pouring before pouring. Strictly follow the wooden mold - modeling - smelting and pouring - insulation - sand removal from the pit - heat treatment - rough and fine processing - packaging and delivery process, integrated casting, strong deformation resistance, and casting high-quality slag pot.
1, 30% less welding fume 2, High quality rutile used to ensure good weldability 3, Longer shelf life
Precipitated silica for toothpaste includes comprehensive type, thickening type, high thickening type, friction type, high friction type and friction transparent type, etc.. The self-developed friction-type and friction-transparent abrasives for toothpaste have the characteristics of good stability and obvious cost advantages.
Precipitated Silica is an active filler and reinforcing agent in rubber tyres and rubber products, which can improve the mechanical properties, abrasion resistance, and thermal properties It can also improve the tensile strength, tear strength, abrasion resistance and flexibility of rubber products and tires.
Precipitated Silica is high purity, good flowability white granule or powder , with high adsorption and flow promotion properties its two main functions are as carrier and anti-caking agent. As Carrier It is good carrier for various feed flavoring agents, vitamin mold inhibitors, acid inhibitors, antioxidants, choline chloride, allicin and other products. As Anti Caking Agent . It is also used as anti-caking in fluffing agent, , premix, trace elements, vitamins and other products.
SiO2% 14-16 Specific Gravity 1.08-1.09 Na2O% 0.5 PH Value 25 9-11 Viscosity(25, mPas) 6.5 Particles Size(nm) 2-7 Shelf Life 6 months application to #PulPaperMaking -improve fiber and #finesretention -improve colloidal retention -improve starch retention -improve #dewatering (#drainage, #pressing, and #drying) -improve formation -improve runnability -reduce downtime and off-quality production
China leading manufacturer since 1998. annual production capacity 200,000MT. SGS certified Quality assurance . More solutions will be offered as per customers' request. HS-515 SiO2% 14 16 Specific Gravity 1.08 1.09 Na2O% 0.5
AI2O3(%):36-38 Fe(%):0.5-0.9 TiO2(%):1.4-1.8 COD:300-4000ppm If you are interested in FREE SAMPLE, please contact us. :)
Specification 1.Appearance: Black powder. 2.Application: Anode materials for lithium ion batteries. 3.Main features: High capacity, compact density, good cycle performance of charge and discharge. Our Graphite raw material products supply : Graphite powder can be divided into two main categories: 1. Natural graphite 2. Synthetic graphite Among them, natural graphite has the following kinds: 1. Flake graphite 2. Spheroidal graphite 3. Micronized graphite 4. Expandable graphite 5. Soil graphite
EDM is a process that high temperature is produced by direct electric discharge between work piece and electrode, and duplicate work piece under high temperature as per electrode shapes and accuracy. The work piece of EDM are usually with complicated shapes or high hardness which makes it difficult to mechanically machine. EDM becomes necessary process in metal molds making industries currently. Applications: Automotive Mould Industry Mechanical Metallurgy Light industry Electrical
Vibrating,Extruded,Molded,Isostatic Graphite Block uses the particle size in 2 and 0.8 mm ,15�¼m and etc for different types of graphite blocks has advantages such as high temperature resistance, oxidation resistance, low content of impurities, single large size, low manufacturing cost advantages. Medium Grain Graphite has good mechanical, electrical and thermal properties, with low ash content. Machined parts, such as plates, bricks, discs, crucibles and sleeves can also be manufactured. Application:Solar photovoltaic, EDM, Semiconductor Metal Continuous Casting, Mold Industry, Precision Ceramic Sintering, High Temperature Corrosion Resistant Containers, Automobile Industry, Mobile Communication Industry, etc.
Carbon Block mainly used for laying the bottom, hearth, lining of steelmaking blast furnaces. Including graphitized carbon blocks, semi graphitized carbon blocks, high thermal conductivity carbon bricks, microporous carbon bricks, etc
Silicon Slag Silicon Metal Slagis a byproduct from the manufacture of silicon metal it is a kind of mixture which contains the main content Silicon 3565 and other components such as C S P Al etc It is a good substitute for FeSi in steel making which has advantage in lowing the cost of production and reusing resource Usually we use silicon slag to produce silicon briquette which is far and wide market in domestic and internationalour silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors Aluminum manufactures to improve the useful properties of aluminum as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic
Product Description Graphite block is made of domestic petroleum coke, with carbon content above 99%. We have vibrated molded and isotropic graphite block. They are widely used in such fields as mechanical , electronics, chemical industry and other new industries. We can machine to specific shapes according to customers' requirements.
Graphitized petroleum coke takes petroleum coke as raw material, puts petroleum coke in graphitization furnace, and makes it through graphitization processing technology, and has the same performance and physical and chemical indexes as the products produced by traditional production technology.Let all customers with our cooperation truly feel "value for money, value for money"
