DWDM multi-channel multiplexer /demultiplexer (Mux /DeMux)modules are available on ITU channel spacing of 200GHz. They demonstrate low loss, temperature insensitivity and reliable performance in any system application.Mux/DeMux modules offer low-cost wavelength management solutions that are suitable for long haul, metro, and access application. Features: 1) Standard size, light weight and reasonable structure 2) Splice tray inside changeable 3) 19-inch standard size, light in weight and robust structure 4) Suitable for ribbon and single fiber 5) Various panel plate to fit different adapter interface 6) Front mark on the plate is easy for identification and operation 7) 24C, 36C, 48C, 96C,144C optional, with or without fiber optic pigtails and adapters 8) Easy for management and operatio
Fiber optic patch cord ,Precise connector, Customized length, Excellent mechanical capability, insertion loss
Features Factory-terminated provide consistent quality, high performance and reduce installation time 100% tested for low insertion loss performance and high return loss MPO female to 4 x LC duplex harness cable Save Time & Space OM4 (OM3) 50/125 m Fiber Optimized performance available in elite MTP and discrete premium connector LSZH Jacket by Default
Indoor OM4 OM3 MTP MPO Fiber Optic Patch Cord Industrial Protection The OSFP-SR8 or MPO jumper with the 16F MPO connector is used for the connection between OSFP-SR8 400G optical transceiver module in the data center. It can fully meet the harsh high-speed network with Low insertion loss, high return loss by using the high quality cable and MPO components.
Signal Fire AI-7C Fusion Splicer for sale 6 motors ,auto focus ,core alignment, 3 in 1 fiber holder ,10 languages to switch freely,5 years warranty.
Signal Fire ai9 Fusion Splicer for sale 6 motors ,auto focus ,core alignment, 3 in 1 fiber holder ,10 languages to switch freely,5 years warranty. (OEM service are accpetable)
Signal Fire AI-8C Fusion Splicer for sale 6 motors ,auto focus ,core alignment, 3 in 1 fiber holder ,10 languages to switch freely,5 years warranty. (OEM service are accpetable)
Signal Fire AI-7C Fusion Splicer for sale 6 motors ,auto focus ,core alignment, 3 in 1 fiber holder ,10 languages to switch freely,5 years warranty.
ï¼?1ï¼?Product descriptionï¼? USB 3.1 Gen 2 Hybrid active optical cables use fiber optics for data transfers, which is further paired with copper wires for control and power. Slim USB type C to C fiber optic cable with high performance, low power consumption and low cost. Using optical fiber to replace copper wire as the highspeed signal transmission medium, It can perfectly transmit 5G/10G high speed up to 100meters. Compared with the traditional copper wire, it is much longer, softer, thinner, with better signal quality and perfect EMI/EMC feature. It is only one-directional, not bi-directional. Please ensure the "Source" and "Display " connector connect with the relevant device before wiring. ï¼?2ï¼?Product Features ï¼? · Long distance transmission, up to 100 meters · Support 5G/ 10G super high speed · Plug and play · Thinner, lighter and softer than conventional copper cable · Highly resistant with EMI and RFI · No need to supply extra power. Simplified Schematic ï¼?3ï¼?Advantages: Compared with the traditional copper wire, it is much longer, softer, thinner, ligher and more flexible, with better signal quality and perfect EMI/EMC feature. ultra low signal attenuation and latency ï¼?4ï¼?Installation And Testï¼? ï¼?5ï¼?Applications: This cable complies with USB 3.0, and the main application is to transmit the audio video signals between computer, TV, monitor and projector with USB Type C interface. Widely used in Digital signage,home theater, LED signboards in streets and in stadiums, medical imaging equipment, video surveillance & control system ,VR equipment, performance & art center, video conference,Blue-ray, 3D video, projector, set-up box, DVR, game console,etc. ï¼?6ï¼?Note: This Type-C active optical cable is only one-directional , not bi-directional. Please ensure the "Source" and "Display " connector will connect to the relevant device before wiring. ï¼?7ï¼?Packagingï¼? ï¼?7ï¼?Variant and Comparison A) To meet the customers' requirement of more durability of the cable,we can add nylon braid over the PCV jacket B) Cable more than 50meters ï¼?we will use a plastic reel for packaging. ï¼?8ï¼?Why Us: a ) As A State-owned Enterprise With Long History In Wire and Cable Industry Jiuzhou Group (JEZETEK) was established in 1958 as a stated-owned enterpriseï¼?and started to entry in wire and cable industry as early as 1970. b ) With Strong R&D Capability of Wire and Cableï¼?Independent Laboratory and Testing Equipment for Quality Control c )Have Owned Lots of Honors till it established d ) The company has successfully passed certification of SGS, ISO9001: 2000,ISO14001:2015 and OHSAS 18001:2007. And its products have obtained RoHS, CE, UL certificates.
Description: ADSS cable is loose tube stranded. 200um or 250um fiber, is positioned into a loose tube which made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath. Characteristics: Can be installed without shutting off the power. Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kV. Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops Large span lengths and the largest span is over 1000m. Good performance of tensile strength and temperature. The design life span is 30 years.
Application: *Long Distance Trunk Network, Metropolitan Area Network, Access Network l *DWDM System *Fiber CATV Network, Fiber Data Network *Optical Active Accessories Features: *Low insertion loss, *High return loss *Good repeatability and exchangeability
SC/UPC to SC/UPC 62.5/125um Multi-mode Fiber Optic Patch Cord Jump Cable 5meters SC stands for Subscriber Connector- a general purpose push/pull style Connector developed by NTT. SC has an advantage in keyed duplexibility to support send/receive channels. Specifications: Connector SC to SC Jacket OD 1.2/1.8/2.0/3.0mm Fiber Mode 62.5/125μm Jacket Color Aqua blue Polishing UPC to UPC Jacket Material PVC(OFNR), OFNP, LSZH Insertion Loss â?¤ 0.2dB Fiber Glass CORNING or Equivalent Fiber Return Loss â?¥ 35dB Wavelength 850/1300nm RoHS Compliant Yes Work Temperature -40°C to +70°C Features: Low insertion loss(â?¤ 0.20dB)and high return loss(â?¥ 35 dB) Free-floating ceramic ferrule UL-rated plastic housing and boot Boots in a variety of colors High precision alignment connector K=K carton package provides max protection on your items. Applications: Local Area Networks (LANs) and Wide Area Networks (WANs) Fiber Optic CATV, FTTH, FTTB, FTTP etc Fiber Optic telecommunication systems Transmission Mode (ATM) Fiber Optic Backbone Military Instrumentation
Single Window Singlemode Tree couplers (1310nm or 1550nm) are bi-directional high-port count units for splitting or combining optical signals over 1310nm or 1550nm wavelength windows. They are fused bionics tapered couplers cascaded in series to achieve the desired port configuration. These couplers are used to branch 1(2) input fibers into N (3, 4, 8,...16 ..) out put fibers with minimum loss.
Factory direct supplier optical fibre circulator pm fiber optic
The PMI is built based on PM collimator and Faraday isolator core with All-glass technique sealed process, which makes the isolator has very high stability and reliability.
The PBC/PBS is built based on PM collimator and Wollaston prism, with All-glass technique sealed.Process. lt can combine two polarization state into one single mode fiber or split single mode into.Two vertical polarization states.Mostly used in Raman Amplifier,combine two vertical polar states.To get a double power light
This product is used in free-space coupling in micro optics, used individually or in pairs. Multiple wavelengths (630-1550nm) are available. Power handling can be customized. Large-mode-area fiber is available. Working distance can be customized.
Depolarizer can change polarized light into natural light, and it can also reduce the influence of polarization on the system. It is widely used in polarization-maintaining sensing systems such as optical fiber sensors and optical fiber galvanometers. It has the characteristics of low polarization, low insertion loss and high return loss.
Product Description Colorful Lightning Micro USB Data Cable for Mobile Phone Products details: CategoryUSB Cable CertificatesCE RoHS FCC MaterialTPE ColorMix Color ConnectorLightning Micro LengthCustomized IC Chip With IC Chip PackingPE bag/blister/box FunctionData and charge sync Warranty12 months MOQ2000pcs -
Adss cable (all dielectric self-supporting aerial cable) is loose tube stranded. Fibres are positioned into loose tube made of high modulus plastics. The tubes are filled with a water-resistant around frp(fibre reinforced plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound, it is covered witha thin polyethylene (pe) inner sheath. After two layers of aramid yarns are applied in two directions over the inner sheath as strength member, the cable is completed with pe or at outer sheath. Wooden drum or carton, 3000m to 5000m/drum or as you required
