Adss cable (all dielectric self-supporting aerial cable) is loose tube stranded. Fibres are positioned into loose tube made of high modulus plastics. The tubes are filled with a water-resistant around frp(fibre reinforced plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound, it is covered witha thin polyethylene (pe) inner sheath. After two layers of aramid yarns are applied in two directions over the inner sheath as strength member, the cable is completed with pe or at outer sheath.
Wooden drum or carton, 3000m to 5000m/drum or as you required
Fiber Optic Cables
Quick information Brand name: feiniuplace of origin: chinamodel number : 014application : industrialconductor material : aluminuminsulation material : rubberjacket : pvctype : low voltage Description Fiber optic cable factory price outdoor cable manufacturer Adss cable also known as the whole medium self-supporting fiber optic cable, the whole medium that is used in the optical fiber is a full dielectric material, self-supporting fiber cable is to strengthen its own components to withstand weight and external load. The name of the cable on the use of this environment and its key technology: because it is self-supporting, so its mechanical strength plays a decisive role; the use of all-media material is because the cable is in a high-voltage strong electric environment, must be able to withstand strong electricity influence; because it is used in the power tower overhead, so there must be supporting the cable will be fixed on the tower. Adss cable has three key technologies: fiber optic cable mechanical design, the suspension point to determine and supporting the selection and installation.
Fiber Optic Patch Codes
Quick information Brand name: feiniuplace of origin: chinamodel number : 013application : industrialconductor material : copperinsulation material : rubberjacket : pvctype : high voltage Description Opgw cable fiber optic manufacturers per meter price Opgw is primarily used by the electric utility industry, placed in the secure topmost position of the transmission line where it shields the all-important conductors from lightning while providing a telecommunications path for internal as well as third party communications. Optical ground wire is a dual functioning cable, meaning it serves two purposes. It is designed to replace traditional static / shield / earth wires on overhead transmission lines with the added benefit of containing optical fibers which can be used for telecommunications purposes. Opgw must be capable of withstanding the mechanical stresses applied to overhead cables by environmental factors such as wind and ice. Opgw must also be capable of handling electrical faults on the transmission line by providing a path to ground without damaging the sensitive optical fibers inside the c able. Packaging & delive Packing :with wooden drum or as your requestdelivery lead time : 15 days -
Can be installed without shutting off the power Excellent AT performance ,The Maximum inductive at the operating point of AT sheath can reach 25 KV Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops Large Span lengths and the largest span is over 1000m Accurate control on Aramid application greatly improving the strength of cables Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and the temperature The design life span is over 30 years ADSS cable structure ADSS cable is the short form for All-dielectric Self-supporting Optical Cable. ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound. The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core. After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member, ADSS optical fiber cable is completed with PE or AT outer sheath.
Quick information Brand name: feiniuplace of origin: chinamodel number : 012application : industrialconductor material : copperinsulation material : xlpejacket : rubbertype : medium voltage Description Single mode ground wire opgw fiber optic cable Opgw is primarily used by the electric utility industry, placed in the secure topmost position of the transmission line where it , shields, the all-important conductors from lightning while providing a telecommunications path for internal as well as third party communications. Optical ground wire is a dual functioning cable, meaning it serves two purposes. It is designed to replace traditional static / shield / earth wires on overhead transmission lines with the added benefit of containing optical fibers which can be used for telecommunications purposes. Opgw must be capable of withstanding the mechanical stresses applied to overhead cables by environmental factors such as wind and ice. Opgw must also be capable of handling ele ctrical faults on the transmission line by providing a path to ground without damaging the sensitive optical fibers inside the cable.
OPGW cable is suitable for installation on new power lines with double function of ground wire and communication.It is the short form of Optical Fiber Composite Overhead Ground Wire. Especially for installation on normal voltage and extra high voltage power lines. OPGW cable can replace conventional ground wire of old power line with increasing fiber communication function. OPGW cable conduct short circuit current and provide lightning resistance. Central type description: The central stainless steel tube is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. are the most widely used cables ,their design is fully adapted to the most common electric line needs.
Gyfta53 fiber optic cable characteristics: fiber optical cable 1.Accurate fiber excess length ensures good mechanical and temperature performance Gyfta53 fiber optic cable brief introduction The fibers, either of single-mode or multi-mode type, are placed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of fiber reinforced plastic (frp) locates in the center of core as a non-metallic strength member. The tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An aluminum polyethylene laminate (apl) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin pe inner sheath. After the psp is longitudinally applied over the inner sheath, the cable is completed with a pe outer sheath. Gyfta53 fiber optic cable pictures: 1.Gyfta53-fiber-optic-cable Gyfta53 fiber optic cable fiber optical cable Gyfta53 fiber optic cable paramters: fiber optical cable Gyfta53 fiber optic cable Wooden drum // special package can be customized.Inspection certificate of fumigation should be notified before production as it will take 7 days from application to approval.
4/12/24/48core ADSS (All dielectric Self-supporting Aerial fiber optic cable . ADSS cable is loose tube stranded, 250um fibers are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT outer sheath.
