Automobile suspension shock mitigation system: including hydraulic engine mounting assemblies, transmission mounting assemblies, strut mounts, bushings, control arms, buffers, boots, and other automotive rubber-metal parts, etc.; steering system: including ball joint, tie rod ends, stabilizer link, rack end, axial joint, control arm (idler arm), and each kind of machine-finishing; and rubber items include: seal, gaskets, valve diaphragm, o-rings and other rubber products.
Spiral wound gasket Got-400 spiral wound gasket is accumulated, hovered and wound, and spot welded beginning and end terminal by v-shaped or w-shaped stainless steel and non metal filler, which has good compression elasticity, and is suitable for the sealing parts with temperature and pressure altering violently. It is a static sealing parts used for such flange connecting joints as pipeline, valve, bump, heat exchanger, tower, manhole, and hand hole, etc. It is widely applied in departments as petrochemical, mechanical, electric power, metallurgy, boat building, medical, atomic energy, and aerospace, etc. Ansi b 16.20mss sp-44api 605dinjisjpibs 1560jg/tgb/thgsh, etc.
Inner and outer ring of swg Got-400r metal flat gasket can also be processed into the inner and outer ring of the spiral wound gasket. We will punch the gasket that with the size smaller than 8fª by punching machine, and for the one that with large size by lathe. If for the expensive material as ss304, ss316, etc. As long as the sealing plane is not over wide, we will basically use the special ring rolling machine, process by the wire rod, to largely cut cost. The carbon steel outer ring can be coated with zn, white zn, or paint-drying, and the typing will be according to the standards or the demands. Product structure: The metal interface flat gasket, choose kinds of solid metal, mechanically cut and processed into kinds of metal sealing gaskets by high precision nc lathe, suitable for the sealing parts of pressure container, valve, cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high. Got-400r metal flat gasket can also be processed into the inner and outer ring of the spiral wound gasket. Got self design and manufacture the ring processing special equipment, outer ring trench cutter, and inner ring chamfering machine. Comparing with the traditional lathe, it is high efficient, low cost, and need no special fixture. Inventory product: Size: Asme b 16.20 1/2fª ~ 24fª 150lb, 300lb, 600lb, 900lb Other sizes or standards on require. Material: Carbon steel, zinc plating, or without zinc plating Ss304, ss304l, ss316, ss316l The following special material on require: Ss321, ss317l, duplex 31803, Ti, ni, inconel, monel, hastelloy, and zr, etc
Kammprofile gasket Got kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, ptfe, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type kammprofile gasket 410l kammprofile gasket with outer ring (integral type) 410lm kammprofile gasket with outer ring (split type) Model 410lm split type metal toothed gasket with outer ring, can choose richer metal, e.G. Carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410l, and the lining metal can be repeatedly used. Product application: Got toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25mpa Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; Ptfe, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Ring joint gasket Got-450 ring joint gasket chooses solid metal with kinds of materials, and is mechanically cut and processed into metal sealing gaskets with kinds of forms by high precision nc lathe. It is suitable for the sealing part of pressure container, valve, and cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high. Metal flat gasket Metal elliptic gasket Metal aniseed gasket Rx type metal gasket Bx type metal gasket Special-shaped metal gasket
Reinforced (non-)asbestos beater sheet Got-633 is made of 633-1 non-asbestos beater sheet inner lined with metal truss plate (generally the carbon steel with 0.2~0.25mm thickness). It is extensively applied in manufacturing various automobile and motor gaskets. It is an ideal material that will substitute the traditional asbestos gaskets. The product has excellent performance in self expansion, high resilience and long lifespan, etc. Mainly applied in automobile farming machine, motorcycle and engineering etc., it is also can be used in high strength gaskets and cylinder gaskets etc. Product structure: Got-633 truss plate reinforced asbestos beater sheet If stored for a long time, the asbestos will have certain corrosion to the inner lined metal.
Spiral wound gasket 1. Structure The wound style gasket consists of "v-shape"(or"w-shape")metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape, both its start point and end point are tack welded. 2.Performance and features 1. Wide range of applicable working condition, high temperature and high pressure resistance, applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium, through change of composition of gasket. 2.Strong stress compensation, stable and reliable sealing performance even under frequent pressure fluctuation condition. 3.Perfect sealing performance. 4.Normal requirement of flange surface finishing which contact with gasket. 5.Easy installation and low pre-tightening stress of gasket. 3.Kinds of gasket 1.A.Wound style gasket consists of four type:basic type, with inner ring, with outer ring, and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings. 2. Normally matrial used: A.Steel tape:08f, 0cr18ni9(304), 0cr18ni9ti, 1cr18ni9ti(321), 0cr17ni12, m02(316), 00cr17ni14m02(316l). B.(cold roll)steel plate for inner and outer ring:outer ring:mild steel, 0cr13 and 0cr18ni9 Inner ring:same as steel tape, special order is a available through negotiation. C.Nonmetal tape:flexible graphite, special made asbestos, teflon and non-asbestos paper. 4.Scope of application 1. Working temperature:-196íµ -700íµ(not higher than 600íµ in oxidic medium) 2.Working pressure:ín25mpa 3.Gasket coefficient:m=2.5-4 4.Min.Pre-tightening specific pressure:y-68mpa 5.Max.Machinable size:-2800mm
Die formed graphite ring Die formed graphite packing ring is made of pure flexible graphite , or graphite with nikle/ss316/brass wire reinforced. Performance and features Perfect self lubricant performance. High elasticity coefficiency. Scope of application Working temperature:~200~400íµ(200~800íµ under non-oxidation atmosphere) Working pressure:ín35mpa Density:1.4 ~ 1.6 g/cm3 Max.Machinable size:5~850mm
Ring joint metallic gasket Metal ring gasket is by smithing, heat treatment and mechanical processing. It is suitable for oil or gas pipe flange, pressure vessel, high speed joint face, valve with high temperature and high pressure. It has good sealing performance even when the pressure and temperature is not stable.The typical style r are divided into ellipse style and octagonal style according to its cross section. The standard style r gasket is made conform to the api 6a & asme b16, 20 standard, can bear 10000psi pressure at most. The octagonal style and ellipse style can be interchanged in flange with trapezum groove. Style rx is an improvement of style r in pressure resistant. It is a standard ring gasket suitable for all the flange sealing which is suitable for style r. Style by is another item with a high pressure resistant up to 15000psi. We have some different material and style which can correspond to different design and operation demand please see the following table for the reference of material characteristic. 56sheets/packing
Spiral wound gasket Spiral wound gasket is the best in the compression resilient in all the half-metal seal gasket, which is made by the metal hoop band and different kinds of packing material. We can make its structure density according to the demand of different locking force, and we use the inner and outer circle to control the maximum compact degree. So it can be well suit the rough flange face, especially suit the situation of unbalance load, loose of joint force, temperature and pressure change periodically , concussion and shock. It is used in flange joint of valve, pump, heat exchanger, tank, and handhole. It is widely used in the fields like petrochemical industry, machine, electric power, metallurgy, ship-building, medicine, atomic energe, space navigation. We made spiral wound gasket conform to different standards, for example, asmi, bs, jis, din and several other criterion used in china. 100x40x1mm
Spiral wound gasket is the best in the compression resilient in all the half-metal seal gasket, which is made by the metal hoop band and different kinds of packing material. We can make its structure density according to the demand of different locking force, and we use the inner and outer circle to control the maximum compact degree. So it can be well suit the rough flange face, especially suit the situation of unbalance load, loose of joint force, temperature and pressure change periodically , concussion and shock. It is used in flange joint of valve, pump, heat exchanger, tank, and handhole. It is widely used in the fields like petrochemical industry, machine, electric power, metallurgy, ship-building, medicine, atomic energe, space navigation. We made spiral wound gasket conform to different standards, for example, asmi, bs, jis, din and several other criterion used in china. 100x40x1mm
Non-asbestos joint sheet At1600 series---the products made of asbestos are rejected step-by-step when people demanding more and more on the health and environment-protection.Expandable teflon and flexible graphite are used much more widely than ever in modern industry. Although they are gradually replace the asbestos gasket, they cannot do it completely because they have some defect. So the non-asbestos sheet become the best replacement of asbestos planking. The non-asbestos sheet which is made of aramid fiber, inorganic fiber, synthetic rubber etc under high temperature and high pressure. The nonasbestos material is widely used in the joint part of tubing, valve, heat exchanger, pressure container in refinery, chemical plant, power plant, boatyard, pipework. 10000x1000x1mm/volume
Graphite Gasket is cut from pure graphite sheet or graphite sheet with metal reinforcement, features excellent corrosion-resistance, high-and-low temperature resistance, good compression resilient and high internsity it can be used as sealing elements of pipe, valve, pump, pressure vessel, heat exchanger and condenser, etc. Other complex gaskets such as water gauge gasket and flange gasket with bolt holes are available. Wrapped with metallic stripe in the inner and outer circle borderline. Keep the former excellent performances. Can be installed and disassembled conveniently without damage.It's widely used in flanges,valve bonnets,heat exchangers and level indicatiors etc.. Whatsapp:86-13566083951 Types: IG006-01 Flexible graphite gasket IG006-02 Reinforced graphite gasket with tanged steel IG006-03 Reinforced graphite gasket with flat steel
Manufactured from fiber, with oil-resistant rubber filler and compressed into sheets, these materials are suitable for use as an oil-resistant jointing medium for heat installations and engine sealing. This item is suitable for Services: Flange Gaskets Seals. Pipeline seals, Valve seals, Water, saturated steam, mild chemicals, refrigerants, oils, fuels, Gasoline etc.. Standard Size:1270mm x1270mm,1500x2000mm,1500x4000mm,1500x1500mm Thickness:0.4mm~6.4mm Whatsapp:86-13566083951 Color:White,Blue,Green,Black,Gray etc.. Style: IG-005-01 Low Pressure Compressed Non-asbestos Sheet IG-005-02 Middle Pressure Compressed Non-asbestos Sheet IG-005-03 High Pressure Compressed Non-asbestos Sheet IG-005-04 Oil-resistance Compressed Non-asbestos Sheet IG-005-05 Compressed Non-asbestos Sheet with SS304 wire insert IG-005-06 Reinforced Compressed Non-asbestos Sheet with Carbon Steel Tanged
Non-asbestos Gasketing Sheet is applied to the automobile,agricultural machinery,motorcycle,engineering machinery etc..the medium is the lubricating oil,the spacer material under150centigrade of suitable temperature. Whatsapp:86-13566083951 Standard Size:1000mmx1000mm,1000x1200mm,1000x500mm Thickness:0.5~2.0mm Color:Black,Grey,Green
100% PTFE resistant to all corrosive media. Soft,twistable and bendable, used continue their service and keep its best performance. Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured Advantages A wide range of applications for all type of flanges Gasket easy cut maked Higher temperature Multi-directionally expanded PTFE has exceptional mechanical strength Higher temp than other PTFE sheet Cost savings High quality - long life - reduce changing gasket period - cut cost Easy and simple to install gaskets, a used gasket changed easily Large sizes Offers some of the largest sheet sizes in the industry sizes from 1/2'' - 24'' available, welcom Custom gaskets
Ring joint gaskets are for oilfield and process industry duties. > oval shape gasket is belong to api 6a r series > these gaskets are used in pressures up to 10, 000 psi. > the oval type is the only gasket that will fit a bottom radiused groove. > gaskets and not re-used after torque. Customized is available
Kxt 600 spiral wound gasket is formed of v-shaped metallic strip and soft non-metallic filler. Support rings, inside and outside the spiral, improve the gasket's handing, fitting and versatility. Depend on its excellent compression resilience, it is suitable for sealing spots where the alteration of temperature and pressure are frequent. Typical applications * pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. * petrochemical, chemical, mechanical manufacturer, power station, metallurgy, shipbuilding, medical and pharmaceutical unclear power station and navigation, etc. Specifications & materials * products are manufactured in accordance with all relevant gasket standards to suit flange designations: asme b 16.20, asme b 16.5, bs1560, asme b 16.47 a (b), bs en 1092, din, jis, and nf, etc. * color cord as asme b 16.20 on request. * provide complete range of materials spiral wound gaskets, combining the performance of the materials. Including monel 400/ inconel 600, 625, 800, 825/ hastelloy b3/ hastelloy c276/ titanium, etc. Range of fillers: graphite, ptfe, non-asbestos, mica, etc.
Flexible graphite compound gasket is die-cut from pure graphite plate or reinforced graphite compound plate. With its excellent resistance to corrosion and high & low temperature, fine elastic resilience and strong strength, It is a sealing element used for pipes, valves, pumps, pressure vessels, heat exchangers, condensers, etc. It can also be cut into some complex shapes, like water level gasket with bolt hole flange Advantages: Excellent sealing performance Self-lubricating Ideal for use with chemicals Thermal stability Non-fragility Corrosion resistance Application Flange surface sealing of pipeline Chemical manufacturing industries Valve and pump Pressure containers Heat exchanger
Gasket, seal product.