Highlights Supports 5G NR(NSA&SA), LTE and WCDMA, 3GPP Rel.15 complied WiFi 6: 2 x 2 MU-MIMO, up to 1200Mbps 5G Downlink/Uplink up to 3Gbps/250Mbps. LTE Cat 20 Downlink/Uplink up to 2Gbps/150Mbps. 5000mAh Removable Battery 2.4-inch Color Touchscreen Display Support one RJ45 Ethernet port Cellular Protocol 3GPP Rel.15, NSA&SA, Sub-6G and LTE Category 20 Chipset Qualcomm SDX55 Frequency 5G:n1/3/5/7/8/20/28/38/40/41/77/78/79 4G: B1/3/5/7/8/18/19/20/26/28/32/34/38/39/40/41/42 3G: B1/3/5/6/8/19 Up to 5X Carrier Aggregation Throughput 5G: Downlink/Uplink up to 3Gbps/250Mbps 4G: Downlink/Uplink up to 2Gbps/150Mbps 3G: Downlink/Uplink up to 42Mbps/5.76Mbps Antenna Internal, 4 x 4 MIMO WiFi Protocol WiFi6, 802.11b/g/n/ac/ax, Frequency Dual-Band, 2.4GHz and 5GHz Max Users 64 Throughput 802.11n: Up tp 300Mbps 802.11ac: Up tp 400Mbps 802.11ax: Up tp 1200Mbps Antenna Internal, 2 x 2 MIMO WiFi SSID Broadcasting/Hide Security: WEP / WPA-PSK / WPA2-PSK, MAC Filter Software Management WEB GUI Network Configuration APN Management / Network Selection / Statistics Security Firewall, VPN Passthrough, DMZ, Port Forwarding, Port Filter, NAT SMS SMS Send/Receive Address DHCP Server, IPv4/IPv6 Dual Stack Environmental Dimension 137mm x 85mm x 23.5mm Weight 400g Battery Removable Lithium-ion, 5000mAh, 6-hour continuous use Display 2.4-inch Color Touchscreen Display Button Power, Reset Interface 1 x USB Port(Type-C) 1 x RJ45 1 x SIM Card Slot(4FF) Temperature -10 -- 50 Humidity 5%-95%, non-condensing
LTE Category 16, 3GPP Release 12 Max DL/UL Rate: LTE-FDD: 900Mbps/150Mbps LTE-TDD: 700Mbps/50Mbps Antenna: Internal and Omni-Directional Up to 5 APNs Multi Bands Combination: DL up to 3CA, 256QAM; UL 2CA, 64QAM DL 4x4 MIMO Band Width FDD: 5MHz, 10MHz, 15MHz, 20MHz TDD: 10MHz, 15MHz, 20MHz Transmission Mode FDD: TM2, TM3, TM4 TDD: TM2, TM3, TM4, TM7, TM8, TM9 Frequency Bands LTE FDD: Band 1/3/7/20/28 LTE TDD: Band 38/40/41/42/43 DL 2x2 MIMO: Band 20/28 DL 4x4 MIMO: Band 1/3/7/38/40/41/42/43 Antenna Antenna Gain:700 MHz - 960 MHz: 1 - 2dBi 1710 MHz - 2690 MHz: 6 - 7dBi 3400 MHz - 3800 MHz: 8 - 9dBi Impedance:50 CA Combinations DL 2CA: 1+1, 1+3, 1+7, 1+20, 1+28, 3+1, 3+3, 3+7, 3+20, 3+28, 7+1, 7+3, 7+7, 7+20, 7+28, 20+1, 20+3, 20+7, 28+3, 28+7 38+38, 40+40, 40+42, 41+41, 41+42, 42+40, 42+42, 43+43 DL 3CA: 1+3+7, 1+3+20, 1+7+20, 3+1+7, 3+1+20, 3+3+1, 3+3+8, 3+3+20, 3+7+20, 7+1+3, 7+1+20, 7+3+20, 20+1+3, 20+1+7, 20+3+7, 28+3+3, 40+40+40, 40+42+42, 41+41+41, 41+41+42, 42+42+42 UL 2CA: 3+3, 7+7, 38+38, 40+40, 41+41, 42+42 Receiver Sensitivity Band 1: 100 dBm@5 MHz, 97 dBm@10 MHz, 95.2 dBm@15 MHz, 94 dBm@20 MHz Band 3: 97 dBm@5 MHz, 94 dBm@10 MHz, 92.2 dBm@15 MHz, and 91 dBm@20 MHz Band 7: 98 dBm@5 MHz, 95 dBm@10 MHz, 93.2 dBm@15 MHz, 92 dBm@20 MHz Band 20: 97 dBm@5 MHz, 94 dBm@10 MHz, 91.2 dBm@15 MHz, and 90 dBm@20 MHz Band 28: 98.5 dBm@5 MHz, 95.5 dBm@10 MHz, 93.7 dBm@15 MHz, and 91 dBm@20 MHz Band 38: 97 dBm@10 MHz, 95.2 dBm@15 MHz, and 94 dBm@20 MHz Band 40: 97 dBm@10 MHz, 95.2 dBm@15 MHz, and 94 dBm@20 MHz Band 41: 95 dBm@10MHz, -93.2 dBm@15MHz,-92 dBm@20 MHz Band 42: 96 dBm@10MHz, -94.2 dBm@15MHz,-93 dBm@20 MHz Band 43: 96 dBm@10MHz, -94.2 dBm@15MHz,-93 dBm@20 MHz Interface 1 x GE PoE LAN 1 x SIM Card Slot(3FF, micro-SIM card) 1 x LED Indicator for Power, System and LTE Signal Strength 1 x Reset Button Built-in Omni-Directional LTE Antennas Certification CE, RoHS, REACH, WEEE Router Functions DHCP Server NAT, DMZ VPN Passthrough IPv4, IPv6, IPv4/v6 Static Route, Policy Route IP Passthrough Firewall URL/Domain Filtering MAC/IP/Port Filtering System log Management: Web, SNMP, TR069 Environmental Size: 125 mm x 240 mm Net Weight: 1450g Power Supply: Non-Standard PoE Ingress Protection: IP65 ESD Protection: Contact±8KV Air±10KV Operation Range: -40 to 55 Humidity: 10%-95%, non-condensing Installation: Pole-Mounted, Wall-Mount
A Cellular Eth Router. It supports 2*100Mbps Ethernet interfaces, 1*RS232/RS485 serial port, LTE network access with Dual SIM slots for the failover, designed for the industrial. The configurable serial port transmits the narrow-band data from the machine, and the Modbus feature supports RTU converts to TCP easily. Hardware Specifications: 2* 10/100Mbps Ethernet ports 2* SIM card slot (backup/failover) 2* 4G antenna 1* FUNC button 1* GPS antenna(optional) 1* 3 standard core power interface 4G/3G/2G access The frequency bands could be customized Dimension: 179mm*135mm*34mm Structure design: the high-duty metal case Power consumption: 24W Input: DC12V/1.5A Operating temperature: -40+85C Operating humidity: 1095%RH Store temperature: -40+85C Installation: desktop, wall-mounted, slideway Key features: Various network protocols: TCP/IP, UDP, HTTP, TELNET, ICMP, DHCP, PPPoE, DNS etc. Port setting: Port Mirroring, Flow Statistics, LAN and WAN Port Setting Multi-WAN Function LTE+SFP Fiber+Ethernet Load Balancing WAN Load Balancing: Bandwidth Occupancy, WAN IP Tracing WAN Bandwidth Percentage Display LAN IP Statistics Detecting Online: ICMP Detecting, ICMP Detecting Static routing and dynamic routing of RIP/OSPF/BGP PWE3, VPLS, L3 VPN QoS: packets priority, traffic policing, traffic shaping,rate-limiting Centralized network management of CLI, WEB and SNMP NAT function ACL function Firewall, packet filtering etc VPN functions: GRE, L2TP VPN, IPSec VPN, EOIP VPN, MPLS VPN etc. (VPN optional, GRE over IPSec, IPsec over L2TP.) 802.1Q VLAN and QinQ Link detective functions such as BFD, DLDP(switch to backup link according to detective result quickly) Log function
G/EPON ONU 1*10/100/1000M and 1*10/100M Ethernet interface with 2.4GHz WIFI
The Dual Sim card Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
High-performance industrial-grade cellular router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network Stable connection.
Android 4K network advertising digital signage media player Dual Band WiFi, Gigabit LAN used as signage player too Highlight: *Rockchips RK3288 Quad core *GPU: Mali-T764 3D GPU (OpenGL ES 1.1/2.0 /3.0,and OpenCL 1.1) *Android 7.1 OS *2G RAM,8G/16G ROM high capacity memory *With WIFI 802.1b/g/n AC Wireless to get rid of the wire bond *Connectors: HD, AV out,Optical,RJ45,MicroSD card slot, USB hostx2 *Build in Blue tooth *Support the latest HTML5,Flash11, etc. *Support external 3G USB Dongle *There are more than 600,000 Google Play apps and games for a great experience *Extension ports support 2.4GHz wireless mouse, wireless keyboard with touchpad, etc, while a micro-SD slot lets you add more storage memory up to 32GB
4G Industrial Router R10 Prove high speed wireless data access internet,support 1LAN,WIFI,and RS485 or RS232 serial port.suitable for IIOT applications. The R10 is an industrial 4G LTE/3G cellular routers and IoT gateways, featuring Ethernet/wireless/Wi-Fi connectivity, VPN security, high reliability, it supports RS232/RS485 to 4G Lte data transmission and WIFI 802.11 b/g/n. It is certified on major carriers networks, ideal for smart grid, industrial automation, remote monitoring, transportation and IoT/M2M applications. 4G Industrial router R10 is an industrial IoT high-speed router, compatible with 4G/3.5G/3G/2.5G network, flagship configuration, VPN link, industrial protection, wide temperature, wide voltage design, easy to set up high speed, stable The wireless transmission network uses the public LTE network to provide users with wireless long-distance data transmission.
4G Industrial Router (2SIMCards 3LAN 1WAN 1 RS485 1RS232 4AIN 2DIN 2DO) This router is an industrial IoT high-speed router, compatible with 4G/3.5G/3G/2.5G network, flagship�configuration, VPN link, industrial protection, wide temperature, wide voltage design, easy to set up high speed, stable, The wireless transmission network uses the public LTE network to provide users with wireless long-distance data transmission. The 4G router adopts high-performance industrial-grade 32-bit communication processor and industrial-grade wireless module, with embedded real-time operating system as software support platform, and provides one RS232 or RS485, 3 LAN, 1 WAN and WIFI interface, which can be connected at the same time. Serial devices, Ethernet devices, and WIFI devices implement transparent data transmission and routing. 1.Support hundreds of 3G/4G wireless modules, plug and play; 2.Intelligent anti-drop line, support online detection, online maintenance, automatic redial of dropped calls, ensuring that the device is always online; 3.Cloud remote background management, ad push, remote upgrade and remote configuration; 4.Local network PHP browsing and remote synchronization of local storage content; 5.Support serial port TCP/UDP transparent data transmission or AT command transmission; 6.SMS control route online and offline, short-term notification of routing status; 7.Support VPN security tunneling, including PPTP, L2TP; 8.Complete and robust router function, support multiple Internet access methods: automatic allocation, specified IP, PPPoE; 9.Support ARP, DDNS, DHCP, DNS , HTTP,HTTPS, ICMP, PPP, PPPoE, SMTP, SNTP, SSL,TCP/IP, Telnet, UDP protocols; 10.Support serial port local TFTP, web software upgrade. Contact :kp07@iot-solution.com www.iot-solution.com skype:samchinese Tel�? +86-755 29451836 Mobile�?+86 135 7081 0254
APPLICATIONS: Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge. CAT5e and CAT5 compatible IEEE 802.3afï¼?803.1at 10/100 Base-T Ethernet protection LAN, FDDI, CDDI, ATM,WLAN PDH, SDH, SPDH Industrial control Industrial POE, With High reliability and high stability Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system.
Specifications PCBA Name L02HA1 TDD-LTE: / FDD-LTE: 1,3,8,18,19 TD-SCDMA: / UMTS: 1,8 EDGE/GPRS: / WAN RF Capability LTE Chipset Marvell 1802 cat4 LTE Channel Bandwidth 1.4/3/5/10/15/20 MHz Modulation Downlink QPSK/16-QAM/64-QAM Uplink QPSK/16-QAM LTE Authentication EPS-AKA Adaptive Modulation and Coding Supported MIMO support MIMO 2x2 Idle Mode Supported Sleep Mode Supported Idle Mode Signaling Reduction (ISR) Supported Power Level TDD-LTE Power Class 3ï¼?23 +/-3dBmï¼? FDD LTE Power Class 3ï¼?23 +/-3dBmï¼? TD-SCDMA Power Class 2ï¼?24 +1/-5dBmï¼? UMTS Power Class 3ï¼?23 +/-2dBmï¼? EDGE Power Class E2ï¼?GSM850/900:33dBm;DCS/PCS:30dBmï¼? GPRS Power Class E2ï¼?GSM850/900:27dBm;DCS/PCS:26dBmï¼? Sensitivity TDD LTE -94 dBm(20MHZ) FDD LTE -93 dBm(20MHZ) TD-SCDMA -108 dBm UMTS -106 dBm EDGE GSM850/900:-98dBm;DCS/PCS:-98dBm GPRS GSM850/900:-101dBm;DCS/PCS:-99dBm Data Rate TDD-LTE 3GPP R9 ,Category 4, DL 150Mbps UL 50Mbps FDD-LTE 3GPP R9 ,Category 4, DL 150Mbps UL 50Mbps TD-SCDMA 3GPP R7 DL 2.8Mbps UL 2.2Mbps UMTS 3GPP R7 DL 21.6Mbps UL 5.76Mbps EDGE/GPRS EGPRS Class12 DL 237kbps UL 118Kbps GPRS Class12 DL 85.6kbps UL 42.8kbps LAN WIFI info WLAN Mode: 802.11b/g/n Frequency Band: 2.4GHz WLAN Channel supported:1-13 Antenna Type: Internal Supported Security: WEP64 WEP128 WPA-PSK WPA2-PSK WIFI MIMO: 1x1 Data Rate WIFI IEEE 802.11b 11/5.5 Mbps WIFI IEEE 802.11g 54/48/36/24/18/12/9/6 Mbps WIFI IEEE 802.11n 72.2/65/58.5/52/39/26/19.5/13/6.5 Mbpsï¼? System 2G/3G/4G setup Network Selection: Manual, Auto Setup by user Interoperability: TDD-LTE & TD-SCDMAï¼?TD-SCDMA & GSM, TDD-LTE & UMTS, FDD-LTE & TD-SCDMA, FDD-LTE $ UMTS, UMTS & GSM SMS: SMS over SGs Func at LTE SMS's receiving and reading APN setup: APN setup and revise PIN Func: PIN:Save, revise, lock,unlock DM: DM(Now support CMCC DM) Modem Func: Connect to PC by USB Automatically connect reconstructed: Can automatically reconnect to network after off-network in data using WIFI setup Protocol: Max users 10 DHCP client / server, you can set whether to activate the DHCP service assigns IP addresses starting and ending addresses, set the gateway address; Support client list: Displays all the DHCP server to obtain IP address of the host, including MAC address, IP address obtained Support terminal IP address, SSID, communication channel, security type, the administrator account and password factory setting Support SSID and channel settings: Set SSID, communication channel (frequency band WiFi settings, select the range of WiFi support of the band all the available channels), WIFI function on/off, and the SSID broadcast on/off Provides WEP, WPA-PSK, WPA2-PSK, WAPI encryption methods, etc.
The T01 is a leading edge 3G PTT device powered by Android OS and 4000 mAh rechargeable battery. With 3G (WCDMA: 900/1900/2100) network, it supports faster speed, better voice quality and integration of existing PTT applications like Zello, REAL PTT, PocStar, etc. T01 is an irreplaceable tool for customers valuing the convenience and productivity of being able to set up individual or group calls with the push of a button and instantly communicate over the speaker of the recipient's handset.
00G data rate Support line rates from 103.125 Gbps to 111.81 Gbps Up to 300m based on MMF ,40km on SMF Digital Diagnostics Monitoring Interface Duplex LC optical receptacle No external reference clock Electrically hot-pluggable Compliant with QSFP28 MSA with LC connector Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH
40G data rate with 4 CWDM lanes Mux/Demux design Up to 11.1Gbps Data rate per wavelength From 150m to 40km transmission on MMF/SMF Electrically hot-pluggable Digital Diagnostics Monitoring Interface Compliant with QSFP+ MSA with LC connector Case operating temperature range:0°C to 70°C Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH
YN-Q418 is a high-end dual-band 802.11AC Wave-2 wireless Gigabit enterprise router developed by YINUO-LINK. Built-in Qualcomm Enterprise IPQ series CPU, flash memory and high-speed memory, with powerful data processing capabilities. At the same time, it has the functions of Firewall, QoS and VPN, providing reliable all-round number and network security, supporting 200 people to access the network, helping to solve the efficient operation of the enterprise; Supporting the MeiG 4G modem, easy access to efficient and stable network. Suitable for offices, large conference rooms and other open spaces.
YN-AR41AP-A2 is industrial DIN rail 4G wireless router , wireless support 802.11N, max up to 300Mbps, can be customized according to customer requirements, YN-AR41AP-A2 is based on industrial-grade application of high-performance wireless router. Use the world-leading Atheros solution, the CPU is clocked at 550MHz, wireless supports 802.11N, and it is perfectly compatible with third-party firmware such as OpenWrt to meet customer secondary development. It is also a high-performance 4G wireless router YN-AR41AP-A2 which is completely an industry universal router. Supports wireless, mobile receiver distance is in 50-150M, can wear 2-3 walls. Complies with IEEE 802.11n, IEEE 802.11g/b, and IEEE 802.3/3u standards Wireless transmission rate up to 300M 1 WAN port, 4 Fast LAN ports, all support auto-negotiation and port auto-flip Transmit power up to 27dBm (max) with SKYWORKS and two SE2576 The power network port SIM card holder are with static and surge protection Supports hard watchdog design Support WDS wireless bridging, easy expansion of wireless networks Supports broadband access methods such as PPPoE, dynamic IP, and static IP Automatic dialing, on-demand dialing, scheduled dialing, to meet a variety of dialing requirements Supports SSID broadcast control and MAC address-based access control list Provides 64/128/152-bit WEP encryption and supports WPA/WPA-PSK and WPA2/WPA2-PSK security mechanisms Built-in firewall, support for IP, MAC, URL filtering, can flexibly control access to the Internet and access time Built-in DHCP server can automatically and dynamically assign IP addresses All Chinese/English configuration interface, support free software upgrade Adopting the world-leading Atheros solution, the CPU is clocked at 550MHz, wireless supports 802.11N, and is perfectly compatible with third-party firmware such as OPENWRT to meet customers' secondary development Support Open-Wrt
General Specifications of DVB-T2 terrestrial receiver 1.chipset MSD7T01 2.No Data Sheet, No Internet, No Fee watching TV 3.HDMI/MPEG-4/H.264 4.One USB 2.0 &HDMI output& WiFi antenna 5.PVR,view JPEG 6.support Multi-lingual DVB-T2/DVB-T compatible, supports MHEG5 Supported play USB documents,such as:Video,Music and picture Through AV & HDMI port connect TV Supported various kinds smart end device(Phone,Table PC,Apple Computer,Television,USB Disk) No Data Sheet, No Internet, No Fee Compatible with 576i/576p/720p/1,080i/1080P video formats Fully compliant with DVB-T2 standard Supports HDMI 1.3 (1080P) Auto and manually scan all available TV and radio channels Connectivity: RF input/output, HDMI output, USB port, WIFI antenna
Personal case mini dvb-s2 satellite receiver dvb s2 set top box with 7 days EPG and USB PVR support IKS Product Features: * Plus USB wifi ,support IKS(CC CAM and New Cam) * Dual High performance Ali CPU up to 600MHZ * Fully comply with DVB-S2 and MPEG-2/4 standard * PAL & NTSC auto switch * USB 2.0,media player for DIVX, AVI, MKV, MP3, MP4, JPEG etc. * PVR, schedule recording * Mutli-languages OSD * Resolution at 576I/P, 720I/P,1080I,1080P * Auto/manual channel search * Favourite channel edit * CVBS,YUV,Coaxial,R&L,HDMI *Advance Automatic and blind scan * Subtitle,Teletext * 7 days EPG * Time shift function * Support BISS function(optional)
General Specifications of DVB-T2 terrestrial receiver 1.chipset MSD7T01 and Maxliner 608 2.HDMI/MPEG-4/H.264 3.One USB 2.0 &HDMI 4.PVR,view JPEG 5.support Multi-lingual DVB-T2 with Mstar 7T01 and Maxliner 608 solution Compatible with 576i/576p/720p/1,080i/1080P video formats Aspect ratio: 4:3/4:3LB/4:3PS/16:9/16:9LB/16:9PS Auto and manually scan all available TV and radio channels Auto/manual program search, multi-language supported Supports MPEG-1, MPEG-2, MPEG-4 and H.264 decoder (up to 1,920 x 1,080 pixels) Advanced audio processor supporting Digital and Digital Plus (optional) USB2.0 host support upgrade, PVR, time shifting and media play with U-Flash or HDD Supports HDMI output, scart output, coaxial, RF in and output,USB,RCA Frequency Range: VHF 174~230MHZ, UHF 470~862MHZ Decoder format:MPEG-1(Layer I/II),MPEG-2 Layer II,AAC Supported Bandwidth :6/7/8 MHZ Demodulation Scheme:QPSK/16QAM/64QAM/256QAM
Specifications: Main chipset: NOVERTEK or Mstar 7805 Key Selling Features: Full HD ISDB-T Receiver USB Media player Easy to use and attractive menu 1. Fully SD/HD ISDB-T compliant,support full HD 1080p 2.Support SD/HD MPEG2 and MPEG4 AVC H.264 3.Auto and manually scan all available TV and radio channels 4.Powerful and highly effective 7-day EPG function 5.Multi-language menu,subtitle and audio output supported,support closed caption(CC) 6.USB 2.0 for PVR,Scheduled PVR,TIMESHIFT,software upgrade and media files playback 7.Support aspect ratio 16:9, 4:3,Pan&Scan,letter box. 8.Support parental local and FAV function 9.Easy to use and attractive menu 10.Support various media files playback as below: Music: MP3,WMA,WAV,AAC Photo: JPEG,BMP,PNG Video: MKV,AVI,XVID,MOV,VOB,FLV,DAT,MPEG,MPG,MP4,TS Tuner and Demodulation parameter: RF input frequency: 13-62 Ch(470mHzï½?806mHz) Bandwith: 6MHz Demodulation: QPSK,16QAM,64QAM or DQPSK Code Rate:1/ 2, 2/3, 3/4, 5/6,7/8 Automatic Guard: 1/4, 1/8, 1/16, 1/32 FFT Mode: 2K, 4K, 8K
