Rimmca stf 20 is a fast, hand-set floor-slab formwork system which is made up of several basic components. You can form every slab thickness, every layout and every height with rim stf 20. The system allows for large spans, and this reduces the number of parts that have to be moved. Rim stf 20 thus represents efficient working in any type of requirement.
High load-bearing capacity
Large spans reduce the number of parts, it can be optimised for all slab thicknesses and geometries through the selection of the girders and girder combinations
Cost-efficient
Depending on the prop type, fewer girders and props, the economic choice due to cost-efficient components that can be used again and again
Adaptable
Adaptable to any layout and floor extension thanks to the overlapping of the girders, it owns perfect adaptability to walls and columns.
Freely selectable
Plywood and props can be chosen depending on demands and requirements
Rimmca professional technical team and perfect after-sales service is committed to give you the best experience
Rimmca table formwork ttf 20 adapts to any slab type. It is perfect for projects in building construction with high demands for finishing quality, safety and efficiency.
Perfect adaptability
Greatest stability and load capacity guarantee rim ttf 20 can meet all geometry of the structure, it can also be used as cantilevered edge with bracing
Lower labour cost
Rim ttf 20 is easy and practical to set up and can be shifted and adapted very quickly.This makes them a cost-effective and efficient way of carrying out large-area slab projects
Convenient
Fast moving from floor to floor in horizontal position with transportation trolley and comfortable transportation with fork in vertical direction
Rimmca professional technical team and perfect after-sales service is committed to give you the best experience
Rimmca climbing formwork cb180 & cb240 provides safe working conditions with wall formwork at all heights. The well thought-out design combines easy handling with a fast moving procedure and problem-free adjustment to suit different building shapes.It's extremely easy to set up , and can be tailored to meet a wide range of different requirements.
Strong
High loading capacity of the brackets allows the formation of large scaffold units
Flexibility and time-saving
It is a cranelift climbing formwork for structures of any shape and inclination.By turning pressure, spindles, the climbing formwork cb240 & cb180 can be perfectly accommodated to structures whose inclination varies from one-cycle to next.
Safe
Wide work-platforms with plenty of space for fast, safe working
Completely free of tripping hazards in front of and behind the formwork because of the wind bracing
80 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
Adaptbility
Rimmca wall formwork vtf 120 adapts to various kinds of projects asking for different thickness , height & shapes of walls, like power plant, tower and apartment etc.
Safety
Rimmca not only provides you well-made products but also optimized and individualized solutions, avoiding the trouble back at home.
Cost-economical
Rim vtf 120 is a simple and efficient formwork system which most of the members can be re-use recycles.Short forming times and large optimized units can save your labour and time.
"single side formwork ssf " enable the concrete forces to be safely transferred. Its max pouring height can be up to 8.0m high.
Advantages
1.Tensile forces are reliably transferred by means of diagonal anchors.
2.Modular vertical stacking facility. Optimum adaptability to the required pourheight¡, from 4.00 m up to max. 8.0 m
3.Adapts to uneven ground by means of spindles with articulated footplates
4.Adjusting for the different fresh-concrete pressures required is easy and economical¡§csimply increase or decrease the spacing between the supporting frames, as appropriate
5.The high-speed repositioning can be by crane or by traveling unit on rails or rollers.
Scaffolding pipe in hot dip galvanized and black
Outer diameter 48.3mm/60.3mm or others
Thickness 4mm, 3.2mm, 3.0mm or others
Lengther: 6m, 21'or others
Conform to bs 1387/en39 standard
04. Pressed double coupler (fixed clamp/fixed coupler), bs 1139 standard / en 74
05. Pressed swivel coupler (swivel clamp/swivel coupler) bs 1139 standard / en 74
06. Pressed putlog coupler, bs 1139 standard / en 74
07. Drop forged fixed girder coupler, bs 1139 standard / en 74
08. Drop forged swivel girder coupler, bs 1139 standard / en 74
09. Sleeve coupler, bs 1139 standard / en 74
10. Base plate, size 150 x 150 mm
11. Metal plank dengan ukuran panjang 2 sampai 4 meter, lebar 25 cm, tinggi 4 cm, tebal 1, 2 mm, ss 280 standard
12. Drop forged double coupler, bs 1139 standard / en 74
13. Drop forged swivel coupler, bs 1139 standard / en 74
14. Inner joint pin
15. Stair thread coupler
16. Putlog head
17. Oyster coupler
18. Board retaining coupler
19. Ladder clamp
20. Roofing coupler
21. Toe end clip
22. Supa tie coupler ii
23. Locking pin
24. Fencing coupler
25. C-clamp fixed coupler
26. C-clamp swivel couple
Ringlock scaffolding ladder bracket
1.System scaffolding ladder bracket is 17?/430mm wide,or 14",with forged half coupler assembled,compatible with cuplock and ringlock system scaffolding and ladders of 3',5',10'
2.The bended sheet is 50mm wide,6mm thick
3.M12 nut and bolt and Grade 8.8
4.Surface finish:hot dip galvanized,painted,etc.
5.Package:steel pallet
6.The size of the ladder bracket can also be produced as customized
7.High quality and fast delivery
8.3',5',10' steel ladders and other system scaffolding components are well supplied,too
9.Usually two ladder brackets are needed to fix the ladder and the scaffolding tubes.
Right Angle Wedge Clamp
1.Made of high tensile strength steel bar Fusion Welding increased the strength Wedge lock is easy to use 2.Hot dip galvanized for long service life.
3.Connecting two tubes at right angles.
4.A coupler in which the clamping force on the tubes is provided by tightening the flaps aroundthe tube and by menans of hammering home a wedge.
5.We can carve any marks, if you need.
Drop forged scaffolding double coupler British type
Drop forged double coupler British type,which is widely used in global market to connect 48.3mm tubes at 90 degrees.
Unit weight: 0.97kg
Customized marks can be made
Surface finish: electro galvanized,or hot dip galvanized
Meeting EN74 and BS1139 Standard
Packing: 25pcs in one bag,50 bags are packed on one wood or steel pallet
Rich experience in producing all types of scaffolding couplers,pressed type and drop forged type.We have our own forging line
Fast delivery
