New design, most advanced machine in china. Unique features: 1.Whole body alloys line 2.Twin screw extruder + single screw extruder -- much lower cost maintenance (old type is two single screw extruders). Because the modular construction of twin screw extruder. 3.High output. Specifications Xps board production line Excellent insulation Twin screw extruder High output Plastic processed:xps Certificate iso9001 Output 260-330kg/h or 340-480kg/h Gpps, 158k Foaming agent: f22+f142b, f152a, co2+ethanol Model: xps hky75/150 extrusion line Foaming agent: co2 Thickness: 20-60mm Width: 600mm, 900mm, 1200mm Density: 32-42kg/m3 Capacity: 250-320m3/24h Model: xps hky75/150 extrusion line Foaming agent: hcfc Thickness: 20-100mm Width: 600mm, 900mm, 1200mm Density: 30-36kg/m3 Capacity: >350m3/24h We offer: customer plant review, purchasing suggestion, technical sevice and traning. Main structure: 1.Feeding system 2.Hopper 3.Primary extruder (hky75) 4.Metering pump 5.Secondary extruder (s150) 6.Heat exchanger 7.Temperature controller 8.Static mixer 9.Slot die 10.Board calibrator 11.Halu-off system 12.Cooling roller 13.Cutting system 14.Control cabinet 0
It is a new model for installation and maintenance of highway anti-collision guardrail post and beam newly developed according to usersf+ needs. (the equipment has obtained the national patent, no.: zl 01 263422.0). The functions of this product are the same as njj series truck-mounted pile drivers. It adopts independent diesel engine as its driving force. The driving speed is 40-60 km/h. The equipment integrates pile driving and pile extracting, with 240fp rotating device. The equipment does not need turn the direction during driving and drawing the guardrail post on both sides. The equipment can operate independently when separated with the chassis, can adjust the hydraulic driving directions. It is equipped with brake device which is safe and reliable in operation. Main technical specifications Type of hydraulic hammer Tdb180 Tdb230 Size (lf+wf+h) Mm 4200f+1800 f+2800 4200f+1800 f+2800 Engine power Kw 16.2 20 Radius of gyration Mm 2100 2100 Lateral distance Mm 860 860 Highest working height Mm 4680 4680 Working pressure Mpa 16 16 Pile extracting force Kn 78.4 96.5 Impact frequency Hz 5.8-13 10-15 Working height of hydraulic hammer Mm 700-3000 700-3000 Speed Km/h 40-60 40-60. Export adn sea-worthy standard special packaging.
It is a new product developed by us. The product claims good mobility, low oil consumption and reliable brake system. The cab can hold 5 persons, with air conditioning device and can carry installing and repairing materials such as guardrail posts and beams of around 2.5 ton. The chassis of the truck mounted pile driver is isuzu brand vehiclef+s chassis. Special mounted equipment is national patented product, the patent no. Is zl 01 263422.0. The special hydraulic equipment has appropriative tools, which can do pile driving and pile extracting for guardrail post easily, with turning around of 240fp, so that it is unnecessary to turn the direction of the truck-mounted pile driver when driving and drawing the posts on both sides. With the characters of easy operation, convenient repairing and good reliability, the product can greatly reduce the working strength, improve the installing and maintenance quality and speed, thus being the best product for installation and maintenance of highway guardrail post and beam. The product has been widely applied to the dozens of highway in the country; all these products are quite welcomed by users. Main technical specifications Item Unit Njj5071tqx Njj5072tqx Type of chassis Nkr77lllwcjay Nkr77lllwcjay Weight Kg 4300 4350 Max. Weight Kg 6500 6550 Max. Load Kg 2200 2200 Person capacity Person 5 5 Size (lf+wf+h) Mm 6250f+1880f+2850 6250f+1880f+2850 Max. Speed Km/h 95 95 Rated power Kw 96 96 Rotating speed R/min. 2999 2999 Working pressure Mpa 16 16 Pile extracting force Kn 78.4 96.5 Working height of hydraulic hammer Mm 700-3000 700-3000.
The product is mainly applied to repair the crashed and wave shape guardrail beam of highway through 6/7/8/9/10 rollers and accessorial equipment to carry out the reshaping and recovery of guardrail beam of highway, avoid the crook or twist of guardrail beam, thus enabling them to be reused. This is the most perfect equipment in the world with stabilizing performance, easy operation, economical and high efficiency. Main technical specifications Rectifying speedtheoretical speed: 3-5m/min. Roller diameter++80 mm Roller quantity6/7/8/9/10 Rated power30 kw Rated revolving speed132-1320 r/min. G.W.5000 kg Size of working platform450f+500f+4000 mm 450f+500f+2000 mm Working circumstanceheight above the sea levelfn1500m Temperature of circumstance:-20f+f++45f+ Relative humidityfn98%. Export and sea-worthy standard wooden case.
Turbochargers, construction machinery and parts.
Construction materials, heavy duty truck, construction machine.Exports
Rimmca stf 20 is a fast, hand-set floor-slab formwork system which is made up of several basic components. You can form every slab thickness, every layout and every height with rim stf 20. The system allows for large spans, and this reduces the number of parts that have to be moved. Rim stf 20 thus represents efficient working in any type of requirement. High load-bearing capacity Large spans reduce the number of parts, it can be optimised for all slab thicknesses and geometries through the selection of the girders and girder combinations Cost-efficient Depending on the prop type, fewer girders and props, the economic choice due to cost-efficient components that can be used again and again Adaptable Adaptable to any layout and floor extension thanks to the overlapping of the girders, it owns perfect adaptability to walls and columns. Freely selectable Plywood and props can be chosen depending on demands and requirements Rimmca professional technical team and perfect after-sales service is committed to give you the best experience
Rimmca table formwork ttf 20 adapts to any slab type. It is perfect for projects in building construction with high demands for finishing quality, safety and efficiency. Perfect adaptability Greatest stability and load capacity guarantee rim ttf 20 can meet all geometry of the structure, it can also be used as cantilevered edge with bracing Lower labour cost Rim ttf 20 is easy and practical to set up and can be shifted and adapted very quickly.This makes them a cost-effective and efficient way of carrying out large-area slab projects Convenient Fast moving from floor to floor in horizontal position with transportation trolley and comfortable transportation with fork in vertical direction Rimmca professional technical team and perfect after-sales service is committed to give you the best experience
Rimmca climbing formwork cb180 & cb240 provides safe working conditions with wall formwork at all heights. The well thought-out design combines easy handling with a fast moving procedure and problem-free adjustment to suit different building shapes.It's extremely easy to set up , and can be tailored to meet a wide range of different requirements. Strong High loading capacity of the brackets allows the formation of large scaffold units Flexibility and time-saving It is a cranelift climbing formwork for structures of any shape and inclination.By turning pressure, spindles, the climbing formwork cb240 & cb180 can be perfectly accommodated to structures whose inclination varies from one-cycle to next. Safe Wide work-platforms with plenty of space for fast, safe working Completely free of tripping hazards in front of and behind the formwork because of the wind bracing
Adaptbility Rimmca wall formwork vtf 120 adapts to various kinds of projects asking for different thickness , height & shapes of walls, like power plant, tower and apartment etc. Safety Rimmca not only provides you well-made products but also optimized and individualized solutions, avoiding the trouble back at home. Cost-economical Rim vtf 120 is a simple and efficient formwork system which most of the members can be re-use recycles.Short forming times and large optimized units can save your labour and time.
"single side formwork ssf " enable the concrete forces to be safely transferred. Its max pouring height can be up to 8.0m high. Advantages 1.Tensile forces are reliably transferred by means of diagonal anchors. 2.Modular vertical stacking facility. Optimum adaptability to the required pourheight¡, from 4.00 m up to max. 8.0 m 3.Adapts to uneven ground by means of spindles with articulated footplates 4.Adjusting for the different fresh-concrete pressures required is easy and economical¡§csimply increase or decrease the spacing between the supporting frames, as appropriate 5.The high-speed repositioning can be by crane or by traveling unit on rails or rollers.
Scaffolding pipe in hot dip galvanized and black Outer diameter 48.3mm/60.3mm or others Thickness 4mm, 3.2mm, 3.0mm or others Lengther: 6m, 21'or others Conform to bs 1387/en39 standard 61 pcs per bundle/ 37 pcs per bundle
04. Pressed double coupler (fixed clamp/fixed coupler), bs 1139 standard / en 74 05. Pressed swivel coupler (swivel clamp/swivel coupler) bs 1139 standard / en 74 06. Pressed putlog coupler, bs 1139 standard / en 74 07. Drop forged fixed girder coupler, bs 1139 standard / en 74 08. Drop forged swivel girder coupler, bs 1139 standard / en 74 09. Sleeve coupler, bs 1139 standard / en 74 10. Base plate, size 150 x 150 mm 11. Metal plank dengan ukuran panjang 2 sampai 4 meter, lebar 25 cm, tinggi 4 cm, tebal 1, 2 mm, ss 280 standard 12. Drop forged double coupler, bs 1139 standard / en 74 13. Drop forged swivel coupler, bs 1139 standard / en 74 14. Inner joint pin 15. Stair thread coupler 16. Putlog head 17. Oyster coupler 18. Board retaining coupler 19. Ladder clamp 20. Roofing coupler 21. Toe end clip 22. Supa tie coupler ii 23. Locking pin 24. Fencing coupler 25. C-clamp fixed coupler 26. C-clamp swivel couple Steel pallets
Steel prop in light duty, middle duty, heavy duty 60.3mm, 56mm outer tube, 1.6mm -4mm thickness 48.3mm inner tube, 2.0-4.0mm thickness Steel pallets, woodern pallets, bundles
H20 beam using in formwork Carton box
Top manufacturer of steel plank in china, 1 rivet& side cover 2 flats& flared holes 3 hooks (hangar bracket) 4 lengths&mater Sizes immediate available 295*90*20*15*1.8/1.5 us style 228.6*63.5*20.5*14.5*1.6 230*60*25*10*1.8 australia style 240*45*15*15*1.0 228*63.5*25*12.7*2 210*45*20*15*1.2 european styles.
Scaffolding coupler Iso9001;2000 uk en74
Product Specifications 1. Material: Q235 2. Size: 48.3*4mm 3. Length: 500mm, 1000mm, 1500mm, 2000mm, 2500mm, 3000mm, 4000mm 4. Surface treatment: HDG/Galvanized/Painted 5. Standard: EN74 bags and steel pallet or as client's requirement
Ringlock scaffolding ladder bracket 1.System scaffolding ladder bracket is 17?/430mm wide,or 14",with forged half coupler assembled,compatible with cuplock and ringlock system scaffolding and ladders of 3',5',10' 2.The bended sheet is 50mm wide,6mm thick 3.M12 nut and bolt and Grade 8.8 4.Surface finish:hot dip galvanized,painted,etc. 5.Package:steel pallet 6.The size of the ladder bracket can also be produced as customized 7.High quality and fast delivery 8.3',5',10' steel ladders and other system scaffolding components are well supplied,too 9.Usually two ladder brackets are needed to fix the ladder and the scaffolding tubes.
Right Angle Wedge Clamp 1.Made of high tensile strength steel bar Fusion Welding increased the strength Wedge lock is easy to use 2.Hot dip galvanized for long service life. 3.Connecting two tubes at right angles. 4.A coupler in which the clamping force on the tubes is provided by tightening the flaps aroundthe tube and by menans of hammering home a wedge. 5.We can carve any marks, if you need.
