SMS request remote capture the spot: Use the SMS command ask "E9" to capture the local and send MMS back. 300000 pixel camera• SMS request remote capture the spot: Use the SMS command ask "E9" to capture the local and send MMS back.• 300000 pixel camera: Special camera, clear pictures be showed on the mobile phone.• Image storage: With 2G SD card, can record 100000 pictures maximum.• Infrared night-vision: Can support the shoot at the darkest condition.
1.1 x relay outputs DC12V 2.with External camera, Support motion detecting which can capture thief's photo. Support motion detecting which can capture thief's photo. 3.4 wired zones and 40 wireless zones. 4.Can program open/closed alarm of digital inputs. 5.Working frequency between detector and alarm host(315M/433M optional) 6.Digital inputs are adopted cal-coupled isolators, which can prevent external high voltage from destroying internal. 7.Set 5 phone numbers by digital keypad. 8.arm/disarm by control keyboard on the mainframe & phone & SMS & Remote controller. 9.SMS of each zone content can be edited independently(English or other language:140 characters) 11.Call 5 phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. 12.record function: Maximum recording time:1 minute 13.voice function:support play the user record voice. 14.support Mic and interphone. 15.Prompt for whole operation guidance, automatic prompt for host status and alarm by SMS 16.Modify zone inquire status of alarm host by SMS demand. 17.with magnetic Antenna with strong signal 18.Low or High alert levels programmable by user 19.with standby rechargeable battery. The host automatically stores system status, while its power is off. 20.Adopts wireless signal transmission, no need to connect to wire and easy for installation. 21.tamper device: Arming while the control panel removing or shaking. 22.Connect with alarm Centre through GSM network.
1.Support GSM frequency 850/900/1800/1900 MHz,Working frequency between detector and alarm host(315M/433M optional) 315/433 Mhz optional. 2.4 wired guarding zones for connecting wired sensors, 1 x relay outputs, Can control home appliances remotely through the relay output;50 Wireless guarding zones; 3.SMS 5 phones automatically while alarming 4.Call 5 phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. 5.Digital inputs are adopted opti cal-coupled isolators, which can prevent external high voltage from destroying internal. 6.arm/disarm and program the system by phone & SMS 7.record function: Maximum recording time:1 minute 8.tamper device: Arming while the control panel removing or shaking. 9.with standby rechargeable battery. The host automatically stores system status, while its power is off. Technical parameters: 1.Wireless distance :100-200m(without obstacles) 2.Alarm response time=8S(GSM in normality) 3.Working conditions Operating temperature: -45~+60? Humidity: =95% 4.standby current:5mA 5.standby power:< 0.3W 6.Standby battery working hours=48hours 7. Dimension: 188mm(Long)×120mm(Wide)×28mm(High) Gross weight: 1.5Kg Net weight: 0.5Kg Application: It widely applied in workstation/Shops/super market/Community management/government entity/bank/security company/Local police station and so on for cable telephone network to protection can't get to the place. Them can protect the safety of user and take care of property.
1. GSM frequency: 850/1900 MHz or 900/1800/MHz( optional) 2. Power adpater: AC input 220V/110V 50Hz/60Hz DC output 15V/2A 3. Standby power consumption: 0.9W 4. Isolation compression: 2500VDC (Leakage 1mA, 1minute) 5. Temperature acquisition channel: —10—+60°C 6. Usage range of temperature transimitter: —55—+150°C 7. Direct current input channel: 0-20mA 8. Overall dimensions: 290(L)*270(W)* 85(H) mm 9. Weight: 1.2kg
1.1 x relay outputs DC12V 2.with External camera, Support motion detecting which can capture thief's photo. Support motion detecting which can capture thief's photo. 3.4 wired zones and 40 wireless zones. 4.Can program open/closed alarm of digital inputs. 5.Working frequency between detector and alarm host(315M/433M optional) 6.Digital inputs are adopted cal-coupled isolators, which can prevent external high voltage from destroying internal. 7.Set 5 phone numbers by digital keypad. 8.arm/disarm by control keyboard on the mainframe & phone & SMS & Remote controller. 9.SMS of each zone content can be edited independently(English or other language:140 characters) 11.Call 5 phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. 12.record function: Maximum recording time:1 minute 13.voice function:support play the user record voice. 14.support Mic and interphone. 15.Prompt for whole operation guidance, automatic prompt for host status and alarm by SMS 16.Modify zone inquire status of alarm host by SMS demand. 17.with magnetic Antenna with strong signal 18.Low or High alert levels programmable by user 19.with standby rechargeable battery. The host automatically stores system status, while its power is off. 20.Adopts wireless signal transmission, no need to connect to wire and easy for installation. 21.tamper device: Arming while the control panel removing or shaking. 22.Connect with alarm Centre through GSM network.
Operating voltage : DC 9-35V Standby current : 55uA Alarm current: 35mA at DC12V 60mA at DC24V Alarm indication: Red LED ON Detecting area:60 square meter(with 4 meter height) 100PCS/CNT G.W: 24KG N.W: 18KG Carton size: 56.5X46X31.5cm 2 wired portable outdoor smoke detector tester motion sensor alarm
Product description: 1.With 2 wired zones for connecting wired sensors, dry contact and wet contact (optional). 88 wireless zones. 2.Support rfid card to door access. 3.Can connect to 8 groups of wireless intelligent home appliances. 4.Support ios & android app to remote control. 5.Support 6 kinds of voice and languages (chinese, english, russian, spanish, germany, french) 6.Sms 5 phones automatically while alarming and driving alarm. 7.Call 5 phones automatically while alarming and driving alarm, can hear the emergency alarm voice clearly. 8.Auto-dial 1 preset phone numbers of alarm center 9.Sms alert & auto-dial alert when ac power outage, ac power recovered. 10.With standby rechargeable battery. The host automatically stores system status, while its power is off. 11.With wired mic interface, switching the silence and siren. 12.Talkback function: can speak with field person. 13.Alarm panel tft screen and full touch keypad, internal clock, signal shows, easy to operate. 14.Support 6 arm/disarm methods: sms , phone, panel screen, app, remote controller , center software. 15.Built-in high standard internal antenna with strong signal. 16.Temperature and humidity display screen 17.3 group of timing arm/disarm 18.Can save 300 latest alarming record. 19.Record function: maximum recording time:5s. 20.Voice function:support play the user record voice. 21.Can modify the host code and defense zone content via sms. 22.Real-time arm/disarm and timing arm/disarm function is optional. Dimension: 188mm¡¨¢120mm¡¨¢28mm Gross weight: 1.5kg
Solar system , solar road stud , solar garden light and other road safety products.Solar system , solar road stud , solar garden light and other road safety products
Fiber Perimeter Intrusion Detection Systems PIDS, or Perimeter Intrusion Detection System, is an effective solution designed to detect unauthorized access or intrusion attempts at the physical boundaries of a facility, such as a building, industrial site, military installation or other sensitive area. Protect and secure your premises before intruders enter the property by installing security sensors in the perimeter area. Benefits of PIDS 1. Detect intruders early in an intrusion The perimeter is the first point of entry to the site. By detecting intruders at the perimeter, it is possible to respond as early as possible before the intruder reaches the building. 2. Improve security quality and reduce human error Many sites have perimeter security with only security guards or security personnel and surveillance cameras (CCTV). It is difficult for security personnel, especially those responsible for large premises, to see everything without overlooking emergencies and always responding immediately. There is also the possibility of human error. And monitoring often becomes lax when security guards are working shifts. Security sensors reduce human error, such as neglect, and work 24/7 to maintain the same quality of security. 3. Improve security efficiency and take immediate action in case of intrusion By dividing the perimeter into zones and installing security sensors in each zone, it is possible to identify where intrusions are occurring. In addition, by integrating the security sensors with the surveillance camera system, when the sensors detect an intrusion, they will trigger the linked cameras to perform actions such as real-time pop-up or PTZ camera control on the screen in the surveillance room. On-site security personnel can then act quickly by dispatching security guards for on-site inspection, alarming the police/owner or issuing voice warnings remotely. It realizes operational efficiency for reliable response in emergency situations. 4. Long-term fixed cost savings Increasing security costs year after year is a problem for which a solution must be found. Hybrid security using the PIDS solution can reduce long-term security fixed costs by replacing some of the security guards with alarm systems (security sensors).
Radiation Detectors A radiation detector is a device that measures nuclear, electromagnetic, or optical radiation. Nuclear radiation detectors identify nuclear radiation by measuring the emission of ionizing radiation of alpha particles, beta particles, and gamma rays. A nuclear radiation detector, also known as a Geiger counter, consists of two main components: the processing electronics and the Geiger tube. Geiger tubes are filled with low-pressure inert gases such as helium, argon, or neon. If radioactive radiation occurs, the noble gases become ionized. An anode inside a Geiger tube records the number of ionized particles that is numerically related to the intensity of radioactive radiation. The radioactivity measurements are then displayed on the LCD screen of a Geiger counter or nuclear radiation detector. Measuring nuclear radioactivity and classifying nuclear radioactivity values is very important. For example, terrestrial gamma radiation is typically measured at 0.03 - 0.3 �µSv/h (microsieverts per hour). This "normal" range of oscillations is determined by naturally occurring radioactive elements in the ground, such as uranium and potassium. To calculate this factor, cosmic radiation must be taken into account. For example, taking cosmic radiation into account, the maximum radioactivity content at the Schneefernerhaus, Germany's highest environmental research station, is equal to approximately 110 �µSv/h. At PCE Instruments you will find three types of Geiger counters or nuclear radiation detection equipment to help you measure radioactivity: 1) alpha radiometers, 2) meters for detecting alpha, beta and gamma radioactivity, and 3) wearable Radioactive meter on the body.
Supply UAV jamming accessories Jamming module-unit price is between US$50-1200, excluding international shipping costs. Jamming antenna-unit price is between US$25-80, excluding international shipping costs.
Golf Course Perimeter Protection System Golf course security teams need to protect the course from theft, vandalism and intruder threats. Protecting a golf course can be a complex issue because of the size of the golf course; it is difficult to monitor the entire area all the time. Another challenge in protecting a golf course is that the power supply does not reach every point on the perimeter, which forces limitations on the types of security measures that can be taken. Most golf clubs protect the main building and entry points; however, due to the large size of the golf course, intruders can enter through any number of entry points. The Raycom golf course perimeter protection system is an outdoor ground security system that can be integrated with any existing security system, burglar alarm or CCTV system. Raycom's ground sensor technology consists of 4 or 8 sensing units (geophones) and analyzers. Raycom stand-alone buried seismic detectors are installed underground and are capable of recognizing footsteps and vehicle movement. The system is designed to pick up only safety-related vibrations; it does not sense earthquakes. Raycom golf course perimeter protection system is a perimeter ground system that is resistant to extreme environmental conditions such as weather and temperature changes, and can operate in a variety of terrains undisturbed by vegetation or strong winds. In contrast to other technologies such as leaky coaxial RF, Raycom seismic detectors can work on any ground without preparation or any special conditions. The system has been developed to the highest standards and does not require any maintenance to operate.
Perimeter Detection Systems Raycom utilizes Perimeter Intrusion Detection Systems (PIDS) to ensure organizations are completely secure and help reduce operational risk. As threat levels continue to increase, it is becoming critical for organizations to properly protect their assets. This starts at the perimeter of their sites, and there has never been a more important time to deploy a robust, reliable and secure detection strategy to reduce operational risk. Timely and highly accurate location information about potential intruders ensures a quick and appropriate response to minimize damage. Ensure that your perimeter intrusion detection system is fully integrated into your security solution, providing real-time data. Thus creating the ability to track and respond to intruders. Fiber optic technology is fast becoming the technology of choice. Especially for organizations looking to deploy a cost-effective, reliable solution and significantly reduce the entire lifecycle cost of ownership. Raycom's family of advanced fiber-optic intrusion detection solutions provides covert buried and fenced or wall-mounted detection through a single detection unit. With fully scalable systems for sites ranging from less than 5 kilometers to more than 100 kilometers, Raycom has a solution for you. Resistant to cable cuts and vandalism All Raycom PIDS detection units are available in 1-channel or 2-channel models. 2-channel models will continue to provide uninterrupted detection along the perimeter. This is true even if the cable is cut or damaged. Lower cost of ownership Overall lower installation and maintenance costs compared to alternative technologies. In addition, no power supply is required on site. Minimize nuisance alarms Utilizing artificial intelligence technology, our market-leading detection algorithms are able to develop acoustic fingerprints of different events. This allows differentiation between genuine security risks and irrelevant ambient noise Multiple fence types Due to its unique configuration capabilities, the Raycom solution is suitable for every fence type without compromising location accuracy or event categorization capabilities. Positioning accuracy Advanced signal processing technology combined with intelligent algorithms can quickly and accurately identify the exact location of a potential threat within �±5m. Integration Our advanced software seamlessly integrates with a wide range of commonly used third-party systems. This provides operations teams with real-time information from a range of devices through a single interface. Covert Buried Detection Our buried solutions are fully covert and can detect people and vehicles long before they enter the site, ideal where there is a lack of physical boundaries.
A rockbreaker is a machine designed to manipulate large rocks, including reducing large rocks into smaller rocks. They are typically used in the mining industry to remove oversize rocks that are too large or too hard to be reduced in size by a crusher. Rockbreakers consist of two major components, a hydraulic hammer (used to break rocks) and a boom (the arm). There are two major types of rock breakers, mobile and stationary - typically placed on a pedestal or slew frame.
A rockbreaker is a machine designed to manipulate large rocks, including reducing large rocks into smaller rocks. They are typically used in the mining industry to remove oversize rocks that are too large or too hard to be reduced in size by a crusher. Rockbreakers consist of two major components, a hydraulic hammer (used to break rocks) and a boom (the arm). There are two major types of rock breakers, mobile and stationary - typically placed on a pedestal or slew frame.
Perimeter Intrusion Detection System The RF900 is a Dual-zone perimeter intrusion detection system designed to detect intrusions into the perimeters and borders on the basis of the principle of M-Z laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system.The device has only one defense area and is available without external communication network. The project construction is convenient, no network transmission cable is required, the equipment can be managed and monitored remotely, with built-in battery. When the equipment is powered off, it can indicate the power off alarm, and ensure the normal operation of the equipment to achieve 24-hour uninterrupted protection. Furthermore, it has strong anti-disturb ability to eliminate environment nuisance alarms and can be immune to electromagnetic interference, lightning and storms. The RF900 perimeter intrusion detection system provides both indoor and outdoor deployment, supports 1-2 defense zones; it is suitable for villas, residential, oil depots and other short-distance or less complex perimeter protection. Features Zone length is up to 500m. One zone and two zones are optional. Optical fiber length is up to 1000m. Use normal optical fiber cable for telecommunications (GYXTW). Fiber optics can be installed on wire net or underground. Support contact closure alarm output. Detect behaviors of climbing, cutting, sabotage and disassembling. Support rapid fiber cutting detection (less than 1 second). Be immune to electromagnetic interference, lightning damage. ESD and surge protection circuits inside. Ambient working temperature: -40 ~ +70 Adopt ABS engineering plastics. DC12V power supply with consumption less than 3W. Application RF900 Dual-zone GPRS intrusion detection system You can find more information on our web, so please take a look.
Compacts down for convenient transportationAdjustable grill height, alter cooking height by adjusting hook length Telescopic design, opens and packs easily super easy to setup
Coupling ATD330H 5402650177 for main drum ZJ30 Digital pressure gauge 3802300230 43011001010-Bearing 32148 Explosionproof Signalling Hooter dGH21 for Zone 1+21 EX 13-C-16-325PN Receptacle O-RING 5" FOR FIG 1002 HAMMER UNIONS 712100 GH3101-02.00Crankshaft assembly BEARING-B601,TIMKEN 3877/3820 REF 54-24 FOR GILL 600 TTC-3AR4 Dry Type Transformer Temperature Controller YHT100A explosion-proof camera SF40-IP/SAF40-IP Safe Area IP Fixed Camera Stations DMDP-A GEG V-Belt of Cooling Fan BANDORPF-5920 17X2300LI RETNG RING,INT, PN.M11-1006-010 Throttle controller5100150196 Adjusting screw (left) for hydraulic wrench ZQ 203/100 ZQ203-243 376 Fitting Hyd Tee 6 MJIC X 6 FJIC-Run X 6 MJIC SF40-Ti Safe Area Thermal Imaging Fixed Camera Stations Sleeve connector A6II-1500 Cross-head pin SBW 2D3.545.04-01 Cover 107.35.110.06 Lanshou LS cross pin GH3161-04.13G Intermediate gear for hydraulic tong TQ340/35YA TQ340-169 Air cylinder AK7535010200 BOMCO GH3101-28.04Valve Body YHW220-IR explosion-proof integrated infrared high-definition camera key 12V.06.21 Sealing gasket GH3161-04.14G Release spring 416751-01 Actuator for Feeding Bin & Homo Silo Outlet Valves DKJ 3100-250NM 4-20 mA 220V Camera Station PT9 Cover ASK 3P105149.001 3P105149 SPM TWS-600S pump Application: pump Bolt PERKIN1817956C1 Break out air cylinder VL/O-3-1/2 9983 W202 FESTO Clutch 713104-00-0100 for right angle Reducer ZJ-20 HANDLE 10 POSITION SANITARY 10" 22322003 AZ7O2156-010100 Cooling water inlet/retura pipes Ring LGF3081-04.06G Loadmaster Two position three way directional control valve Rexroth 4900350107 Harting connector9330062616 7103-002.25 J-type oil seal 120X150S 56519-8-6-S Elbow 9037 O-Ring For TDS Hydraulic Jack FRICTION HUB ASSEMBLY AF50001-02.08.21.00 Piston ring 120157674 Valve 109858-1AN NOV For: 6XL200MT Sealing ring AN33001-04.06A GH3101-05.27.00Valve rod guide Brake shoe complete with fasteners for tape �?17.66.1 HUMMEL circular plug connector 7520643010 ct. No 3301011330 motor 1MA6134-6BB66-Z3.02.03.03.002 YHZ-B6 mounting bracket GH3101-06.31Nut:15/16-16UN-2B Support ring P1100330AA mast lift cylinder for XJ-450S Module 3301018520 Drill pipe tongs ZQ203-100II Vibrating screen box DERRICK-2000 250 mesh HDF-2
Product Description LT-T36 Main Specification: -Made of high strength steel, and the European production of hydraulic, control, parts; -Pipeline all the built-in, to avoid the sun and rain or foreign objects tangled; -Shape lightweight, low pressure rubber tracks on the ground, can travel, work on any ground; -Outrigger separately controlled to bypass obstacles in a limited space work; -Reliable torque control to ensure that the vehicle will not roll; -Wired remote control walks, working bucket with 220V outlet; -Small size, compact and flexible; Compact design for indoor and outdoor use. Can drive in most tender and rigid ground. Height and width of chassis with crawlers is adjustable 100m radio remote control for perfect and easy operation. Low ground pressure due to optimal weight dispersal. HMI LCD display, double CPU for redundant control. Dual power sources: electric mains and diesel engine 220V outlet Emergency lowering. Cables and hoes inside boom. jib and basket 180�°rotation Automatic leveling, Outriggers wide/narrow postioning.
Fog Formula 2 PCS fog formula in one container Fog Container Quantity 2 PCS fog container,1 time ejection Refill Easily replaced and refilled Fog Made Formula Solid food-grade Protection Area 80m3 closed area Fog Generator Cold smoke technology Time of Duration 30-45 minutes Startup Mode Support button switch,Remote controller,Remote monitoring center Power Source DC12V,3A Startup Time 1 second Full of Fog Time 5 seconds Power consumption 18w Dimensions 168*101mm Color Silver,grey,black Weight 1.7kg Casing Aluminium Working Temperature -10°C~50°C Operating Humidity -10%~85% Installation Bracket Wall Mounting Why Choose Us: Global-First solid dry fog with food-grade,cold smoke technology,environmently friendly,no any harmless to humans and animal;it will not affect clothing,furnishings and electrical equipment surrounding. Fog formula container easing replaced and refilled. Non-corrosive,non-residue,and biodegradable,ultra-low power consumption. Protects property at least 45 minutes after intrusion. Support multiple startup modes,seamless integration with existing electronic alarm systems. Easy to install,maintenance free. Passed the toxicology test of the PLA(People's Liberation Army) institute of disease prevention and control,and passed the product quality test of the ministry of public security safety. Aplication: 2PCS fog container,1 time use,which can fill 80m3 area in 5-8 seconds. 1 second spray dense fog. 3 seconds protect key area. 5-8 seconds completely filled with 80m3. Our security fog system are installed for customers as network alarm operation business:jewelry stores,luxury stores,chain stores,supermarket,server rooms,bank,ATM's. It will reduce on-site visibility to zero and actively prevent burglary/robbery in seconds in case of emergency.
