Golf Course Perimeter Protection System
Golf course security teams need to protect the course from theft, vandalism and intruder threats. Protecting a golf course can be a complex issue because of the size of the golf course; it is difficult to monitor the entire area all the time. Another challenge in protecting a golf course is that the power supply does not reach every point on the perimeter, which forces limitations on the types of security measures that can be taken. Most golf clubs protect the main building and entry points; however, due to the large size of the golf course, intruders can enter through any number of entry points.
The Raycom golf course perimeter protection system is an outdoor ground security system that can be integrated with any existing security system, burglar alarm or CCTV system.
Raycom's ground sensor technology consists of 4 or 8 sensing units (geophones) and analyzers.
Raycom stand-alone buried seismic detectors are installed underground and are capable of recognizing footsteps and vehicle movement. The system is designed to pick up only safety-related vibrations; it does not sense earthquakes.
Raycom golf course perimeter protection system is a perimeter ground system that is resistant to extreme environmental conditions such as weather and temperature changes, and can operate in a variety of terrains undisturbed by vegetation or strong winds.
In contrast to other technologies such as leaky coaxial RF, Raycom seismic detectors can work on any ground without preparation or any special conditions. The system has been developed to the highest standards and does not require any maintenance to operate.
Supplier: Industrial safety (ppe), height safety, fire detection & protection system, gas detection system and building management system (bms) product.
RP-2001 is a UL listed six-zone fire alarm control panel for single and dual hazard deluge and preaction applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing.! Features & Benefits: 1. Designed for sprinkler standards NFPA 13, 15 and 16. 2. Dual hazard operation. 3. Cross-zone (double-interlock) capability. 4. Six programmable Style B (Class B) IDCs (Initiating Device Circuit). 5. Optional Digital Alarm Communicators
RP-2002 is a UL listed six-zone fire alarm control panel for single and dual hazard agent releasing applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing. Features & Benefits: Disable/Enable control per input zone and output zone. Extensive transient protection. Dual hazard operation Meets International Building Code (IBC) seismic requirements
The Notifier NBG-12 Series Pull Station is a fire alarm initiation device that allows manual activation of the fire alarm system. It typically consists of a red or yellow manual-pull handle or lever, which when activated, sends a signal to the fire alarm control panel to initiate an alarm. The NBG-12 series is designed for use in fire alarm systems and is commonly used in commercial, industrial, and residential buildings. The product is known for its durability and reliability, and it meets industry standards for fire alarm systems.
Perimeter Detection Systems Raycom utilizes Perimeter Intrusion Detection Systems (PIDS) to ensure organizations are completely secure and help reduce operational risk. As threat levels continue to increase, it is becoming critical for organizations to properly protect their assets. This starts at the perimeter of their sites, and there has never been a more important time to deploy a robust, reliable and secure detection strategy to reduce operational risk. Timely and highly accurate location information about potential intruders ensures a quick and appropriate response to minimize damage. Ensure that your perimeter intrusion detection system is fully integrated into your security solution, providing real-time data. Thus creating the ability to track and respond to intruders. Fiber optic technology is fast becoming the technology of choice. Especially for organizations looking to deploy a cost-effective, reliable solution and significantly reduce the entire lifecycle cost of ownership. Raycom's family of advanced fiber-optic intrusion detection solutions provides covert buried and fenced or wall-mounted detection through a single detection unit. With fully scalable systems for sites ranging from less than 5 kilometers to more than 100 kilometers, Raycom has a solution for you. Resistant to cable cuts and vandalism All Raycom PIDS detection units are available in 1-channel or 2-channel models. 2-channel models will continue to provide uninterrupted detection along the perimeter. This is true even if the cable is cut or damaged. Lower cost of ownership Overall lower installation and maintenance costs compared to alternative technologies. In addition, no power supply is required on site. Minimize nuisance alarms Utilizing artificial intelligence technology, our market-leading detection algorithms are able to develop acoustic fingerprints of different events. This allows differentiation between genuine security risks and irrelevant ambient noise Multiple fence types Due to its unique configuration capabilities, the Raycom solution is suitable for every fence type without compromising location accuracy or event categorization capabilities. Positioning accuracy Advanced signal processing technology combined with intelligent algorithms can quickly and accurately identify the exact location of a potential threat within �±5m. Integration Our advanced software seamlessly integrates with a wide range of commonly used third-party systems. This provides operations teams with real-time information from a range of devices through a single interface. Covert Buried Detection Our buried solutions are fully covert and can detect people and vehicles long before they enter the site, ideal where there is a lack of physical boundaries.
Perimeter Intrusion Detection System The RF900 is a Dual-zone perimeter intrusion detection system designed to detect intrusions into the perimeters and borders on the basis of the principle of M-Z laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system.The device has only one defense area and is available without external communication network. The project construction is convenient, no network transmission cable is required, the equipment can be managed and monitored remotely, with built-in battery. When the equipment is powered off, it can indicate the power off alarm, and ensure the normal operation of the equipment to achieve 24-hour uninterrupted protection. Furthermore, it has strong anti-disturb ability to eliminate environment nuisance alarms and can be immune to electromagnetic interference, lightning and storms. The RF900 perimeter intrusion detection system provides both indoor and outdoor deployment, supports 1-2 defense zones; it is suitable for villas, residential, oil depots and other short-distance or less complex perimeter protection. Features Zone length is up to 500m. One zone and two zones are optional. Optical fiber length is up to 1000m. Use normal optical fiber cable for telecommunications (GYXTW). Fiber optics can be installed on wire net or underground. Support contact closure alarm output. Detect behaviors of climbing, cutting, sabotage and disassembling. Support rapid fiber cutting detection (less than 1 second). Be immune to electromagnetic interference, lightning damage. ESD and surge protection circuits inside. Ambient working temperature: -40 ~ +70 Adopt ABS engineering plastics. DC12V power supply with consumption less than 3W. Application RF900 Dual-zone GPRS intrusion detection system You can find more information on our web, so please take a look.
Supplier: Fire alarm equipments, fire fighting equipments
Services: Security systems, safety systems
Supplier: Automotive / bio degreaser and cleaners / industrial and safety equipment / custom apparel and accessories / ppe
dell corning is the largest automotive interior protective products manufacturer in the americas, and a major extrusion/converter of oriented shrink film and specialty products. we are a top tier supplier of automotive, medical, engineered packaging, and consumer products. we provide multinational and north american companies with solutions tailored to their perspective markets, valued by its customers for innovation, quality, responsiveness and reliability.
Services: We can manufacture, produce and provide all logistics if required.
Buyer: