Product Name: China Producer WSD Propolis Powder
Ingredients: Pure bee propolis and Silicon Dioxide
Appearance: Brown to brown yellow powder (Relate to Purity)
Certification: GMP, HACCP,FDA,KOSHER
YJ-H7100 Automatic Hematology Analyzer is mainly designed to detect the parameters of the series of red blood cells and hemoglobin,platelet and leukocyte in the blood.It is a requisite vitro diagnostic equipment which is applied to quantitative analysis of blood cells in clinical and laboratory.
Biological Diagnostics Medical Blood Hematology Analyzer (YJ-H7100)
Features
1. Easy to operate
2. Carry-over protection by automatic probe interior and exterior washing
3. Both whole blood and prediluted blood test modes are available
1ã??Can be worn by all kinds of clinical personnel during operation, covering the user's mouth, nose and forehead, to prevent the Infiltration of pathogens, microbial
particles, etc.
Made of three-layer nonwovens, belt and nose clip by mechanical pressing.
Disposable use only, no reuse.
Term of validity: 48 months.
HT1012JW DR system consists of one set of industrial DR panel detector and one set DR software .HT1012JW wireless Portable Digital Radiographic system is a real industry DR system for NDT . HATATEST HT1012JW DR equipment flat panel detector is with the advanced , friendly,powerful, intelligent DR software. HATATEST HT1012JW NDT Flat panel detector is produced based on ISO 17636 specification
The Feature of HT1012JW Digital Detector Array (DDA) are:
Scintillator: Gd2O2S : Tb
Active Area:260 x 325 mm
Active Pixels: 2,048 x 2,560px
Pixel Pitch: 127
Limiting Resolution: 3.9 lp/mm
A/D Conversion: 14/16 bits
Window Time Min.:13.1 ms ,Max. 120 sec.
Interface(1)Wired : 1Gbps Ethernet;(2)Wireless : 802.11 a/g/n Wireless LAN
Energy Range: 40~330 kVp
Dimension: (W x L x H)320 x 385 x 18 mm
Weight: 3.3kgs,Not incl.handle, incl.battery
HT1417JW DR system consists of one set of industrial DR panel detector and one set DR software .HT1417JW wireless Portable Digital Radiographic system is a real industry DR system for NDT . HATATEST HT1417JW DR equipment flat panel detector is with the advanced , friendly,powerful, intelligent DR software. HATATEST HT1417JW NDT Flat panel detector is produced based on ISO 17636 specification
The Feature of HT1012JW Digital Detector Array (DDA) are:
Scintillator: Gd2O2S : Tb
Active Area:358 x 423 mm
Active Pixels: 2,816 x 3,328px
Pixel Pitch: 127
Limiting Resolution: 3.9 lp/mm
A/D Conversion: 14/16 bits
Window Time Min.:13.1 ms ,Max. 120 sec.
Interface(1)Wired : 1Gbps Ethernet;(2)Wireless : 802.11 a/g/n Wireless LAN
Energy Range: 40~330 kVp
Dimension: (W x L x H) 399 x 475 x 18 mm
Weight: (1)5.0 kg (11.0 lbs);(2)Not incl.handle, incl.battery
560 Miscellaneous Suppliers
Short on time? Let Miscellaneous sellers contact you.
HTJW1012D DR system consists of one set of industrial DR panel detector and one set DR software .HTJW1012D wireless Portable Digital Radiographic system is a real industry DR system for NDT . HATATEST HTJW1012D DR equipment flat panel detector is the only one that can match variable-frequency X RAY Generator all over the world.HATATEST HTJW1012D NDT Flat panel detector based on ISO 17636 specification
The Feature of HTJW1012D Digital Detector Array (DDA) are:
Scintillator: GOS/CSI
Pixel Pitch:125m
Size:34029817mm
Imaging area:300250mm
Pixel matrix:24002000
Limiting Resolution:4.0Ip/mm
A/D:16bit
Energy Range:40-330kv
Working temperature:-10-40
Weight:3.0kg
HT0412JW DR system consists of one set of industrial DR panel detector and one set DR software . HT0412JW wireless Portable Digital Radiographic system is a real industry DR system for NDT . HATATEST HT0412JW DR equipment flat panel detector is with the advanced , friendly,powerful, intelligent DR software. HATATEST HT0412JW NDT Flat panel detector is produced based on ISO 17636 specification
The Feature of HT0412JW Digital Detector Array (DDA) are:
Scintillator: Gd2O2S : Tb
Active Area:97.7 x 292.6 mm
Active Pixels:769 x 2304 pixels
Pixel Pitch: 127
Limiting Resolution: 3.9 lp/mm
A/D Conversion: 14/16 bits
Window Time Min.:â?¤ 10 sec
Interface(1)Wired : 1Gbps Ethernet;(2)Wireless : 802.11 a/g/n Wireless LAN
Energy Range: 40~330 kVp
Dimension: (W x L x H) 160 x 400 x 30 mm
Weight: â?¤2.3kg (include Battery, Handle)
Product introduction:Self-ligating bracket Orthodontic technology is a new technology which has revolutionized the fixed orthodontic technology. The main advantage of bracket self-ligating is to reduce the friction resistance between arch wire and bracket greatly. Because the bracket self-ligating adds a door onto the bracket, it can lock the orthodontic wire directly in the groove of the bracket, eliminating the binding of the ligated wire or elastic ring to the orthodontic wire.Product characteristic:1. Reduce the friction between arch wire and bracket, itâ??s help for movement of orthodontic teeth.2. The bracket self-ligating can shorten the course of treatment and finish it in advance. The traditional bracket orthodontic treatment takes at least one and a half years to two years. The treatment of self-ligating bracket orthodontic treatment can be achieved in about one year.3. Extend subsequent visit time: it needs about 4 weeks to subsequent visit for the traditional fixed orthodontic treatment, that is to say, the patient needs to go to the hospital to adjust once a month, but if use self-ligating bracket treatment, it can extend to 8-10 weeks, the arch wire has enough time to move teeth that means the patient comes to the hospital to adjust every 2 months.4. More comfortable, more beautiful than traditional bracket, more easier to cleanProduct usage: for orthodontic treatment of tooth Production type:You can choose bracket self-ligating according to following type:Roth, standard type/mini type, 0.018/0.022, 3 with hook/ 345with hook/without hookMBT, standard type/mini type, 0.018/0.022, 3 with hook/ 345with hook/without hookEdgewise, standard type/mini type, 0.018/0.022, 3 with hook/ 345with hook/without hookMaintenanceIn the daily maintenance, avoid sticky, hard and acidic food. In the process of use, brush up and down gently use soft toothbrush every day under the guidance of a doctor.Storage:stored in a room with a relative humidity of less than 80%, no
Product introduction: the bite opener wings adopt MIM technology, it is with bond-able 80mesh base.It can easily and effectively stop tongue prickles and thumb sucking.for the orthodontic bite opener, there are two types, one is integral type, the other one is split type.
Application: the bite opener wings is mainly used for deep clasping and opening occlusion, leaving space for pasting bracket of lower anterior teeth.First as the tongue spurs, children are easy to lick the front teeth out, the second as the tongue side baffle to prevent the front teeth too sharp bite into the lower brackets.
Product characteristic:
1.Elimination of occlusal interference
2.Inhibit overactive muscle activity
3.Reduce bond failure of lower bracket
4.the bite opener wings will not cause discomfort to patient.
Features
6 powerful LED tubes emit a high intensive cold blue light with an output at 4800 MW/CM2
Ring-style lamp oxidizes 16 or more teeth
8 time pre-set programs and 3 different light intensity outputs
Make a beep every 5 minutes for warning , and a"three beep" warning indicates the ending of the whole whitening process
20s and 30s time presetting modes apply for the solidification of the gingival protectant
LCD screen shows all the information for better communication between the dentist and the patient
With an average of 10 shades , you can finish the full teeth whitening at one time.
Type: Dental Handpiece
Brand Name: ZZlinker
Place of Origin: Guangdong, China (Mainland),
China Brand: ZZLINKER
Certificate: CE ISO FDA
Package: 10pcs/pack
Feature: Push button, Standard head
Push Button Standard Dental Air Turbine Handpiece
Brief introduction
Protech denture porcelain furnace pt-sy-c-3 is mainly used in denture processing industry. It can also be used for high temperature sintering and annealing of powder metallurgy industry.
Unique features
Digital programmable porcelain furnace
Large size lcd touch screen operating interface
High temperature quartz baking furnace chamber
Long lifetime electric resistance spiral heating wires
Auto-lift and down bottom lifting tray design, stable rising and falling ¡®
Equipped oil free vacuum pump
Main functions
All the parameters shows in one operating interface directly
Quartz heating tube, uniform chamber temperature,
Perfect temperature preservation and stable heating
High accuracy of +/-1.C (33.8 .F)
High lightening led light bar shows the working condition directly
Overnight temperature preservation
Touch screen calibration function
High vacuum degree of -98kpa
Strong protect from the power interference, tempering, temperature compensation function
Easy operating, without noises
Perfect porcelain quality, color and luster
Application
Protech dental porcelain furnace is widely used to process perfect porcelain quality, color and luster in denture processing plant, clinic and hospitals and it is suitable for lots of ceramic materials such as, vita in-ceram, etc.
Technical parameters
Power supply: 220v, 50/60hz
Max. Total power: 1600 w
Working temperature accuracy: +/-1.C
Max. Working temperature: 1150.C
Heating rate: 0~140.C/min
Display: large size lcd operating interface
Input: touch screen
Adjustable program: 100 pieces of programmable curves ( up to 500 pieces is also possible, please contact us)
Furnace chamber size: |¦ì10¡¨¢7 cm
Constant temperature zone : 200mm(¡¨¤1¡æ)
Vacuum level:10^-2 torr by mechanical vacuum pump.
10^-5 torr by molecular pump.
Leak rate < 5 mtorr / min.
Gas flow meter and pressure meter :three gas flow-meters (4% accuracy fs) are installed inside mobile case which are able to monitor gases flowing rate (three different kinds of gases in total)
A. Compact direct read flow meter, 10-100 cc/min.
B. Compact direct read flow meter, 16-160 cc/min.
C. Compact direct read flow meter, 25-250 cc/min.•four pressure meters are installed inside mobile cart which are able to monitor three types of flowing gases pressure as well as the pressure of mixing tank.
Max. Power :4.5kw
Working voltage:ac220v/110v single phase, 50/60 hz
Temperature control:pid automatic control via scr (silicon controlled rectifier) power control, with 50steps programmable
Communication interface : rs485
Outside size : 630¡¨¢460¡¨¢560mm
Protech high temperature melting furnace is mainly used for the melting of precious metal, such as, gold, platinum, silver, etc, and other metals, such as, copper, iron, stainless steel. It is an ideal equipment for jewery processing,
Electric or mutual puring furnace body, easy to discharge, esp, suitable for casting
Tilt melting pot
Main technical specification
Name Melting furnace
Model Ptc-1700r
Operating interface Touch panel or button type for your option
Max. Temperature 1700.C
Working temperature <=1650.C
Heating rate Max. : 20.C/min (advice 10.C/min)
Heating zone Single heating zone
Heating zoen height 120mm
Heating zone dia. 120mm
Temperature accuracy +/-1.C
Heating method Four week
Sealing method Open cover
Temperature curves 50 segment ¡¡ãtime-temperature¡¡à curves adjustable
Persisting curves Storing multiple pcs curves
Over-temperature alarming Yes
Over current protection Yes
Thermocouple broken alarming Yes
Temperature measuring components B type thermocouple
Heating element 1850 type heating rods
Furnace chamber material Alumina ceramic fiber
Time warranty One year quality warranty, life time quarantee repairing
Package Polywood wooden case
Accessories included Temperature sensors, protection gloves, crucible tong, crucibles, etc
1. 4 working modes: Strong, low, gradually strong, flashing; Being saved automatically
2. Adjustable working time: 5s~40s; Being saved automatically
3. High power LED with pure blue light: To solid any brand of resin material
4. Constant light intensify: To prevent the solidification effect from being affected by the low battery
5. Over-temperature protection by real-time monitoring LED
4. High capacity rechargeable battery with longer duration
5. Ergonomics design with elegant appearance to bring the convenient operation.
1. TFT- LCD screen, bringing fantastic visual impact
2. Four working modes: Strong, low, gradually strong, flashing, which can be saved automatically
3. Adjustable working time: 5s, 10s, 15s, 20s, which can be saved automatically
4. High power LED with pure blue light, which can solid any brand of resin material
5. Constant light intensify preventing solidification effects from being affected by the low battery
6. Over-temperature protection by real-time monitoring LED
7. With Wire/wireless style as well as stand charger or adaptor
8. High capacity rechargeable battery with longer duration
9. Ergonomics design with elegant appearance, bringing convenience for the operation
10. Light meter attached: The technology of light-power-testing is adopted in the charging bas.
Features:
1. Wide, colored LCD, which visualizes the treatment process clearly;
2. Self-calibration, which keeps the minimum inaccuracy from long use;
3. Multi-frequency operating system, which ensures the accuracy in any condition;
4. Different sounds of the buzzer, which informs you the trace of file;
5. Large capacity rechargeable Li-ion battery, which prolongs the working hours;
6. All the accessories can be sterilized under high temperature (>135);
7. Autoclavable file holder and contrary electrode, which avoid cross infection.
Carton.
560 Miscellaneous Suppliers
Short on time? Let Miscellaneous sellers contact you.
