PTFE products, silicone composite products, PTFE products manufacturing machinery.
Liquid silicone rubber, RTV-2 silicone rubber, condensation cure silicone rubber, addition cure silicone rubber, food grade silicone rubber.Technical support, new products developing
FRP pultrusion profiles, FRP moulded grating, FRP lighting pole, FRP profiles, FRP products, FRP grating.
Mono silicon wafers, silicle solar wafers.
Silicon, silicon rubber.
RTV-2 molding silicone, addition silicone, pad printing silicone rubber, life casting silicone, electronic potting silicone rubber, FDA silicone, silicon oil, manual mold silicone, LSR, trademark silicone rubber, textile coating silicone rubber, liquid silicone rubber.
Sulfur for agriculture, minimum order 1000ton/order.price is according payment procedure.
Ferrosilicon is a ferroalloy composed of iron and silicon. Ferrosilicon is an iron-silicon alloy made of coke, steel chips, quartz (or silica) as raw materials and smelted from an electric furnace. Ferrosilicon is often used as a deoxidizer in steelmaking, and it is also beneficial to increase the temperature of molten steel while deoxidizing. At the same time, ferrosilicon can also be used as an alloying element additive, widely used in low-alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, ferrosilicon in alloy production and chemical industry, commonly used as a reducing agent
SPK Customized MoSi2 heating element MoSi2 resistive heating element is a high temperature resistant and anti-oxidation resistance heating element based on molybdenum disilicide. When used in high-temperature oxidizing atmosphere, a layer of bright and dense quartz (SiO2) glass film is formed on the surface, which can protect the inner layer of the silicon molybdenum rod from oxidation, so the silicon molybdenum rod element has unique high-temperature oxidation resistance. Under oxidation atmosphere and the maximum service temperature is 1800 �¢??, the resistance of the silicon molybdenum rod electric heating element increases rapidly with the increase of temperature, and the resistance value is stable when the temperature is constant. Under normal conditions, the element resistance does not change with the length of service time, so the new and old silicon molybdenum rod heating elements can be mixed.
As the new alloy for converter, Silicon Carbon Alloy can replace Ferro Silicon to be used as deoxidizer. Â lower steelmaking cost, increase economic benefit, improve product quality and stable performance.our silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors. Aluminum manufactures to improve the useful properties of aluminum, as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic.
Silicon briquette is a good substitute for FeSi in steel making, which has advantage in lowing the costs of production and reusing resources. This product is the new product we developed and mainly repressed by silicon metal slag. Now, there are far and wide market in domestic and South Korea.our silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors. Aluminum manufactures to improve the useful properties of aluminum, as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic.
Our factory have silicon metal powder grinding workshop and R&D centers with annul processing capacity of 50,000 tons. The main grades include 2202,3303,441,421'411,553etc Grinding sizes:can be processed according to customers' specification.our silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors. Aluminum manufactures to improve the useful properties of aluminum, as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic.
Silicon Metal, also known as crystalline silicon or industrial silicon, is mainly used as an additive for non-ferrous alloys. It is a product made by smelting quartz and coke in an electric furnace. The main element silicon content is about 98%, and the remaining impurities are iron and aluminum, Calcium, etc.our silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors. Aluminum manufactures to improve the useful properties of aluminum, as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic.
Place of Origin: Guangdong, China Brand Name: CMAI Model Number: CM195 Processing Service: Moulding, Cutting Colors: Custom color LOGO: Custom sample Type: Value OEM/ODM: welcome size: Custom size Feature: Sustainable
Brief description YJS-525 is medium hardness silicone with hardness Shore A 25. It is a kind of of two- component materials consisting of a flowable part A which when mixed with the curing agent or catalyst,cures at room temperature by a condensation recation. It is widely used for resin, gypsum, concrete/cement and artificial stone molding. Features -Easy to demould -Good resistance to tearing -Good elastic -Good tear&tensile strength -Dimensional stability in time ( deformation - shrinking only up to 0.3 % ) -Remarkable resistance to high temperatures (up to 200 - 220â?? ) -Final curing at room temperature Specification Typical general characteristics Inspection Method Value Product data (Catalyzed A+B) YJS-525 Hardness Shore A 25�±2 Mix Ratio A:B 100:2 Color / White Pot life 25 �°C (77F) 30-40mins Curing time 25 �°C (77F) 3-4 hours Mixed viscosity mPa.s 15000�±1000 Tear-strength kg/cm â?¥25 Tensile-strength M.pa â?¥4.2 Elongation % â?¥480 Shrinkage % â?¤0.3% Package * Small size:1kg/jar A +20gram/jar B, 12 jars in one carton. MAX 336KGS in one pallet 5kg/jar A + 100gram/jar B, 6 jars in one carton. MAX 750KGS in one pallet(metal drum) 5kg/jar A+ 100gram/jar B, 4 jars in one carton. MAX 480KGS in one pallet(plastic drum) * General size: 20kg/pail A +400gram/pail B, 18 pails or 24 pails or 27 pails in one pallet 25kg/pail A + 500gram/pail B, 18 pails or 24 pails or 27 pails in one pallet 200kg/pail A + 4kg/pail B, 2 pails or 4 pails in one pallet 1kg package 12 jars in one carton. MAX 336KGS in one pallet 5kg metal drum 6 jars in one carton. MAX 750KGS in one pallet(metal drum) 5kg plastic drum 4 jars in one carton. MAX 480KGS in one pallet 20kg or 25kg plastic drum 18 pails or 24 pails or 27 pails in one pallet 20kg or 25kg metal drums 18 pails or 24 pails or 27 pails in one pallet 200kg metal drum 2 drums or 4 drums in one pallet Storage YJS-525 has a shelf life of at least 12 months in the sealed container between 5 C and 30 C. If the material is kept beyond 12 months it is not necessarily unusable, but a test should be performed on the product to check suitability to the application
Essential details Place of Origin: Guangdong, China Brand Name: Cmai Type: Insulation Sheet, Insulation Sheet Material: Silicone, 100% silicone Application: High Voltage Rated Voltage: 220V thickness: customizable Hardness: customizable Certificate: ROHS Product name: thermal conductive pad Color: customizable Size: customizable Sample:Avaliable Usage: Insulation Protection Supply Ability: 100000 Piece/Pieces per Day
Metallic silicon, also known as crystalline silicon or industrial silicon, is mainly used as an additive for non-ferrous alloys. Metallic silicon is a product made of quartz and coke smelted in an electric furnace. The content of the main component silicon is about 98%, and the other impurities are iron, aluminum, calcium, etc. In industry, silicon metal is usually produced by reducing silicon dioxide by carbon in an electric furnace. Chemical reaction equation: the purity of silicon prepared by SiO2+2C Si+2CO is 97 98%, which is called metallic silicon. Then it is melted and recrystallized, and impurities are removed with acid to obtain metallic silicon with purity of 99.7~99.8%. Metal silicon particles: 1-200mm silicon metal should be used to produce organic silicon, produce high-purity semiconductor materials and prepare alloys with special purposes. (1) Production of silicone rubber, silicone resin, silicone oil and other silicone. (2) Manufacture high-purity semiconductors. (3) Prepare alloy. (4) It is an excellent antioxidant in refractory and powder metallurgy industries. Our company can provide various specifications and models of metal silicon blocks, particles and powders according to customer requirements.
ferro silicon nitride powder is applicable to stainless steel smelting, special alloy steel smelting, oriented silicon steel smelting and other casting industries. As a new type of refractory material, it is applied in the metallurgical field, such as metallurgical furnace body, furnace mouth seal, ironmaking furnace outlet, iron hook amorphous material and nitrogen additive in the steelmaking industry. Silicon nitride material can be used as abrasive material for abrasive tool manufacturing, and can also be used in chemical fields such as acid resistance, alkali resistance and corrosion resistance. In terms of steelmaking, granular ferro silicon nitride is mainly used in the production of oriented silicon steel at the initial stage, and it can stably supplement a certain amount of nitrogen for molten steel. Items Fe-Si3N4 chemical component(%) Si3N4 70-80 N 25-31 Si 45-52 Fe
Product Type: Lump Material: Silicon Metal Usage: Steel Making, Aluminum Making, Deoxidizer Standard: 97 98 553 441 3303 2202 Packing: 1ton/Bag Silicon Content: 99%
Insoluble sulfur HS OT20 / Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur IS7020 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30