Construction waste & demolition sorting system
Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on.
Applications of Construction waste & demolition sorting system:
Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic.
Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc.
Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on.
Capacity: 100 tons per ho ur to 800 tons per hour.
Machine pictures and processing chart of Construction waste & demolition sorting system:
Process Description of Construction waste & demolition sorting system:
The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop.
WCW-800 List of Construction waste & demolition sorting system:
Number Model Name Quantity
1 ZSL-80 Drying to mud screening system 1
2 FXJ-800 Light material selection system 1
3 GTS-800 Roller sieve 1
4 PP1315 Impact Crusher 4
5 2 # dust removal system 1
6 1 # dust removal system 1
7 RCVD-15 Separator 2
8 PE1215 Jaw Crusher 1
9 ZSW1560 Vibration feeder 1
10 3YK3073 Circular vibrating screen 2
COBALT CHROMIUM ALLOY ELGILOY :(Composition (Nominal): 40 Co ., 20 Cr., 15 Ni , 7 mo , Fe Balance ;( ELGILOY alloy exhibits high strength, ductility, fatigue life, and good mechanical properties. Corrosion resistant in numerous environments.:(Specifications: ASTM-F1058):(1. Mechanical Property can be improve with Cold Worked & Aged process; (2. Rod forms fully compliance with chemical component; :(3. Annealed possible for wire & Strip ;: (Product availability and request a QUOTE!
Elgiloy alloy property data sheet - product availability and request a QUOTE! :(Composition (Nominal): 40cobalt-20chromium-16iron-15nickel-7molybdenum ;( Elgiloy® alloy exhibits high strength, ductility, fatigue life, and good mechanical properties. Corrosion resistant in numerous environments.:(Specifications: ASTM-F1058):(1. Mechanical Property can be improve with Cold Worked & Aged process; (2. Rod forms fully compliance with chemical component; :(3. Annealed possible for wire & Strip
Material: Q235/55Q
Weight: 8.94KG/M
Length: 6-12m
Main Function:
Light rail is mainly orient ed and load bearing, it is used with the track wheel, to support the weight and change the direction of the cart.
Automatic Longitudinal Seam Welding Machine for Flat Metal Sheet
Â
1. Welding Requirements:Â
To finish the flat metal sheet butt joint welding automatically. To guarantee the uniform surface forming and good appearance, the depth of fusion and width of fusing reach the welding requirement. It is easy to clamp and load. Adopts butt welding process, it requires one side welding both sides formation.Â
2. Equipment Composition
The machine is made up of gantry type working table, welding torch longitudinal moving mechanism, pneumatic clamping bar mechanism, loading and unloading table, fixture, conductivity mechanism, welding torch lifting, clamping and adjusting mechanism, electrical control system, welding power source and pneumatic system.Â
The welding torch is driven by air cylinder to move up and down to switch between preparation and welding station. It adopts push-wire feeding mode to ensure the wire feeding stability.Â
The torch can move up and down, left and right and angle fine adjustment. The welding torch forward and backward distance can be set according to the length of workpiece.Â
2) Pneumatic clamping bar mechanism
Pneumatic clamping bar mechanism is driven by air cylinder to press the workpiece evenly. The clamping bar head is made of copper plate. It will lift after finishing welding process, then unload workpiece.Â
3)Gantry type working table
The working table consists of fixed station, water cooling copper back clamping bar, up and down pneumatic positioning mechanism. The fixed station adopts welded bed. Base is welded by square tubes and steel plates.Â
The upper face machined and mounted with copper back clamping bar, which has a water cooling system to ensure the temperature of back clamping bar is not to high to affect the welding result. To realize the effect of one side welding and both sides formation.Â
Three pneumatic positioning air cylinders drive the positioning plate up and down to control the seam position. When the workpiece is positioned the length on the working table, the clamping bar presses the workpiece tightly, positioning air cylinders falls down and starts to weld.Â
3. Electrical system:Â
1. )Â It is controlled by imported PLC, with good stability, simple structure and easy maintenance.Â
2) Using Taiwan original touch screen as input and output interface, welding length, arcing igniting and arc ending time, welding current, welding voltage and welding speed can be all input through the interface.Â
3) Integrated control panel box. Control buttons, touch screen, welding specification are concentrated on one panel, it is easy to use and operate.Â
4 )Â Welding power source: It is chosen by customer.
Powder metallurgy is a manufacturing process where various powder metals such as stainless steel, brass, copper, iron and bronze are compressed and then sintered (heated) to increase adhesion between particles. Material blending allows for a certain amount of customization of material properties to produce desired characteristics suitable for a particular application.
The part is formed by compressing the powder metal, or blended metal powders, in accurately formed dies and punches in special types of hydraulic presses. The compressed pieces are then sintered in an atmosphere controlled furnace at high temperatures, causing the metal powder particles to be metallurgically bonded together. This remarkably greenand environmentally friendly process uses 99% of the material thats in the mold, producing harmless bi-products of nitrogen and hydrogen.
Optional operations include sizing or coining. Supplementary heat treatments may also be employed to increase material strength. Other optional finishing steps include milling & machining, grinding, drilling & tapping, reaming & other hole sizing, plating, and cu, plastic or oil impregnating. The result is high density parts comparable to wrought products of the sam e composition and surpassing plastic and die cast material properties. Lower density will, of course, result in lower physical properties; however, these parts can be used in filter or air flow applications.
Steel Props
Aluminum Formwork Accessories
Aluminum Formwork
ColorïOrange, dark red, blue,green, or as your required
TypeïHeavy Duty or Light Duty
Weightï4.74kg--30kg
ApplicationïSlab or formwork supporting
Building Climbing Frame Mesh
Aluminum Formwork
Aluminum Alloy Formwork System
Size 1) Mesh Thickness: 0.4mm-1mm
2) Common Size: 1mx1.5mï1mx1.8mï1mx2m
3) Frame side tube: 2cm*2cm,
4)Tube Thickness: 1.5mm-2mm
Hole Shape Round hole
Surface Treatment Powder coated,pvdf,anodized,PVC coated.ect
Characteristics Corrosion resistance,beautiful and long life
Packing 1.LCL:packed with plastic film then on the pallets
Our Products Building Climbing frame mesh
Size 1) Mesh Thickness: 0.4mm-1mm
2) Common Size: 1mx1.5mï1
mx1.8mï1mx2m
3) Frame side tube: 2cm*2cm,
4)Tube Thickness: 1.5mm-2mm
Hole Shape Round hole
Surface Treatment Powder coated,pvdf,anodized,PVC coated.ect
Characteristics Corrosion resistance,beautiful and long life
Packing 1.LCL:packed with plastic film then on the pallets
2.FCL:Nude packing
3.Other special package according to customers' requirements
Payment Terms T/T(30% deposit,70% balance against BL copy),or L/C,Paypal,
Western Union,Money Gram,Credit Card,OA
Product name:paper organizing metal clip
Office organizing clip, paper organizing metal clip, hanging photos clip, displaying notes clips perfect for hanging photos, displaying notes and locker for office uses
Size:32mm*11.5mm
Certificates: authorized CPST testing report is available (pls refer to attached images)
Sample availability: Yes.
Sample ready time: 1 day
MOQ: 2000 PC
Mass production lead time:15-18 days
Packing: 1. 500 pc bulked in opp bag.
2. several pieces per small opp bag.
3. can be packed as customers' require.
Shipping: by DHL, UPS,FEDEX, TNT.
Shipping time: generally 5-7 days.
1, Product Information:
ZHWs expansion bellows Series EBF521 can withstand extreme variations in temperature ranging from very low to high temperatures i.e. from Cryogenic up to 600 °C. Stainless steel bellows are diffusion tight, have an excellent chemical resistance as well as high physical strength. On top of it, stainless steel bellows have very good corrosion characteristics. United Flexible bellows and expansion joints are generally produced and assembled in sizes from nominal 40 mm (1-1/2�) up to nominal 2000 mm (0�).
2, Product Applications:
Decreasing vibration of rotating parts, the joints can be used in pressure system, pump, motor, machine equipment, compressors, industrial pipeline construction, gas and water transportation pipeline.
3, Product Features:
Reasonable structure, good elasticity, large range of compensation pipeline and little counterforce to the brackets of pipeline.
Shock absorption and noise decrease, heat and dust insulation, environmental protection and simple structure bracket.
The displacement can be deflected to prevent damagment caused by subsidence of connected brackets and equipment base. It can adapt itself to the centrifugal difference of pipeline installation to provide convenience to installation and maintenance.
Good resistance to milling, heat, aging and corrosiveness and long service life.
Little resistance and little weight. Each performance is better than the compensation device of other materials.
The temperature range of media is wide:-40--300°c.
1, Product Information:
Dismantling joint consist of flanged loose expansion joint, short-pipe flange and transmission screw. The short pipe shall have some expansion displacement. During the installation size in situ. Under normal working conditions, the axial thrust can be transmitted to the whole pipe, which not only improves the work efficiently but also protects pumps and valves, and there shall be no axial transmission in operation.
2, Product Description:
ZHWs dismantling joints Series C2F are particularly suitable for simplifying the installation and removal of isolation valves, control valves, check valves, non-return valves, flow metering valves, pump sets, pressure reducing valves, flanged pipe and fittings.
Designed and manufactured to G/B standard and tested to the most exacting requirements of customer for use with different application.
The simplicity and versatility of the fittings make them suitable for many applications including pumping stations, water treatment works, sewage treatment works, plant rooms, meter chambers, power generation equipment, gas distribution stations.
3, Product Applications:
Municipal Engineering
Chemical Industry
Metallurgy
Petroleum
Environment Protection
Light Industries
Mining Industry
Ships
34682 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
