Main technical parameters:
Standard width: 1300 mm
Wire diameter range: 0.05-0.45mm
Weaving density: plain weave square hole15-260 mesh; twill weave up to 400mesh
Speed: 120 (140 optional) RPM
(the actual speed depends on the weaving width and detailed specifications), Step-less speed regulation of frequency converter
Heald frame and form: Tappet arch heald(three type available -Tappet arch heald, rotating electronic dobby and servo dobby). And 2-20 pieces of aluminum alloy heald frame (optional).
CNC: Precise and fast one way linear weft leading is controlled by high performance servo motor under PLC control. Adopt Numerical control let -off (feeding warp wire ) by AC servo motor, real time display tensions data also automatic adjustment. AC servo motor CNC coiling
Basic tension 20000N/M
Weight 45000kg
Outline size 2750mmX3300mmX1500mm
Voltage:AC220V/380V
Power:750W
Blade:6/8inch
Function:the aluminum gem cutting machine adopt high quality aluminum surface, and using 8 inch blade, the 20mm,25mm inner bore blade can also be installed. It's convenient to use and durable which is suitable for precise cutting.
The quality inspection of die forgings includes appearance quality inspection and internal quality inspection, including numerous inspection items respectively. The first is the chemical composition inspection, usually based on the smelting before the furnace sampling analysis as. Especially for important or suspect die forgings, some chips can be cut from the forgings and chemical composition can be tested by chemical analysis or spectral analysis.
Secondly, the size and shape of die forgings are checked. Visual inspection is a more common method to observe the surface of forgings with the naked eye whether there are folding, cracks, bruises, scars, surface burns and other defects. And the surface of die forgings hidden deep defects, often after heat treatment and cleaning for observation. And its dimension measurement inspection includes length, width and height dimensions; Parallelism and perpendicularity of the plane; The curvature of the axis; Ellipticity of inner and outer circles; Radius of fillet; The concentricity; The included Angle and the misshift, etc.
When the die forgings are required to carry out the precise size inspection, in addition to the marking inspection and the special sample can be used, the inspection instrument controlled and analyzed by the computer can be used, or the optical comparator, optical projector can be used for the relevant size inspection, to ensure the accuracy of the inspection results.
Surface flaw detection is also a part of the quality inspection of die forgings. The surface quality of membrane acid and base is determined by magnetic particle test and fluorescence test. In addition, there are ultrasonic inspection, low tissue inspection, microscopic inspection, residual stress inspection and so on, each link can not be ignored.
The preparation of free forgings before forging includes raw material selection, calculation, blanking, heating, measurement of deformation force, selection of equipment and design of abrasive tools. Before forging, you need to choose a good way of wetting and lubrication fluid. Forging with a wide coverage of raw materials, with a variety of steel grades of steel and high temperature alloy, and aluminum, magnesium, titanium, copper and other rare metals
Henan Shuangzhi can produce custom alloy steel forgings, if you need custom alloy steel forgings, you are welcome to contact us
The basic technological process of hot ring forging is shown in the figure. Taking 42CrM0 material as an example, the cylindrical blank is heated to about 1150â?? for upsetting, punching and de-peeling to get the ring blank, and then the ring blank is put into the radial axial ring rolling machine for milking until the size requirements are met.
Henan Shuangzhi can be forged custom, processing ring forgings, plate spring forgings, crankshaft forgings and other kinds of mining equipment forgings, set production and design in one, if you have relevant forgings procurement needs, welcome to contact us.
Henan Shuangzhi Machinery Equipment Co., Ltd. is a professional forging processing and production of forgings. Products can be produced according to the drawing, chemical composition, free forging, die forging, rough machining, heat treatment, finishing integration. Long-term cooperation with petroleum, chemical, mining, and other enterprises. Supporting the production of sprocket, gear, gear ring, ring, cylinder, shaft, cylinder, block, module, support seat, flange and other forging products. If you need custom forgings, you are welcome to contact us in time.
The casing head is a kind of part connecting casings and wellheads.
The casing head is a kind of part connecting casings and wellheads. It provides a transition joint for the tubing head.wellhead christmas tree design and other wellheads.Both top and bottom connections are API 6A flanged, and the flanges are provided with locking bolts. AQE� Casing Heads have a straight bore bowl with 45 C landing shoulder design which avoids damage to sealing areas by drilling tools and prevents test plug and bowl protector wedging problems when pressure is applied. Casing Heads are normally furnished with threaded outlets and studded outlets are available upon request. Bottom connections can be furnished threaded or slip-on for welding.
Shaft forgings occupy an important position in forgings and are widely used in mining machinery, petroleum machinery, chemical machinery, etc. Shaft forgings are often used as the basic parts of equipment and the core parts of mechanical equipment, which have higher quality requirements, so the forging process requirements are also more stringent.
In order to meet the performance requirements of shaft forgings, in the process of producing forgings with forging hydraulic press, it is necessary to constantly measure their diameters, and then feed the results back to the control system, which can adjust the pressing volume of the press to obtain the final size of forgings. Generally, shaft forgings are completed in the following three stages.
The first stage: forging and compaction are required for loose and porosity defects of steel to obtain forged microstructure, meet mechanical properties requirements.
The second stage: complete forging of internal porosity defects to prevent new internal cracks.
The third stage: control the generation of mixed crystal.
The forging process of shaft forgings should be as simple as possible, with less heat and no upsetting. To effectively separate the forging compaction from the final forging forming. As a forgings manufacturer, Henan Shuanzhi produces all kinds of mining machinery forgings, petroleum mechanical forgings, chemical mechanical forgings, etc.
Die casting mold manufacturing, die casting mass production, post processing, surface treatment, OEM& ODM, operating under a standardized management system
The industry we serve:
Automotive components, Electronic component, Hardware components and Furniture components etc.
Hydraulic mill roll stand Specification
Symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc.
Equipment was made of HT200-wide casting.
Maximum loading of one side arm 1500-2000kg
Each stand with two set track and trolley for carry paper.
Pneumatic braking
Electrical components are controlled centralized(domestic brank)
One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw
YIKE GROUP Hydraulic mill roll stand Advantage
Shaftless mill roll stand
Portable sand blast machines are mainly used to clean bigger components on-site, like steel structure, bridge, big tank body, used for big tanks vessel repaire, pipe rust removing at oil field, container renew, etc, and generally used in open, or used in very big blast rooms.
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting.
Portable pressure blasting machines .
4720P, 6230P to be supplied with pressure blast machine fitted with remote control system, abrasive valve, moisture separator, 10 meter remote control hose, 10 meter heavy duty blast hose with nozzle holder, coupling and venturi boron carbide blast nozzle.
6230(2)P to be supplied with two outlets allows two operators to work without interference.
Model:4040P
Diameter (mm):00
Heigh (mm) :1000
Weight (kg) :65
Pot Volume (L):80
Outlet :1
Blast hose ID (mm) :3/4"
Compressed air consumption (m3 /min) :3.5
Woking pressure (bar):5-7
Remote control :Pneu. or elec.
portable or Stationary :portable
Model:4720P
Diameter (mm):600
Heigh (mm) :1450
Weight (kg) :175
Pot Volume (L):270
Outlet :1
Blast hose ID (mm) :1-1/4"
Compressed air consumption (m3 /min) :4.5
Woking pressure (bar):5-7
Remote control :Pneu. or elec.
portable or Stationary :portable
Model:6230P
Diameter (mm):900
Heigh (mm) :1900
Weight (kg) :400
Pot Volume (L):600
Outlet : 1,
Blast hose ID (mm) :1-1/4"
Compressed air consumption (m3 /min) : 4.5;
Woking pressure (bar):5-7
Remote control :Pneu.
portable or Stationary :Stationary
Model:6230(2)P
Diameter (mm):900
Heigh (mm) :1900
Weight (kg) :430
Pot volume (L):600
Outlet : 2,
Blast hose ID (mm) :1-1/4"
Compressed air consumption (m3 /min) : 9
Woking pressure (bar):5-7
Remote control :Pneu.
portable or Stationary :Stationary
Model:6060A
Diameter (mm):600
Heigh (mm) :1200
Weight (kg) :255
Pot volume (L):200
Outlet :1
Blast hose ID (mm) :1/2"
Compressed air consumption (m3 /min) :1.5
Woking pressure (bar):4-7
Remote control :Elec.
portable or Stationary :portable
Round Vibratory Finishing Machines are specially designed for processing of all types of components, from high gloss polishing to heave deburring, radiusing, chamfering, grinding, descaling, degreasing, washing...
Compact design.
High abrasive efficiency, good surface finishing result.
Heavy-duty electric vibration motor.
Adjustable vibration control.
High durable hot-poured polyurethane lined processing bowl to reduce the collide and prolong processing bowl working life.
PLZG / PLZGC (with cured wall) without integrated screening system, features flat-bottom, for processing a wide range of components from small, middle, delicate parts to large marble slabs, which easy damaged by dam and separation screen, or for a variety of parts of different sizes and batches, where automatic unloading does not have any particular advantage.
Option:
Variable frequency drive speed controller control for automatic operation.
Sound-proof lid to reduce noise.
Compound metering system
Centrifigual Disc Finishing Machines deburring, grinding, polishing from China at good prices.
Centrifugal Disc Finishing Machines are specailly suitable for removal of strong burrs, intensive radiusing of small and mid-size parts as well as gently smoothing and high gloss polishing.
Characteristics:
High speed processing allows for finishing performance upto 10 times faster than vibratory machine and over 20 times than barrel machine.
Infinitely adjustable speed of the spinner
Low noise, movement smoothly and stably.
The working barrel is lined inside with hot poured high wear-resistant polyurethane for protracting working life.
Product Specification/Models
LLB10, LLB20, LLB50, LLF50 and LLF120, the working barrel can be manually pivoted 100 degree for easy discharging of medias and parts.
Round Vibratory Finishing Machines are specially designed for processing of all types of components, from high gloss polishing to heave deburring, radiusing, chamfering, grinding, descaling, degreasing, washing...
Product Feature
Compact design.
High abrasive efficiency, good surface finishing result.
Heavy-duty electric vibration motor.
Adjustable vibration control.
High durable hot-poured polyurethane lined processing bowl to reduce the collide and prolong processing bowl working life.
LZGS / LZGC with an integrated screening system consisting of manually (standard option) or pneumatically activated separation flap and a built-in separation screen.
Manually (standard option) or pneumatically activated separate flap for automatic separation, media and components are delivered over the separation screen and the media returns through the screen to the bowl and components discharge to a collect bin or secon dary operation. This series machines are suited for the processing of high production, small components, or flat, lightweight parts which easy stick together. They are also suitable for steel ball burnishing processing.
Changeable separation unit.
Extra long screening zone? Easy separation of flat parts
Option Variable speed controller panel with timer and controlled separation flap for automation.
LZGC series processing bowl features a spiral-bottom helical geometry walls allow a damage-free processing of delicate components and preventing flat, thin parts from sticking together.
LZGS series processing bowl features flat bottom with a built in spiral ramp for processing of delicate parts
LZGS Optional side mounted parts in-feed chute facilitates integration into automatic manufacturing processes.
Options:
Variable frequency drive speed controller control for automatic operation.
In-feed chute (only for LZGS series) for connection with other machinery for automatic processing line.
Pneumatic operated separation flap for automatic operation.
Sound-proof lid to reduce the noise
Compound metering system
Product Specification/Models
Model Capacity (L) PU (mm) Power (KW)Dimensions LxWxH (mm) Weight (KG)
LZGS100 100 20 1.5 1300x1150x860 340
*LZGS100Z 100 20 2.2 1300x1150x860 340
LZGS150 150 20 2.2 1250x1200x1020 360
LZGS200 200 20 3.0 1200x1200x1100 650
LZGS300 270 22 3.7 1400x1350x1000 650
*LZGS300Z 270 22 5.0 1400x1350x1000 650
LZGS400 480 24 5.0 1480x1430x1100 780
LZGS600 660 26 5.5 2000x1800x1350 1400
*LZGS600Z 660 26 7.5 2000x1800x1350 1400
*suitable for steel ball burnishing
