Stamping is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining.[1] This could be a single stage operation where every stroke of the press produces the desired form on the sheet metal part, or could occur through a series of stages. The process is usually carried out on sheet metal.
Stamping parts have applications in almost all industries like automotive, electrical, medical, appliances etc. Forms and type of the stampings differ as per the design.
Processing: Sheet metal cutting and stamping;
Material range: Aluminum, stainless steel, copper, etc;
Common surface treatments: Bead blasting, anodizing, powder coating, etc.
Lead time:3-7 time.
35054 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
Silvery white, lustrous, solid metal. Soluble in sulfuric acid, nitric acid, potassium hydroxide and potassium cyanide solution. Insoluble in water. Imparts garlic-like odor to breath, can be depilatory. It is a p-type semiconductor and its conductivity is sensitive to light exposure.
Hazards:
(metal and compounds, as te): toxic by inhalation. Tolerance: 0.1 mg/m3 of air.
Applications:
Tellurium could be used in different fields, according to its purity. It could be used as infrared detector materials, solar cell material, cooling material and so on. Mainly applied for compound semi-conductor, solar energy cell, electrothermic transition element, cooling element, air-sensitive, thermosensitive, pressure-sensitive, photosensitive, piezo-electric crystal and nuclear radiation detect, infrared detector and basic material.
Introduction
Pure Zinc & Zn/5Al are excellent material choices for corrosion protection in both atmospheric and marine environments. Using either the electric arc spray or combustion wire process, wire coatings of these materials
act as sacrificial anodes, galvanically protecting iron or steel substrates.Decades of field work using these coatings has clearly demonstrated that they are far more effective and longerlasting than hot dip galvanizing.
Coatings of ZnAl often have better corrosion resistance than either pure zinc or aluminum, by combining the advantages of both materials. This is particularly true in areas where crevices exist and residual moisture and contamination is present, and in areas where the coating has been scratched or scraped, resulting in coating voids and exposed substrate.
Using the electric arc spray process, coatings of these materials are often used in the electronics industry for EMI and RF shielding, or as conductive coatings on capacitors.
Typical Uses and Applications
Atmospheric and immersion corrosion protection on large steel or iron structures such as bridges, roadway
barriers, posts and poles, offshore structures and marine structures.
Atmospheric corrosion protection on steel or iron components such as tanks and gas bottles
EMI and RF shielding on plastic components (electric arc spray only)
Electrical conductance on components such as the Conductive areas on insulators and capacitor end caps
Product Details
Chemical composition:
Type Chemical composition
Zn Al Others
Zn 99.9+ Balance
0.1
Zn 15Al Balance 15
Standard Sizes & Packing:
Diameter Packing Wire Weight
1/16 (1.6mm) D 300 Spool 15kg((33 lb)/spool
Other sizes can produced based on customers' requirement.
Function:
Cold stamping cable hook for suspension and protection of underground power supply cables in coal mines
Mining metal cable hooks bundle various cables in the mine
Communication cable hook
Product description:
It is made of hot-rolled flat steel with a stamping die to form a device for hanging cables on the right side. According to customer requirements, it is processed into a single row or multiple rows of arc-shaped hooks with holes fixed to the wall at both ends. Mold development and design
Specification:
Single row, double row, customized according to customer requirements
Service:
OEM ODM Non Standard Customized Processing
Wire Cutting:
Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: 0.02 mm
Laser Cutting:
Carbon Steel: 0.5 mm - 16 mm Stainless Steel: 1 mm - 8 mm Aluminum Alloy: 1 mm - 8 mm Brass: 1 mm - 4 mm
Max Size: 4000 mm * 2000 mm Positioning: �±0.03 mm Repeated: �±0.02 mm Maximum Speed: 169 m/min
Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion
Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire.
Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels.
Introduction of Carbide Wire Guides:
High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC);
Hot hardness (up to 900 ~ 1000 �°C, keeping 60HRC);
Good wear resistance
There are V-groove, R-groove, U-groove trough over other.
V-groove with 90 , 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.
The implemental standards for the oil casings are API 5CT; the specifications include from 60.3 to 508mm; the steel grades include J55, K55, N80, L-80, P-110, C-90, C - 95, T-95 and so on; the merchantable claspers areSTC , LTC, BTC .
The implemental standards for the oil pipelines are API 5L; the specifications include from 219.1 to 2032mm; the steel grades include Gr.B, X42, X46,X56,X60,X70,X80 and so on
At the same time we also supply a large number of seamless steel pipes in different uses, such as fluid pipes and structural pipes. Besides that, we have many years of co-operation ships with Tianjin Large Seamless Company, Baogang Steel Pipe Company, Anshan Steel Pipe Company, which make sure our abundant resources.
If you have any needs,hope you feel free to contact us!
Name: Sheet Metal Parts for Breathing Machine of Medical Device
Material: Aluminum 3031
Thickness: 3mm
Size: 305mm*250mm*100mm
Weight: 425g
Surface: Oxidation processing
Processing: Laser cutting /Bending/Abrasive blasting/Oxidation
Usage: Medical device /Medical care equipment
Construction waste & demolition sorting system
Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on.
Applications of Construction waste & demolition sorting system:
Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic.
Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc.
Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on.
Capacity: 100 tons per ho ur to 800 tons per hour.
Machine pictures and processing chart of Construction waste & demolition sorting system:
Process Description of Construction waste & demolition sorting system:
The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop.
WCW-800 List of Construction waste & demolition sorting system:
Number Model Name Quantity
1 ZSL-80 Drying to mud screening system 1
2 FXJ-800 Light material selection system 1
3 GTS-800 Roller sieve 1
4 PP1315 Impact Crusher 4
5 2 # dust removal system 1
6 1 # dust removal system 1
7 RCVD-15 Separator 2
8 PE1215 Jaw Crusher 1
9 ZSW1560 Vibration feeder 1
10 3YK3073 Circular vibrating screen 2
COBALT CHROMIUM ALLOY ELGILOY :(Composition (Nominal): 40 Co ., 20 Cr., 15 Ni , 7 mo , Fe Balance ;( ELGILOY alloy exhibits high strength, ductility, fatigue life, and good mechanical properties. Corrosion resistant in numerous environments.:(Specifications: ASTM-F1058):(1. Mechanical Property can be improve with Cold Worked & Aged process; (2. Rod forms fully compliance with chemical component; :(3. Annealed possible for wire & Strip ;: (Product availability and request a QUOTE!
Elgiloy alloy property data sheet - product availability and request a QUOTE! :(Composition (Nominal): 40cobalt-20chromium-16iron-15nickel-7molybdenum ;( Elgiloy® alloy exhibits high strength, ductility, fatigue life, and good mechanical properties. Corrosion resistant in numerous environments.:(Specifications: ASTM-F1058):(1. Mechanical Property can be improve with Cold Worked & Aged process; (2. Rod forms fully compliance with chemical component; :(3. Annealed possible for wire & Strip
