Product index: XJ-201T XJ-201Q
Viscosity cst:700000-800000 1000000-1200000
Appearance: Microtransparent milky paste Microtransparent milky paste
Specific gravity:1.03-1.05 1.03-1.05
Product features:
XJ201T,XJ201Q silicone paste are a paste mixture prepared by thermal condensation of silicone oil with different viscosity (350CST, 1000CST, 60000-10000CST) in different proportions, supplemented by gas phase silica, T functional group, Q functional group silicone and special diffuser at high temperature. When used, it is supplemented by certain thickening agent. Emulsifier, etc., can be made into different uses of defoaming agent. Widely used in printing and dyeing, paper making, ore flotation, paint and so on, featuring fast defoaming speed, good dispersive performance and long foam suppression time.
Deoxidizer: Ferro silicon is used in the steelmaking industry as a precipitation deoxidizer and diffusion deoxidizer.
Reducing agent: high-silicon ferro silicon or siliceous alloys can be used as reducing agents for the production of low-carbon iron alloys in the ferroalloy industry.
Alloying agent: Ferro silicon can be used as alloying agent for low-alloy structural steel, composite steel, spring steel, bearing steel, heat-resistant steel and electric silicon steel smelting, to produce single crystal silicon or to prepare non-ferrous metal alloys.
Inoculant: adding ferro silicon to cast iron can be used as an inoculant for nodular cast iron to prevent the formation of
carbides, promote precipitation and spheroidization of graphite, thereby improving the properties of cast iron.
Coating: Ferro silicon powder can be used as a suspension phase in the beneficiation industry, and can be used as a coating for welding rods in the welding rod manufacturing industry.
CAS No.:61827-42-7 MF:RO.(C2H4O)n
Purity:99.5% Type:Absorbent Absorbent Variety: Activated Carbon
Usage:
Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals
Water content (%):â?¤1.0
Characteristic and Applications:
1. Easily dissolved in water, excellent property of emulsification, penetrability and humectation.
2. Used as abstergent, degreasing agent, refining agent, emulgator in textile industry and leather processing industry.
3. Have special emulsify effect to amido silicone oil and dimethyl silicone oil, improve efficacy after use.
4. Used as metal processing additive, multifunctional cleaning agent, decontaminate synergist, household cleaning agent and leaning agent for vehicle, public facility.
CAS No.:63148-62-9
Other Names:pdms
MF:(CH3)3SiO[(CH3)2SiO]nSi(CH3)3
EINECS No.:63148-62-9
Purity:99.9%
Place of Origin:Anhui, China
Type:silicone oil, Chemical polymer
Usage:Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Petroleum Additives, Surfactants, Water Treatment Chemicals
Brand Name:ZINCA
Model Number:ZINCA-z201
Product name:Polydimethylsiloxane
Viscosity:50 100 350 1000 cst
Apperance:Clear colorless liquid
Keywords:Dimethicone
Application:Cosmetics,hair, polish,lubricant, molding release etc.
Sample:Availabe
Storage:Cool and dry place
Silicone Oil is a non-hydrolyzed silicone surfactant with medium and high activity,used for soft polyurethane foaming.It is suitable for horizontal foaning ranging from low desity to medium desity. PL-5889 can be compatible with polyol mixtures and Various additives,to form a uniform nucleation system,the foam can form a fine and uniforma cell structure.meanwhile,it can ensure the normal foam permeability and provide high processing tolerance.
35040 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
Silicon metal is also called industrail silicon or crystalline silicon. It is siliver gray with metallic luster,when be processed into powder the coloure si dark grey. It has high melting point,good heat resistance and high resistivity.It is usually used in electro, metallurgy and chemical industry.It is the dispensable essential raw material in the hi-tech industry.
Features:
1.silicon is widely used in smelting alloy elements, as a reducing agent in many kinds of metal smelting.
2.silicon metal widely applied to refractory material and powder metallurgy industry to improve the heat resistance and oxidation resistance.
3.Inddustrial siliocn powder is regarded as alloy additive, impove the steel hrdenability in metallurgy and foundru industry.
4.It is mailnly used in production of alloys, polycrystalline silicon, organic silicon materials and high-grade refractor.
Model Chemical Composition%
Si Mg Ca Re Ba La Fe
BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance
BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance
BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance
BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance
BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance
BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance
BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance
Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm
Packing: 25kg woven plastic bag in 1mt jumbo bag.
Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition%
Si Mg Ca Re Ba La Fe
BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance
BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance
BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance
BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance
BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance
BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance
BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance
Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm
Packing: 25kg woven plastic bag in 1mt jumbo bag.
Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition%
Si Mg Ca Re Ba La Fe
BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance
BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance
BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance
BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance
BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance
BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance
BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance
Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm
Packing: 25kg woven plastic bag in 1mt jumbo bag.
Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics
1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed.
2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products.
3.High mechanical strength and strong deoxygenation and desulfuration effects.
(1) Ferrosilicon is an indispensable deoxidizer in the steelmaking industry. In steelmaking, ferrosilicon is used for precipitation deoxidation and diffusion deoxidation.
(2) Used as an inoculant and spheroidizing agent in the cast iron industry. In the production of nodular cast iron, 75 ferrosilicon is an important inoculant (helping to precipitate graphite) and nodulizer.
(3) Used as a reducing agent in the production of ferroalloys. Not only the chemical affinity between silicon and oxygen is great, but the carbon content of high-silicon ferrosilicon is very low.
Therefore, high-silicon ferrosilicon (or silicon alloy) is a commonly used reducing agent in the production of low-carbon iron alloys in the ferroalloy industry.
Ferrosilicon particle size: 0-1mm, 1-3mm, 3-10mm, 10-50mm, 50-100mm or customized.
High carbon silicon is a new type of alloy used in converters, and can also be called silicon-carbon alloy. It can replace ferrosilicon, silicon carbide, recarburizer, reduce the amount of deoxidizer, used in converter smelting deoxidation alloying process, the effect is stable, steel chemical composition, mechanical properties and internal control quality are better than traditional processes.
100:2 two-component liquid silicone rubber belongs to condensation type mold silicone rubber. When part A and B are mixed in 100:2 weight, the crosslinking reaction can occur, and the elastic body with certain hardness is formed after curing. It has many advantages, such as good fluidity, easy to operate with low viscosity. After curing, it has heat resistance, high temperature resistance, corrosion resistance, solvent resistance, high tensile and tear strength, low linear shrinkage, high turning model times. It is a cast of gypsum, cement, POLY-RESIN, PU, AB water, ABS material of the elastic mold material, it is widely used in the production and reproduction of sludge, toys, gifts, reliefs, statues, city sculpture, cement products, hand plate, car model, model of home appliances, mold products such as soap.
